• 전기화학회지
• /
• 제5권2호
• /
• pp.79-85
• /
• 2002

열역학적 관점에서 몬테 카를로 방법의 전기화학적 리튬 인터칼레이션에로의 응용에 대하여 다루었다. 우선 통계 열역학의 앙상블, Ising 및 lattice gas 모델의 기본 개념을 간단히 소개하였고, lattice gas 모델에 근거한 몬테카를로 방법을 사용하여 전이금속 산화물내로의 리튬 인터칼레이션의 열역학을 해석하였다. 특히 $LiMn_2O_4$전극에 대해 전극 포텐셜 곡선과 리튬 이온의 부분 몰 내부에너지와 엔트로피와 같은 열역학적 특성을 다루었고, 이로부터 리튬 인터칼레이션의 전기화학분야에서 몬테 카를로 방법의 유용성을 확인하였다

• 전기화학회지
• /
• 제5권2호
• /
• pp.86-92
• /
• 2002

속도론적 관점에서 키네틱 몬테 카를로 방법의 전기화학적 리튬 인터칼레이션에로의 응용에 대하여 다루었다. 우선 키네틱 몬테 카를로 방법과 전이상태이론의 기본 개념을 소개하였고, 확산거동을 평가하기 위한 시뮬레이션 과정을 설명하였다. 마지막으로 인터칼레이션 화합물중 $LiMn_2O_4$전극에 대해 전류 추이곡선과 선형 포텐셜 전류곡선을 해석하기 위해서 전이상태이론에 근거한 키네틱 몬테 카를로 방법을 셀-저항 제어조건하에서 사용하였다. 이로부터 키네틱 몬테 카를로 방법이 전기화학분야에서 리튬 인터칼레이션의 속도론적 연구에 매우 유용함을 알 수 있었다.

• 멤브레인
• /
• 제14권2호
• /
• pp.132-141
• /
• 2004

본 연구에서는 NBR과 여러 가지의 유기화물로 처리된 MMT type의 clay를 이용하여 NBR-Clay 하이브리드 막을 용융삽입법으로 제조하였다. Internal mixer를 사용하여 clay를 NBR에 분산시켰으며, 제조된 NBR-Clay 하이브리드에서 clay의 특성피크가 다소 감소하거나 이동하는 XRD 결과로부터 clay의 층간거리가 넓어지는 고분자의 clay층간삽입을 확인하였다. Clay의 종류에 따라서 제조된 NBR-Clay 하이브리드 막의 가스투과도, 기계적 물성 및 열적 성질을 측정하였다. NBR-Clay 하이브리드 막은 clay 자체의 도입과 층간거리의 확대로 기체분자의 tortuosity를 증가시켜서 가스투과도를 저하시키는 것을 확인하였다.

• 한국환경과학회지
• /
• 제13권4호
• /
• pp.429-434
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at 13$0^{\circ}C$ for 30min with various content of clay by melt-intercalation method under classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry(XRD), thermal gravimetric analysis(TGA), and rheometric dynamic analysis(RDA). It was found that intercalated or exfoliated state was obtained in the samples according to the condition of organic modification, clay content, and heating source.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.67-73
• /
• 1984

A stable intercalation complex was formed by adsorption of alcanol (ROH, R; $C_{10}H_2$, $C_{12}H_{25}$, $C_{14}H_{29}$) on the surfaces of Yongil bentonite in which the interlayer cation had been exchanged by n-decylammonium ion $(C_{10}H_{21}NH_3^+)$ The layer charge density calculated from the increaments of basal spacings was 0.34 per unit chemical formula. Thermochemical properties of synthesized $C_{10}H_{21}NH_3^+$ montmorillonite were studied by means of DSC, TGA, DTG, Thermal analysis showed two steps of desoption behavior of $C_{10}H_{21}NH_3^+$ ion namely nonyl $(CH_3(CH_2)_8$ decomposition reaction of 40$0^{\circ}C$ and methyleneammonium decomposition reaction of 78$0^{\circ}C$ The activation energy of nonyl decomposition reaction of $C_{10}H_{21}NH_3^+$ -montmorillonite respectively.

• Carbon letters
• /
• 제2권1호
• /
• pp.22-26
• /
• 2001

Na alloyed graphite intercalation compounds with stage 1 and 2 were synthesized using the high temperature and pressure technique. Thermal stability and staging transitions of the compounds were investigated depending on heating rates. The thermal stability and temperature dependence of the deintercalation compounds were characterized using differential scanning calorimeter (DSC) analyzer. Enthalpy of formations were confirmed at temperatures between 25 and $500^{\circ}C$, depending on the various heating rates. The structure ions and interlayer spaces of the graphite were identified by X-ray diffraction (XRD). Diffractograms of stages with non-integral (00l) values were obtained in the thermal decomposition process, and stacking disorder defects and random stage modes were observed. The average value of the interlayer C-C bond lengths were found approximately $2.12{\AA}$ and $1.23{\AA}$ from the diffractions. Based on the stage transition, the degree of the deintercalaton has a inverse-linear relationship against the heating rate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.227-227
• /
• 2010

The intercalation chemistry of graphite presents an attractive route to obtain few-layered graphene platelets based on the expanded interlayer spacing. We report that the lithium can be intercalated into the graphite in a controllable manner by adjusting the variables such as temperature, pressure, and reaction time. From the X-ray diffraction experiments, the lithium-graphite intercalaltion compounds (Li-GICs) can be produced as the first stage compounds ($LiC_6$), the second-stage compounds ($LiC_{12}$), and the mixtures, which is most likely to be dependent on the temperature and reaction time. Since these Li-GICs are expected to facilitate the exfoliation of graphite, we investigated the feasibility of Li-GICs as a effective precursors for the generation of single-or few-layered graphite nano-platelets.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.289-296
• /
• 2005

Biodegradable nanocomposites were prepared by mixing a polymer resin and layered silicates by the melt intercalation method. Internal structure of the nanocomposite was characterized by using the small angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Nanocomposites having exfoliated and intercalated structures were obtained by employing two different organically modified nanoclays. Rheological properties in shear and extensional flows and biodegradability of nanocomposites were measured. In shear flow, shear thinning behavior and increased storage modulus were observed as the clay loading increased. In extensional flow, strain hardening behavior was observed in well dispersed system. Nanocomposites with the exfoliated structure had better biodegradability than nanocomposites with the intercalated structure or pure polymer.

• 한국포장학회:학술대회논문집
• /
• 한국포장학회 2006년도 정기총회 및 추계학술발표대회
• /
• pp.54-73
• /
• 2006

Four different types of chitosan-based nanocomposite films were prepared using a solvent casting method by incorporating with four types of nanoparticles, i.e., an unmodified montmorillonite (Na-MMT), an organically modified montmorillonite (Cloisite 30B), a Nano-silver, and a Ag-zeolite (Ag-Ion). X-ray diffraction patterns of the nanocomposite films indicated that a certain degree of intercalation was formed in the nanocomposite films, with the highest intercalation in the Na-MMT-incorporated films followed by films with Cloisite 30B and Ag-Ion. SEM micrographs showed that in all the nanocomposite films, except the Nanosilver-incorporated one, nanoparticles were dispersed homogeneously throughout the chitosan polymer matrix. Consequently, mechanical and barrier properties of chitosan films were affected through intercalation of nanoparticles, i.e., tensile strength (TS) increased by 7-16%, while water vapor permeability (WVP) decreased by 25-30% depending on the nanoparticle material tested. In addition, chitosan-based nanocomposite films, especially silver-containing ones, showed a promising range of antimicrobial activity.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.122-126
• /
• 2004

Biofunctional nanohybrids are synthesized from layered double hydroxide (LDH) and the vitamins such as ascorbic acid and topopherol acid succinate. Either ion exchange or copricipitaion leads to successful intercalation of the vitamins into gallery space of LDH that offers a new route to safe preservation of bioactivity as well as controlled release. Intercalations of vitamins are clearly reflected on the increase in the basal spacing of ZnAl-(Nitrate) LDH from 8.5 ${\AA}$ to 10.5 ${AA}$ for ascorbate, and 49.0 ${AA}$ for tocopherol acid succinate, respectively. No significant change in UV-Vis and IR absorption characteristics of the intercalated vitamins strongly supports the safe maintenance of their bioactivities without any deterioration of chemical and structural integrity. Furthermore, it is shown that the hybridized vitamins could be discharged in a controlled kinetics.