• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.408-414
• /
• 1988

This thesis is 2nd thesis from "Mechanism of Intercalation Compounds in Graphite with Hydrogen sulfate(J. Korea Cer. Soc. Vol. 22. No.6, 1985). We have oxidized natural Graphite flakes(0.1~0.2mm., Kropfm hl passau in Deutchland. S40) with a solution of CrO3 in H2SO4. Whilst persulfate ions were intercalated, too, below 7$^{\circ}C$, no evidence for intercalation of a peroxo compound was found at 22$^{\circ}C$. The reaction was interrupted after various times by filtering and washing with concentrated H2SO4. X-ray diffraction showed that the 2nd stage compound had already been formed after 2 minutes. We could only follow further oxidation to the blue stage compound which was completed after 35 minutes. We have found six distinct intermediate stage between 2nd stage and 1 stage. Experiments are described on the formation of intermediate stage color and X-ray diffraction analysis.ysis.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.55-59
• /
• 2002

A 78-year-old woman was referred to Chonbuk National University Dental Hospital complaining of facial palsy and palpable mass on the right parotid gland area. Clinical examination showed non-specific findings of the intraoral region, but showed asymmetrical facial appearance. Panoramic view showed a large amorphous calcified mass on the posterior to the mandibular ramus and thin cortical plate of the posterior ramus. Sialogram showed constriction of the main duct and no further filling of striated, intercalated ducts and parenchymal areas. CT scans demonstrated an irregular, infiltrating mass with slight enhancement in the right parotid gland. The mass showed necrotic areas and calcifications. Bone scan showed marked accumulation of /sup 99m/Tc-MDP on the right posterior maxilla. Microscopic findings demonstrated the minimal morphologic alterations and rare mitotic figures within tumor cells, and diagnosed as adenocarcinoma (NOS, Grade II). This report could be aid in the diagnosis of calcified lesions of the salivary gland.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.137-142
• /
• 1997

We synthesized the intercalation compound between a layered double hydroxide and an ethyl orange. The orientation of the intercalated ethyl orange into the layered double hydroxide was investigated. The molecular plane of the ethyl orange and its N＝N axis lie nearly perpendicular to the hydroxide layers with an antiparallel pattern.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.425-430
• /
• 2003

Two types of poly(n-butyl acrylate) copolymer/silicate nanocomposites have been produced: poly(n-butyl acrylate-co-methyl methacrylate) [P(BA-co-MMA)]/silicate nanocomposites and poly(n-butyl acrylate-co-styrene) [P(BA-co-ST)]/silicate nanocomposites. The P(BA-co-MMA)/silicate nanocomposites shows the exfoliated structures but a P(BA-co-ST)/silicate nanocomposites have intercalated structures, because the BA/MMA comonomer has a higher polarity (e-value in Q-e scheme) than the BA/ST comonomer. The BA/MMA comonomer expanded the interlayer space of the silicate wider than did the BA/ST comonomer. The thermal degradation onset point of the P(BA-co-MMA)/silicate nanocomposites was 43$^{\circ}C$ higher than that of pure P(BA-co-MMA). P(BA-co-MMA)T5%, P(BA-co-MMA)T10%, and P(BA-co-MMA)T20% exhibit 134,302, and 195% increases, respectively, in their storage moduli at -20$^{\circ}C$ relative to the pure copolymer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.226-226
• /
• 2003

일반적으로, 고분자 매트릭스에 층상 점토광물이 분산되어 얻어지는 복합재료는 세가지 형태를 이룬다. 첫째 통상의 복합재료는 고분자 매트릭스 내에 점토입자가 고루게 분산된 상태를 말하며, 둘째 점토 층 사이에 고분자 모노머나 올리고머가 일부분 삽입된 삽입형 복합재료(intercalated composite)이며, 셋째 점토 층 사이에 삽입된 모노머나 올리고머의 경화 또는 중합반응을 통해 점토내의 한층 한층 균일하게 매트릭스 내에 분산된 박리형 나노복합소재(exfoliated nanocomposite) 이다. 이들 복합재료들 중 박리형 나노복합소재는 적은 양의 점토가 단위 층으로 고분자 매트릭스에 완전히 분산되어 다양한 물성의 향상이 기대되는 재료이다. 따라서 최근 고분자의 기계적 강도, 팽윤 저항성 그리고 차폐특성 둥 전반적인 물성을 향상시키는 방법으로 층상 점토광물의 층 사이에 다양한 유기물을 삽입하여 층간거리를 확장시킨 유기 점토광물을 제조하고 이를 고분자 소재에 첨가하여 박리형 나노복합소재를 제조하는 방법이 많은 연구가 수행되고 있다.

• Journal of Photoscience
• /
• v.1 no.1
• /
• pp.25-29
• /
• 1994

Diffuse reflectance and emission spectra of 7-hydroxyquinoline intercalated in the supercage of X and Y zeolites are compared with the absorption and emission spectra of aqueous 7-hydroxyquinoline solutions at various pH to understand protropic and photophysical properties of 7-hydroxyquinoline in zeolite microenvironments. Predominance of zwitterionic spedes with significant existences of the other three protropic equilibrium species, normal, protonated and deprotonated species in zeolite samples indicates that the major fraction of the molecules interact with strong acid and base sites of zeolite at an adsorbed position. Observed zeolite pHs of near neutrality are established by a near balance in numbers of many strong acid and base sites rather than by'small numbers or weakness of acid and base sites. Excitations of nonzwitterionic species such as deprotonated species also give prevailing zwitterionic fluorescence, indicating that excited and ground proton transfer cycles of protropic species can be triggered by photons in organized zeolite media as well as in water.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.111-122
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at $130^{\circ}C$ for 30min with various amount of MMT or OMMT used the melt-intercalation method applied the classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry (XRD), transmitted electron microscopy (TEM) differential scanning calorimetry (DSC), and rheometric dynamic analysis (RDA). It was found that intercalated or exfoliated state of the samples could be controlled by the clay type, clay content, and heating type.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.74-77
• /
• 1997

We have examined conduction properties and electrochemical properties of MCMB 6-28 and MPCF 3000. As results, electrical conductivity of carbon decreased with increasing the number of intercalated lithium ion. MCMB and MPCF showed reversible redox reaction, and the potentials of the oxidized and reduced peaks were 0.3V and 0V, respectively. First discharge capacity of MCMB was 190㎃f/g and that of MPCF was 220㎃h/g. MPCF has good properties for lithium secondary battery.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.102-106
• /
• 2005

Poly(methyl methacrylate) (PMMA)/sodium montmorillonite (Na-MMT) nanocomposites were prepared with a novel method utilizing a macroazoinitiator (MAI). To induce the intergallery polymerization of methyl methacrylate (MMA), the MAI containing a po1y(ethylene glycol) (PEG) segment was intercalated between the lamellae of Na-MMT and swelled with water to enhance the diffusion of MMA into the gallery. The structure of the nanocomposite was examined using X-ray diffraction and transmission electron microscopy, and the thermal properties were examined using differential scanning calorimetry and thermogravimetry. The PMMA/Na-MMT nanocomposite prepared by intergallery polymerization showed a distinct enhancement of its thermal properties; an approximately $30^{\circ}C$ increase in its glass transition temperature and an $80\sim100^{\circ}C$ increase in its thermal decomposition temperature for a $10\%$ weight loss.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.291-291
• /
• 2006

Two different sources of clay, Na-Bentonite (Thai local clay) and Na-Montmorillonite were modified with Hexadodeccyltrimethyl ammonium bromide. The nanocomposites of polypropylene were successfully prepared via melt blending in a co-rotating twin screw extruder by using PP-g-MA as a compatibilizer at various contents of organoclays. The morphology of nanocomposites was investigated by using XRD and SEM. The results showed that the intercalated and exfoliated structures were obtained. The thermal behavior was also studied by using DSC and TGA. The degradation temperature of filled PP was greater than that of unfilled PP by 20%. And, the tensile strength and modulus were improved when a small amount of organoclays were added.