• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.665-668
• /
• 2003

In this paper, we have designed and implemented the RAID controller board which connects to the host computer with serial ATA interface and connects to the disks with parallel ATA interface. Serial ATA interface is proposed to overcome the design limitation of parallel ATA while enabling the storage interface to scale with the slowing media rate demands for PC platforms. Serial ATA is to replace parallel ATA with the compatibility with existing operating systems and drivers, adding performance headroom for years to come. It Moreover, serial ATA provides even faster transfer rate of 150 Mbytes/s which is larger than that of current parallel ATA. The RAID controller board designed in this paper combines up to 4 disks with parallel ATA interface, and connects to PC host computer with serial ATA interface. We have implemented RAID controller using Verilog HDL language with FPGA chip. The RAID controller supports RAID level 0 and 1 functionality. Experimently, the average read/write performance of parallel ATA interface is about 30 Mbytes/s. Therefore, when 4 parallel disks is connected to the RAID controller board, we can get almost full throughput of serial ATA protocol using the RAID level 0 configuration with 4 disks.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.

• 산업기술연구
• /
• 제21권A호
• /
• pp.97-103
• /
• 2001

This paper presents the development of the I/O Interface for the real time parallel data communication between controller of a six-axis industrial robot(CRS-A460) and an external computer. The proposed I/O Interface consists of the hardware I/O interface and the software that is downloaded to the robot controller and executed by the controller operating system. The constitution of the digital I/O Port for CRS-A460 robot controller and the digital I/O board for IBM-PC are presented as well as the Process Control Program of the robot controller. The developed protocol for the parallel data communication is described. The data communication is tested, and the performance is analysed. In particular, it is shown that the real-time constraint of the robot controller process is satisfied.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.392-397
• /
• 1993

Generally machine tools can be divided into three components : NC Controller, the electrical drives and the mechanical transmission elements. For high speed, high precision machining, high performance control of servo system must be accommodated and one must carefully define the interface among three components. In this paper, we suggest a way to assist future development of CNC controller by investigating the characteristics resulting from different interface between CNC controller and servo system.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• 한국통신학회논문지
• /
• 제27권11C호
• /
• pp.1164-1170
• /
• 2002

ACE2000 MPLS시스템에서 MPLS 정합모듈은 ATM 정합모듈과 패킷 포워딩을 수행하는 HFMA(High performance Forwarding Engine and VC Merging board Assembly)모듈로 구성된다. MPLS 정합모듈에서 물리층으로 입력되는 셀은 HFMA의 송신 SAR칩(RSAR)에서 패킷으로 조립된 후 IP룩업 제어기에서 패킷 포워딩을 수행한다. 포워딩된 패킷은 ATM 계층으로 전달되기 위해 수신 SAR칩(TSAR)에서 셀로 다시 세그먼트된 후 ATM 셀 스위치로 전송하기 위해 ALMA(ATM Layer Module Assembly)로 전달된다. MPLS 정합모듈을 ATM 정합보듈로 이용할 때, ALMA는 직접 물리층 보드와 UTOPIA Leve12 인터페이스로 연결되며, 이때 ALMA는 Master Mode로 동작하게 된다 또한 MPLS 정합모듈에서 HFMA TSAR도 Master Mode로 동작하게 된다. 따라서 2개의 Master 모드 사이에서 인터페이스 역할을 수행할 수 있는 Slave 모드의 UTOPIA-L2 Controller가 요구된다. 본 논문에서는 Multi-Ports를 지원할 수 있는 UTOPIA-L2 Controller의 구조 및 셀 제어방법에 대해 고찰해본다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권4호
• /
• pp.213-219
• /
• 2000

In this paper, a controller design method is proposed for haptic interface considering transparency and robust stability. For this, a performance index for the transparency as performance measure is defined in the points of impedance matching and the optimal solution which is minimizing the performance index is obtained by solving H2 optimal problem. In haptic interface, the modeling uncertainties can be restricted to that of haptic device. To implement the robust stabilizing haptic controller to the uncertainties of haptic device, a robust stable condition using H$\infty$ norm from small gain theorem is proposed. To verify the effectiveness of the proposed haptic controller design scheme, numerical examples and experimental results are illustrated for virtual wall consisting of stiffness and damping factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1791-1794
• /
• 2006

For system-on-glass (SoG) with low-temperature poly-silicon (LTPS) thin film transistor (TFT), a new system interface architecture and timing controller are developed. With the newly developed system interface architecture, line memory can be eliminated which would take large area of SoG display panel. The system interface and timing controller are targeted for the application for 6-bit gray scale, 60-frames/s qVGA format.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.25.5-25
• /
• 2001

A haptic interface can be a passive system with virtual coupling as a filter virtual coupling has been designed for satisfying passivity. However, it affects transparency of haptic interface as well as stability. This paper suggests new design criterion of a haptic interface controller by considering transparency. As a result, sampling time and the range of impedance or admittance should be considered as well as virtual coupling for desired performance of hapticdisplay. And experiments show that the suggested design criterion can be applied successfully for desired performance.