• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.530-534
• /
• 2002

This paper show serial communication method in order to design how to interface between fault tolerant systems with redundancy. Problem has been in the method that fault tolerant system had switched of serial data with common switching device. This problem degrade reliability in itself and total system which is interfaced with that serial communication system. So Arbitration module of serial communication which is suggested in this paper can improve the reliability using voter algorithm which fault is detected passively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.269-275
• /
• 2000

The railway signaling system consists of microcomputerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control. Therefore it is important to validate the required functions of developed system and interface between developed signaling systems. To verify the conditions and functions of signaling logic, the laboratory prototype test bench, which consists of personal computers with software module and Ethernet LAN, will be developed. In this paper general design of signaling system test bench for high-speed rail is described and developed software module is presented.

• 스마트미디어저널
• /
• 제9권4호
• /
• pp.73-80
• /
• 2020

With the advent of the Internet era, consumer lifestyles have been changed tremendously, and mobile payment has carried out an increasingly extensive coverage of the people's life trajectory. Taking the design of the mobile payment interface as an example, we use a conjoint analysis method to survey college students in Guangxi, where questionnaires are collected from 270 people in different groups according to gender. The method separates the attributes that affect consumer choice of mobile payment interface design and the utility value of the attribute level to analyze consumer needs and preferences, and then obtains consumers' potential evaluation criteria for mobile payment interface design. The results of the study show that the attributes that influence consumers' choice of mobile payment interface design are, in order of preference: page layout, identification convenience, verification, module distribution, entertainment, and information encryption. Consumer groups of different genders show differences in their preferences in the mobile payment interface design and Consumer needs reflect consumer psychology. Several findings are obtained on the consumers' preferences on the mobile payment interface design, which may be used to improve future design processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.275-277
• /
• 2005

In a lithium-ion battery which is being used in many portable electronic goods, electrolyte is disaggregated and then the gas is happened when electric charging volt is over the 4.5V. So, the pressure on the safety valve is increased and electrolyte is leaked out in the cell. It leads to the risk of explosion. On the other hand, in the case which the battery is discharged excessively, the negative pole is damaged and the performance of the battery is deteriorated. The protection module of a lithium-ion battery is used for preventing such risk and the inspection system is needed to check the performance of such protection module. In this research, a PC-based auto inspection system is developed for the inspection of a battery protection module using Dallas chipset. In the inspection system, AVRl28 chip is used as a controller and the communication protocol is developed for the data communication between the protection module and the AVR128 chip. And GPIB interface is used for the control of measuring devices. Also, MMI environment is developed using LabView for convenient monitoring by the tester.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.539-545
• /
• 2011

This paper describes an intelligent service robot system for managing a store in an unmanned environment. The robot can be a good replacement for humans because it is possible to work all day and to remember lots of information. We design a system architecture for configuring many intelligent functions of intelligent service robot system which consists of four layers; a User Interaction Layer, a Behavior Scheduling Layer, a Intelligent Module Layer, and a Hardware Layer. We develop an intelligent service robot 'Part Timer' based on the designed system architecture. The 'Part Timer' has many intelligent function modules such as face detection-recognition-tracking module, speech recognition module, navigation module, manipulator module, appliance control module, etc. The 'Part Timer' is possible to answer the phone and this function gives convenient interface to users.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1285-1288
• /
• 2002

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to- multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module was developed based on IP reuse. So Interface of each module such as link controller UART, and audio CODEC is designed based on ARM7 comfortable processor. We also considered various interfaces of related external chips. The fully synthesizable baseband module was fabricated in a $0.25{\mu}m$ CMOS technology occupying $2.79{\times}2.8mm^2$ area including the ARM TDMI processor. And a FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• 한국항해항만학회지
• /
• 제26권4호
• /
• pp.419-426
• /
• 2002

기존 RTK-GPS(Real Time Kinematic-Global Positioning System)는 고가의 장비인 RF(Radio Frequency) 방식의 무선 모뎀을 사용하므로 사용자의 무선국 허가, 전파의 지리적 장애물에 의한 영향, 전송거리의 제한, 주파수 혼신, 주파수 자원의 유한성 등의 문제점이 있다. 본 논문에서는 이런 문제점을 해결하기 위해서 RTK-GPS 수신기의 무선 모뎀을 대체할 수 있는 방법으로 휴대전화를 이용한 DGPS 수신기와의 보정신호 전송기법을 설계하고, RTK-GPS 수신기와 휴대전화간의 연동을 위한 인터페이스 모듈의 설계 및 PIC(Programmable Integrated Circuit)를 이용한 하드웨어 모듈을 구현하였다. 그 결과 인터페이스 모듈은 GPS 수신기와 휴대전화간의 인터페이스 모듈로서 RS-232C와 통신 제어를 통한 보정신호의 전송을 가능함과 이동국에서는 송신 및 수신 된 보정신호 데이터를 이용하여 상대 측위를 통한 정밀한 측위가 이루어짐을 얻었다. 기준국과 이동국의 휴대전화를 연동한 인터페이스 모듈 시스템은 기존의 RF 방식의 무선 모뎀 시스템과 비교하여 거의 동일한 정밀도를 얻을 수 있었다.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.21-28
• /
• 2001

Major deficiencies of current automation scheme including various robots for bioproduction include the lack of task adaptability and real time processing, low job performance for diverse tasks, and the lack of robustness of take results, high system cost, failure of the credit from the operator, and so on. This paper proposed a scheme that could solve the current limitation of task abilities of conventional computer controlled automatic system. The proposed scheme is the man-machine hybrid automation via tele-operation which can handle various bioproduction processes. And it was classified into two categories. One category was the efficient task sharing between operator and CCM(computer controlled machine). The other was the efficient interface between operator and CCM. To realize the proposed concept, task of the object identification and extraction of 3D coordinate of an object was selected. 3D coordinate information was obtained from camera calibration using camera as a measurement device. Two stereo images were obtained by moving a camera certain distance in horizontal direction normal to focal axis and by acquiring two images at different locations. Transformation matrix for camera calibration was obtained via least square error approach using specified 6 known pairs of data points in 2D image and 3D world space. 3D world coordinate was obtained from two sets of image pixel coordinates of both camera images with calibrated transformation matrix. As an interface system between operator and CCM, a touch pad screen mounted on the monitor and remotely captured imaging system were used. Object indication was done by the operator’s finger touch to the captured image using the touch pad screen. A certain size of local image processing area was specified after the touch was made. And image processing was performed with the specified local area to extract desired features of the object. An MS Windows based interface software was developed using Visual C++6.0. The software was developed with four modules such as remote image acquisiton module, task command module, local image processing module and 3D coordinate extraction module. Proposed scheme shoed the feasibility of real time processing, robust and precise object identification, and adaptability of various job and environments though selected sample tasks.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1157-1158
• /
• 2008

This paper describes the interface designs of Optical-Camera Electronic unit with a DFPA(Detector Focal Plane Assembly) and IDHU(Image Data Handling Unit) which meet the top-level requirement of a satellite system. Especially, the designs on the image format and timing of the Header information for the correct reconstruction of the image in the Groundstation are explained in detail.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.349-352
• /
• 2001

As microprocessor and SOC (System On a Chip) performance moves into the GHz speed, the high-speed asynchronous design is becoming challenge due to the disadvantageous power and speed aspects in synchronous designs. The next generation on-chip systems will consist of multiple independently synchronous modules and asynchronous modules for higher performance, so the interface module for data transfer between multiple clocked IPs is designed with Xilinx FPGA and simulated with RISC microprocessor.