• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.288-292
• /
• 1998

The p*-n ultra shallow junction diode with Co/Ti bilayer silicide was formed by ion implantation of $BF_{2}$ energy : 30KeV, dose : $5\times10^{15}cm^{-2}$] onto the n-well Si(100) region and RTA-silicidation of the evaporated Co($120\AA$)/Ti($40\AA$) double layer. The fabricated diode exhibited ideality factor of 1.06, specific contact resistance of $1.2\times10^{-6}\Omega\cdot\textrm{cm}^2$ and leakage current of $8.6\muA/\textrm{cm}^2$(-3V) under the reverse bias of 3V. The sheet resistance of silicided emitter region, the boron concentration at silicide/Si interface and the junction depth including silicide layer of ($500\AA$ were about $8\Omega\Box$, $6\times10^{19}cm^{-3}$, and $0.14\mu{m}$, respectively. In the fabrication of diode, the application of Co/Ti bilayer silicide brought improvement of ideality factor on the current-voltage characteristics as well as reduction of emitter sheet resistance and specific contact resistance, while it led to a little increase of leakage current.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.23-32
• /
• 2022

Although PSCB girder bridges account for 4% of the bridges in use on highways, they do not account for much, but 98% of PSCB girder bridges are 1^st type and 2^nd type of bridge. Also, the total length of the PSCB girder bridge is 16% (192km) of the total length of the highway bridge. Thus, the PSCB girder bridge can be one of the bridge types where maintenance is important. In order to analyze the damage types of PSCB girder bridges, a detailed analysis was conducted by selecting 62 places (477 spans) precision safety diagnosis reports considering ratio of the construction method and snow removal environment exposure class. Analysis of report and a field investigation was conducted, and as a result, most of the causes of deterioration damage were caused by rainwater (salt water) flowing into the bridge pavement soaking in between the top flange and the interface. After concrete slab deteriorate occurred then bridge pavement cracking and breaking increased and exfoliation of concrete occurred by corrosion and expansion of the reinforcing bars occurred. In addition, the cause of cracks in the longitudinal direction on the bottom of the top flange is considered to be cracks caused by restrained drying shrinkage. In conclusion, for reasonable maintenance considering the characteristics of PSCB girder bridges, it should be suggested in the design aspect that restrained drying shrinkage crack on top flange. Also, it is believed that differentiated maintenance method should be proposed according to snow removal environment exposure class.

• Journal of Korea Game Society
• /
• v.10 no.2
• /
• pp.49-56
• /
• 2010

In this paper, we propose a control method of virtual hand by the recognition of a user's hand in the virtual reality game environment. We display virtual hand on the game screen after getting the information of the user's hand movement and the direction thru input images by camera. We can utilize the movement of a user's hand as an input interface for virtual hand to select and move the object. As a hand recognition method based on the vision technology, the proposed method transforms input image from RGB color space to HSV color space, then segments the hand area using double threshold of H, S value and connected component analysis. Next, The center of gravity of the hand area can be calculated by 0 and 1 moment implementation of the segmented area. Since the center of gravity is positioned onto the center of the hand, the further apart pixels from the center of the gravity among the pixels in the segmented image can be recognized as fingertips. Finally, the axis of the hand is obtained as the vector of the center of gravity and the fingertips. In order to increase recognition stability and performance the method using a history buffer and a bounding box is also shown. The experiments on various input images show that our hand recognition method provides high level of accuracy and relatively fast stable results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1898-1905
• /
• 2012

This paper presents an On-board Smart Device (OSD) for moving vehicle, based on a smooth integration of Android-based devices and a Micro-control Unit (MCU). The MCU is used for the acquisition and transmission of various vehicle-borne data. The OSD has threefold functions: Record, Report and Alarm. Based on these RRA functions, the OSD is basically a safety and convenience oriented smart device, where it facilitates alert services such as accident report and rescue as well as alarm for the status of vehicle. In addition, voice activated interface is developed for the convenience of users. Vehicle data can also be uploaded to a remote server for further access and data manipulation. Therefore, unlike conventional blackboxes, the developed OSD lends itself to a user-friendly smart device for vehicle safety: It basically stores monitoring images in driving plus vehicle data collection. Also, it reports on accident and enables subsequent rescue operation. The developed OSD can thus be considered an essential safety smart device equipped with comprehensive wireless data service, image transfer and voice activated interface.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.502-514
• /
• 2002

The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

• Journal of KIISE:Software and Applications
• /
• v.27 no.2
• /
• pp.193-200
• /
• 2000

The extraction of face regions is required for Head Gesture Interface which is a natural user interface. Recently, many researchers are interested in using color information to detect face regions in image sequences. Two most widely used color models, HSI color model and YIQ color model, were selected for this study. Actually H-component of HSI and I-component of YIQ are used in this research. Given the difference in the color component, this study was aimed to compare the performance of face region detection between the two models. First, we search the optimum range of facial color for each color component, examining the detection accuracy of facial color regions for variant threshold range about facial color. And then, we compare the accuracy of the face box for both color models by using optimal facial color and motion information. As a result, a range of $0^{\circ}{\sim}14^{\circ}$ in the H-component and a range of $-22^{\circ}{\sim}-2^{\circ}$ in the I-component appeared to be the most optimum range for extracting face regions. When the optimal facial color range is used, I-component is better than H-component by about 10% in accuracy to extract face regions. While optimal facial color and motion information are both used, I-component is also better by about 3% in accuracy to extract face regions.

• Journal of KIISE:Software and Applications
• /
• v.33 no.1
• /
• pp.32-43
• /
• 2006

Enterprise JavaBeans (EJB) has been accepted for supporting Component-Based Development (CBD). A component is a large-grained reuse unit consisting of several objects; however, an enterprise bean in EJB is a unit of atomic object and so multiple enterprise beans should be composed to support larger-grained reuse. Therefore, we need practical methods for designing and implementing components with EJB. In this paper, we propose instructions and techniques for designing CBD elements with EJB constructs. That is, we define methods for designing and implementing single and composite components, white- and black-box components, multiple interfaces, and variability mechanism in EJB platform. We evaluate the proposed method by performing a case study and comparing the characteristics of CBD components with the method. Consequently, the method is supposed to improve reusability, applicability, portability of components in EJB platform.

• The Journal of Information Technology and Database
• /
• v.2 no.2
• /
• pp.25-34
• /
• 1995

In this paper, we present design philosophy and implementation issues of a functionality testing tool for object-oriented database systems. A testing tool has been developed to validate UniSQL/X functionalities with C++ interface. A testing tool is designed under consideration of scaleability, simplicity and extendibility. The schema is deliberately constructed to verify the object-oriented functionalities such as abstraction, inheritance and aggregation. Each test item has been derived under various black box techniques such as equivalent partitioning and boundary-value analysis. The testing tool consists of six phases, namely, database creation, database population, construction of testindex, compilation and link, execution and result reporting, and final cleanup. The prototype provides more than 140 test items at 90 programs.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.65-69
• /
• 2012

Environmental and health concerns over the lead have led to investigation of the alternative Pb-free solders to replace commonly used Pb-Sn solders in microelectronic packaging application. The leading candidates for lead-free solder alloys are presently the near eutectic Sn-Ag-Cu alloys. Therefore, extensive studies on reliability related with the composition have been reported. However, the insufficient drop property of the near eutectic Sn-Ag-Cu alloys has demanded solder compositions of low Ag content. In addition, the solder interconnections in automobile applications like a smart box require significantly improved vibration resistance. Therefore, this study investigated the effect of alloying elements (Ag, Bi, In) on the vibration fatigue strength. The vibration fatigue was conducted in 10~1000Hz frequency and 20Grms. The interface of the as-soldered cross section close to the Cu pad indicated the intermetallic compound ($Cu_6Sn_5$) regardless of solder composition. The type and thickness of IMC was not significantly changed after the vibration test. It indicates that no thermal activities occurred significantly during vibration. Furthermore, as a function of alloying composition, the vibration crack path was investigated with a focus on the IMCs. Vibration crack was initiated from the fillet surface of the heel for QFP parts and from the plating layer of chip parts. Regardless of the solder composition, the crack during a vibration test was propagated as same as that during a thermal fatigue test.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1767-1777
• /
• 2010

In digital TV broadcasting, such as terrestrial, cable, satellite, and IPTV, the head-end of digital TV broadcasting has a more complicated transmission structure than that of analog TV broadcasting. Furthermore, digital TV broadcasting has a feature that supports multiplex models, such as Multiple Program Transport Stream (MPTS). Therefore, the purpose of our work was to design and examine a more efficient new system of emergency alert message transmission to support the digital TV broadcasting environments. Digital TV broadcasting is the IP generation or RF transmission of 8-VSB, QAM, and QPSK modulated through a multiplexer or re-multiplexer multiplexed stream as a MPEG-2 Transport Stream after content encoding. The new system proposed in this paper transmits an emergency alert message without scrambling after replacing the PID and payload of the -packet with the message prototype in the TS stream from the multiplexer. If we need to transmit an emergency alert message under digital TV broadcasting services, then the receiver first checks the PID of each packet in the TS stream for the emergency alert message. Next, if a packet is determined to be an emergency alert message, then the set-top box displays the message on the TV screen using its function of On Screen Display, or the PC based software displays the message on the monitor screen using its function of overlay with user interface if the packet is found to be an emergency alert message. We have designed an emergency alert message protocol and a system model. By experiments and analysis of the system, we concluded that the system achieved efficiency and the ability to send and receive emergency alert messages using the system under different digital TV broadcasting service environments.