• Journal of Power Electronics
• /
• v.7 no.4
• /
• pp.336-342
• /
• 2007

This paper presents the development of a fuel cell dynamic simulator using a programmable DC power supply and LabVIEW graphical user interface. The developed simulator closely describes the static and dynamic characteristics of an actual proton exchange membrance fuel cell (PEMFC). The experimental results are provided to verify the operation of the simulator. The developed simulator can be used as a convenient and economic alternative to an actual fuel cell for developing and testing a fuel cell power conditioning system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.294-299
• /
• 1999

In this paper, the calibration system for contact transducer has been developed to improve the reliability of the inspection result of ultrasonic testing on rotors. This system consists of signal processing parts: (oscilloscope, spectrum analyzer, pulser/receiver), standard block, and user interface program. Signal processing for the calibration system was performed quickly with high accuracy. The developed system has been applied to a practical calibration of probe using the non-destructive testing on rotors, and demonstrated high sensitivity and precision.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2319-2321
• /
• 2002

This paper suggests a computer-based on-line measurement method of tan$\delta$ and capacitance for HV capacitor. The method employs V-I technique using scaled down analog voltage and current signal obtained by digital oscilloscope. The measurement results are displayed by graphic user interface with graphic language. Field tests were tarried out at 6.6kV testing voltage in Samhwa Capacitor company.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.157-163
• /
• 2000

Testing evaluation is a part of process for design, production, evaluation, operation and abolition, and is the process of certifying system performance. The main purpose of testing evaluation is to reduce the risk factor under the determining process. Testing process has the three step such as design qualification, integration and validation test in factory, system integration and commissioning test. Design Qualification is to verify errors on the design process. Integration and validation test in factory is for the H/W and S/W of an equipment and is to verify interface of subsystem, communication protocol and main functions. System integration and commissioning test is a functional test to adjust successful installation of equipment. According to the testing process, briefly consideration for test item, test method and test contents about signalling system is carried out.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2022

Recently, a large number of cryptocurrencies and block chains have been continuously released. However, these cryptocurrencies and block chains are open to users without authorized verification and testing procedures, causing various reliability problems. Existing cryptocurrencies and blockchain test methods build a blockchain Testnet for a certain period of time by the developer without external verification by a third party, and after repeatedly self-testing and self-operating processes, commercialization is in progress by switching to the Mainnet. This self-verification method does not guarantee objectivity and publicness, and high reliability of customers cannot be realized. This study proposes a cryptocurrency and blockchain test interface and test control system as a third-party open test method.

• Advances in materials Research
• /
• v.1 no.2
• /
• pp.147-160
• /
• 2012

In the present study, diffusion bonding was carried out between AZ31B magnesium and AA2024 aluminium in the temperature range of $405^{\circ}C$ to $475^{\circ}C$ for 15 min to 85 min and 5MPa to 20 MPa uniaxial loads was applied. Interface quality of the joints was assessed by microhardness and shear testing. Also, the bonding interfaces were analyzed by means of optical microscopy, scanning electron microscopy, energy dispersive spectrometer and XRD. The maximum bonding and shear strength was obtained at $440^{\circ}C$, 12 MPa and 70 min. The maximum hardness values were obtained from the area next to the interface in magnesium side of the joint. The hardness values were found to decrease with increasing distance from the interface in magnesium side while it remained constant in aluminium side. It was seen that the diffusion transition zone near the interface consists of various phases of $MgAl_2O_4$, $Mg_2SiO_4$ and $Al_2SiO_5$.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.59-69
• /
• 2009

In this paper, Integrated development environments interface was designed and implemented for the integrated development environments. By using connection interface, Integration between physical prototyping and virtual prototyping which has different characteristics each other could be possible. Specially, good performance of the connection interface was showed by testing result of operation implemented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.415-423
• /
• 2001

In is well recognized that the ultrasonic method is one of the most common and reliable nondestructive testing(NDT) methods for the quantitative estimation of defects in welded structures. However, NDT techniques applying for adhesively bonded joints have not been clearly established yet. In this paper, the detection of interface crack by the ultrasonic method was applied for the measurement of interface crack length in the adhesively bonded joints of double-cantilever beam(DCB). The optimum condition of transmission coefficients and experimental accuracy by the ultrasonic method in the adhesively bonded joints have been investigated. The experimental values are in good agreement with the computed results by boundary element method(BEM) and Riplings equation.

• MALSORI
• /
• no.67
• /
• pp.103-120
• /
• 2008

Basic components for multimodal interface, such as speech recognition, speech synthesis, gesture recognition, and multimodal fusion, have their own technological limitations. For example, the accuracy of speech recognition decreases for large vocabulary and in noisy environments. In spite of those technological limitations, there are lots of applications in which speech-oriented multimodal user interfaces are very helpful to users. However, in order to expand application areas for speech-oriented multimodal interfaces, we have to develop the interfaces focused on usability. In this paper, we introduce usability and user-centered design methodology in general. There has been much work for evaluating spoken dialogue systems. We give a summary for PARADISE (PARAdigm for Dialogue System Evaluation) and PROMISE (PROcedure for Multimodal Interactive System Evaluation) that are the generalized evaluation frameworks for voice and multimodal user interfaces. Then, we present usability components for speech-oriented multimodal user interfaces and usability testing guidelines that can be used in a user-centered multimodal interface design process.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.2
• /
• pp.33-37
• /
• 2008

To keep the online medical records available to anyone without constraint of time and space, introducing EMR (Electronic medical record), which is a clinical support management system. The purpose of this study is to develop interface standard of clinical test device. Integration and sharing of medical information is faced with enormous obstacles because medical organizations and associated companies are separately developing the interface. I hope that multi-function management system with workstation concept is operated to efficiently transmit clinical device result data based on this study. Transfer of precise medical result data available for decision making will improve quality of health care service.