• 한국전산구조공학회논문집
• /
• 제25권6호
• /
• pp.469-476
• /
• 2012

본 논문에서는 대규모 구조해석을 위하여 국부(local) 및 전역-국부 혼합(mixed) Lagrange 승수(Lagrange multiplier)를 이용한 새로운 유한요소 영역분할 기법을 제시한다. 제시되는 FETI 알고리즘은 계산 효율성을 향상시키기 위하여 기존의 FETI 기법들에서 사용되어 온 전통적인 Lagrange 승수법과는 달리, 국부 및 전역-국부 혼합 Lagrange 승수를 도입하고 ALF(Augmented Lagrangian Formulation)과의 결합을 유도하여 공유면 문제(interface problem)의 해의 수렴성을 향상 시켰다. 추가적으로, 몇 가지 수치예제 계산을 통해 기존의 FETI-DP 기법과 비교하여 유연도 행렬의 조건수, 계산 시간 그리고 메모리 사용량에 대한 계산결과를 제시하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.177-189
• /
• 2015

This paper presents an all-direct domain decomposition approach for large-scale structural analysis. The proposed approach achieves computational robustness and efficiency by enforcing the compatibility of the displacement field across the sub-domain boundaries via local Lagrange multipliers and augmented Lagrangian formulation (ALF). The proposed domain decomposition approach was compared to the existing FETI approach in terms of the computational time and memory usage. The parallel implementation of the proposed algorithm was described in detail. Finally, a preliminary validation was attempted for the proposed approach, and the numerical results of two- and three-dimensional problems were compared to those obtained through a dual-primal FETI approach. The results indicate an improvement in the performance as a result of the implementing the proposed approach.

• 대한기계학회논문집A
• /
• 제31권12호
• /
• pp.1144-1149
• /
• 2007

Experimental studies on the fabrication of sub-30 nm nanofibers using weakly two-photon induced photopolymerized region have been carried out. For the generation of nanofibers inside or outside microstructures, an over-polymerizing method involving a long exposure technique (LET) was proposed. Such nanofibers can find meaningful applications as bio-filters, mixers, and many other uses in diverse research field. A multitude of nanofibers with a notably high resolution (about 22 nm) in two-photon polymerization was achieved using the LET. Furthermore, it was demonstrated that the LET can be employed for the direct fabrication of various embossing patterns by controlling the exposure duration and the interval between yokels. Thin interconnecting networks are formed regularly in the boundary of the over-polymerized region, which allows for the creation of various pattern shapes. Overall of this work, some patterns including nanofibers are fabricated by the LET.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.381-388
• /
• 2000

Ceramic foam prepared with cordierite as a starting material by foam method was tested to evaluate the feasibility as a filter for the dust collection in hot gas. Two different types of agents Benzethonium chloride (BZTC, C27H42NO2Cl) and Sodium Lauryl Sulfate(SLS, CH3(CH2)11OSO3Na) were used as foaming agents in foaming process. Porosityof ceramic foam was about 80% and mean pore size were 100${\mu}{\textrm}{m}$ for SLS agent and 200 ${\mu}{\textrm}{m}$ for BZTC. It was observed that ceramic foam was composed of continuous macro-pore structure with opening windows interconnecting macro-pores. The surface of ceramic foam support of was coated with cordierite particles ranged from 20${\mu}{\textrm}{m}$ to 50${\mu}{\textrm}{m}$ Meso-pore size in the coating layer on ceramic foam was below 10${\mu}{\textrm}{m}$. While air permeability of the support increased with increasing macro-pore size coated ceramic filters showed a constant permeability without regard to the macro-pore size of the support. The permeabuilities of support varied in the range of 600$\times$10-13m2 to 1000$\times$10-13m2. For the case of coated ceramic filter it was about 200$\times$10-13m2. As a result of particle trapping test by using fly ash the particle removal efficiency was over the 99.9%.

• Current Photovoltaic Research
• /
• 제5권3호
• /
• pp.95-99
• /
• 2017

The interconnecting shingled solar cells method shows extremely high ratio active area per total area and has the excellent potential for high power PV (photovoltaic). Compared to the conventional module, it can have much more active area due to busbar-free structure. The properties of ECA (electrically conductive adhesives) are significant to fabricate the shingled array PV since it should be used in terms of electric and structural connection. Various ECA were tried and characterized to optimize the soldiering conditions. The open circuit voltage of shingled array cells showed a three-fold increase and efficiency was also increased by 1.63%. The shingled array cells used in CE3103WLV showed the highest power and in CA3556HF the lowest curing temperature and very fast curing time.

• 설비공학논문집
• /
• 제19권3호
• /
• pp.275-283
• /
• 2007

An experimental study was conducted to investigate the effect of the morphology of CNT (Carbon Nanotube) on the thermal conductivity of suspensions. The effective thermal conductivities of the samples were measured using a steady-state cut bar apparatus method. Enhancements based on the thermal conductivity of the base fluid are presented as functions of both the volume fraction and the temperature. Although functionalized SWNT (Single-Walled Carbon Nanotube) produced more stable and homogeneous suspensions, the addition of small amounts of surfactant to suspensions of 'as produced' SWNT demonstrated a greater increase in effective thermal conductivity than functionalized SWNT alone. The effective thermal conductivity enhancement corresponding to 1.0% by volume approached 10%, which was observed to be lower than expected, but more than twice the values, 3.5%, obtained for similar tests conducted using aluminum oxide suspensions. However, for suspensions of MWNT (Multi-Walled Carbon Nanotube), the degree of enhancement was measured to be approximately 37%. It was postulated that the effect of clustering, resulting from the multiple heat-flow passages constituted by interconnecting neighboring CNT clusters, played an important role in significant enhancement of effective thermal conductivity.

• 연구논문집
• /
• 통권24호
• /
• pp.63-79
• /
• 1994

This article reports a experimental study of the method to achieve a bond joint at lower temperature in a short time. DC magnetron sputtering of Sn, Sn/Pb, Sn/In and Sn/Cu on copper substrate was provided as an interlayer for Cu to Cu bonding under the air environment. Various examination was conducted and investigated on the effect of experimental parameters such as coating materials, coating time(or coating thickness), bonding temperature and bonding time etc. Bonding was performed at the temperature of $210^\circC-320^\circC$ for 0sec and interfacial reaction between the coated layer and copper substrate was examined using optical, scanning electron microscope and x-ray diffractometer. From the obtained results, it was found that intermetallic compounds layer consisted of $\eta-phase(Cu_6Sn_5)$ and $\beta-phase(Cu_3Sn)$ was formed at the joint interface for almost all coating materials. But the dominant phase formed in the preetched Cu substrate coated with Sn was $\beta-phase$. A characteristic morphology looks like a reaction ring, which was believed as the strong interconnecting regions between two substrates, was found to be formed on the reaction surface of copper substrates. The morphologies and compositions of the intermetallics, which depends on the regions of the reaction surface, was appeared as greatly different. Based on above results, the new bonding process to make the joint at lower temperature for short time can be admitted as a feasible process.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.168-175
• /
• 2006

An experimental study was conducted to investigate the effect of the morphology of CNT on the thermal conductivity of suspensions. The effective thermal conductivities of the samples were measured using asteady-state cut bar apparatus method. Enhancements based on the thermal conductivity of the base fluid are presented as functions of both the volume fraction and the temperature, Although functionalized SWNT produiced a more stable and homogeneous suspension, the addition of small amounts of surfactant to suspensions of 'as produced' SWNT demonstrated a greater increase in effective thermal conductivity than functionalized SWNT alone. The effective thermal conductivity enhancement corresponding to 1.0 percent by volume approached 10%, which was observed to be lower than expected, but more than twice the values, 3.5%, obtained for similar tests conducted using aluminum oxide suspensions. However, for suspensions of MWNT, the degree of enhancement was measured to be approximately 37%. It was postulated that the effect of clustering, resulting from the multiple heat-flow passages constituted by interconnecting neighboring CNT clusters, played an important role in significant enhancement of effective thermal conductivity.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.747-750
• /
• 2019

웨어러블 디바이스는 일상생활에서 실질적으로 필수적이며 사용자들에게 편리하게 이용되고 건강관리와 의학 분야 등에 활용되고 있다. 전력분야에서 전원 배터리의 사용시간의 한계를 극복하고 효율적인 충전방법에 관한 많은 연구가 진행되고 있다. 무선전력전송은 전선을 사용하지 않고 무선으로 전기장을 부하에 전력을 전달하는 기술이다. 이 전송기술은 저 전력의 스마트폰에서부터 고 전력을 사용하는 철도 충전시스템까지 응용분야가 다양하다. 충전방식은 유도방법과 자기공진방법의 2 종류로 나누는데 자기공진주파수는 13.45 Mhz를 사용하였다. 본 연구에서는 전송효율을 측정 비교하기 위하여 2 종류의 하드웨어를 구현한 후 비교하는데 있다.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.775-780
• /
• 2016

본 논문에서는 비선형 다물체 동역학 해석에 적용 가능한 구조해석을 개발하였다. 비선형 구조 해석을 위해 Co-rotational 이론 기반의 유한요소를 개발하였다. 그리고 국부 Lagrange 승수를 활용한 영역분할해석 기법을 적용하여 대용량/다물체 해석이 가능한 구조해석 알고리듬을 개발하였다. 기 개발한 구조 해석은 외팔보 및 다물체 구조에 대한 비선형 정적 해석 예제에 적용하였다. 병렬 계산에 따른 성능 평가는 희박행렬 계산 라이브러리인 PARDISO와 비교하였다. 이를 통해 기 개발 구조해석의 계산 속도 향상을 확인하였다.