• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권3호
• /
• pp.227-240
• /
• 2003

자바 기반의 분산객체 시스템을 개발 혹은 사용할 때, 시스템 개발자는 사전에 정의된 인터페이스를 구현한 분산객체를 네트워크상에 배치(deploy)해야 하고, 시스템 사용자는 분산객체에 대한 참조(reference)를 획득하고 인터페이스 타입으로 변환한다 이러한 작업을 위해서 인터페이스의 공유는 필수적이다. 본 논문에서는 Jini 시스템 개발 시 정보 공유의 불편함을 해결하고자 IRSJ(interface repository service based on jim)를 제안한다. IRSJ는 Jini 시스템과 인터페이스 공유 서비스를 위한 자바 클래스들로 구성된다. IRSJ는 근거리에서 작업할 때 검색(lookup) 서버나 작성자의 정보 없이도 인터페이스 파일을 검색할 수 있다. 원거리에서 개발 팀들이 공동 작업을 수행한다면 검색(lookup) 서비스가 실행되고 있는 서버의 주소만으로도 인터페이스 검색이 가능하다 검색에 실패한 인터페이스 객체는 원격 이벤트 모델 을 사용하여 더 이상의 검색 요청을 하지 않아도 인터페이스를 다운로드 받아 사용할 수 있게 하였다. 메시지 서비스는 인터페이스 검색에 실패하면 IRSJ를 사용하는 개발팀원 모두에게 자동적으로 인터페이스요청 메시지를 전송하여 빠른 시간 안에 인터페이스 공유가 가능하도록 설계되었다.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.137-147
• /
• 1997

신구콘크리트 계면(접합부)의 전단강도 측정을 목적으로 보시험체를 사용한 정하중 및 피로하중의 재하실험이 수행되었다. 총 13개의 시험체중에서 정적재하실험을 통하여 5개 시험체의 전단강도를 측정하였고, 8개의 시험체는 2,000,000회 또는 3,000,000회의 반복하중을 가력한 후 전단강도를 측정하였다. 실험변수는 접합부거칠기, 전단보강철근 및 시구콘크리트간 부착력의 유무이었다. 정적재하실험에서, 접합부가 거칠면서 콘크리트간 부착력이 존재한 시험체의 경우, 평균전단강도는 $61kgf/cm^2$이었다. 유사한 조건의 시험체의 3,000,000회의 전단하중을 가력한 피로하중실험에서 접착부의 열화현상은 나타나지 않았다. 이 때 반복가력된 최대전단응력은 $20kgf/cm^2$으로 전단강도의 약 1/3수준이었다. 접합부가 거칠게 처리되지 않은 시험체와 접합부는 거칠지만 콘크리트간 부착력이 인위적으로 제거된 시험체의 경우에는 전단보강철근을 사용하여도 피로하중에 의한 접합부의 열화현상이 나타났다.

• KIEAE Journal
• /
• 제8권3호
• /
• pp.37-42
• /
• 2008

The purpose of this study was to comprehend specific characteristic of interface and present the standardized interface of Long Life Housing, which could be obtained by the total and various approaches. With this in mind we analyzed related studies of interface through previous studies, and based on the analysis we created standardized factors of categorization in view of characteristic of interface. Using these factors, we can determine whether the interface could be used systematically in Long Life Housing. And as these were presented in the form of Key Map for expedite the synthetic understanding of interface, we could easily reconize types of interface. Especially, we only dealt the wall of flexible interface of Long Life Housing. Throughout systemizing and standardizing works, we can expedite the understanding of interface of Long Life Housing and finally, we want to make basic data used for date base of interface which can be available for Long Life Housing.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.582-590
• /
• 2007

Imperfectly jointed interface serves as mechanical waveguide for elastic waves and gives rise to two distinct kinds of guided wave propagating along the interface. Contact acoustic nonlinearity (CAN) is known to plays major role in the generation of these interface waves called generalized Rayleigh waves in non-welded interface. Closed crack is modeled as non-welded interface that has nonlinear discontinuity condition in displacement across its boundary. Mathematical analysis of boundary conditions and wave equation is conducted to investigate the dispersive characteristics of the interface waves. Existence of the generalized Rayleigh wave(interface wave) in nonlinear contact interface is verified in theory where the dispersion equation for the interface wave is formulated and analyzed. It reveals that the interface waves have two distinct modes and that the phase velocity of anti-symmetric wave mode is highly dependent on contact conditions represented by linear and nonlinear dimensionless specific stiffness.

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.265-279
• /
• 2022

The roughness of substrate concrete interfaces before new concrete placement has a major effect on the interface bond behaviour. However, there are challenges associated with the consistency of the final roughness interface prepared using conventional roughness preparation methods which influences the interface bond performance. In this study, five quantitative interface roughness textures with different roughness tooth angles, depths, and tooth distribution were created to ensure consistency of interface roughness and to evaluate the bond behaviour at a precast and new concrete interface using the splitting tensile test, slant shear test, and double-shear test. In addition, smooth interface specimens and two separate the pitting interface roughness were also utilized. Obtained results indicate that the quantitative roughness has a very limited effect on the interface tensile bond strength if no extra micro-roughness or bonding agent is added at the interface. The roughness method however causes enhanced shear bond strength at the interface. Increased tooth depth improved both the tensile and shear bond strength of the interfaces, while the tooth distribution mainly influenced the shear bond strength. Major failure modes of the test specimens include interface failure, splitting cracks, and sliding failure, and are influenced by the tooth depth and tooth distribution. Furthermore, the interface properties were obtained and presented while a comparison between the different testing methods, in terms of bond strength, was performed.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1845-1852
• /
• 2001

This paper deals with the experiment to obtain quantitative information about conditions of the interface between a water drop and surrounding oil. Velocity distributions in very close region of the interface are measured by introducing a new illumination technique and a telecentric lens. It enables precise measurements of velocity distributions in the close region to the interface. Although the measured velocity distributions exhibit strong influence from the solid wall of an experimental tube, the coincidence of inner and outside velocities on the interface is clearly confirmed for the clean interface. The shearing stresses on the interface, which are proportional to the velocity gradient normal to the interface, clearly show conditions of contaminated interface, which can be divided into two parts. From front stagnation point to somewhere near a separation point, the distribution of shearing stresses is well coincide with that of the Hadamard's analytical solution, while the distribution on the latter part of the interface sows quite different feature, which is supposed to be strongly influenced by contamination of the surface.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.90-94
• /
• 1998

This study aims at analyzing to treeing in the solid-solid interface which is insulation type of cable junction parts, the proceeding of tree-growth and electrical breakdown were research in the study. Interface was made artificially to detect how it influenced the insulating ability of the whole system, the specimen were XLPE generally used in cable. The interface conditions were divided into two parts. First condition being the one focused on the surface of interface, it was treated with sand paper (#80, #600, #1200). For the second condition, the pressure of interface was varied as the value of 1, 5, 10 [$kg/cm^2$]. Using above conditions, treeing and breakdown properties on tree-growth were respectively compared in details. As a result, breakdown time was shorter for the full range of supplied voltage in the case of interface existed in the joint than non-existed interface. In the case of existed interface, the interface which had high-interface pressure and painted with silicon insulating oil was the best in the aspect of breakdown characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.120-123
• /
• 2000

In this paper, A target architecture and interface synthesizer are proposed for processor-embedded codesign. The target architecture has the form of ARM processor based on AMBA. The interface synthesizer automatically generates an interface circuit for the communication between HW and SW. A memory map is used as the communication channel and an interrupt-based interface is applied for synchronized communication between HW and SW modules. In order to verify the function and performance of proposed target architecture and the interface synthesizer, practical test example is applied. Experimental results show the proposed interface synthesizer functioned correctly in the HW/SW codesign environment.

• 한국통신학회논문지
• /
• 제35권7B호
• /
• pp.1009-1017
• /
• 2010

Offering of different attractive opportunities by different wireless technologies trends the convergence of heterogeneous networks for the future wireless communication system. To make a seamless handover among the heterogeneous networks, the optimization of the power consumption, and optimal selection of interface are the challenging issues. The access of multi interfaces simultaneously reduces the handover latency and data loss in heterogeneous handover. The mobile node (MN) maintains one interface connection while other interface is used for handover process. However, it causes much battery power consumption. In this paper we propose an efficient interface selection scheme including interface selection algorithms, interface selection procedures considering battery power consumption and user mobility with other existing parameters for overlaying networks. We also propose a priority based network selection scheme according to the service types. MN‘s battery power level, provision of QoS/QoE and our proposed priority parameters are considered as more important parameters for our interface selection algorithm. The performances of the proposed scheme are verified using numerical analysis.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.47-57
• /
• 2009

Computing environments are being more and more various due to the development of technologies. While existing computing environments used for fixed locations or particular purposes by requesting big scale monitors or complicate calculation performance, recent computing environments are used for a variety of locations and for a diversity of purposes by using various devices. Because of the needs, digital device convergence, which emphases portability and mobility, came out. However, almost researches for user interface are performed for big scale monitors or complicate calculation performance until now. By the reason, user interface on each small device is different from others, or is not appropriate for the purpose of small device. Therefore, this research is to design Zoomable User Interface (ZUI) that adapts for small devices by adding the existing user interface on small devices and haptic technologies, and to implement a user interface for PDA devices.