• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.207-221
• /
• 2014

Education environment of modern society is rapidly changing along the usage of various device and development of contents. Learners of diverse age groups and genders are exposed in smart education environment. Thus in order to investigate effective smart education contents production, this study classified interactive types that affect learning satisfaction into CAI (Computer Assisted Instruction) based , NCS (Network Communication System) based , and NTS (New Technology System) based . Then we investigated how each interactive types affect immersion, utility, self-efficacy, practicality, and stimulation. The effects were measured according to the learner's gender and age. As the result, interactive types do affect smart education, where male had higher learning satisfaction for CAI based, game type, and wiki type while female had higher satisfaction for relationship establishment type and experience type. Also, for age group, the 10s preferred NTS based, 20~30s NCS based, and 40s and over CAI based interactive type. Thus, if satisfaction levels according to gender and age are considered when producing smart education contents, it may be possible to create educative contents that meet the dispositions of the learners.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2011

Interactive media are applied to inner and outer space of small public space to enhance for the interaction between the spectator and works, also widely used in the exterior wall by LED and projector for advertisement. In the other hand, case studies of interactive media for large space have not less accomplished than those of buildings and public spaces. Thus, these studies analyzed 11 large structure examples by display, content, interface, and technology device by comparison of those cases of ordinary building public space. First interactive media for large space are found to be contents(39%), and next one is play(27%), advertisement(17%) and message(17%).

• 한국기계연구소 소보
• /
• s.16
• /
• pp.75-81
• /
• 1986

본 논문에서는 기계부품 요소의 설계와 분석에 사용되는 대화식 Graphics package KIMMPAK 을 설계.구현하였다. 2차원의 Plotting 루틴과 Device driver로 구성된 KIMMPAK은 TEKTRONIX 그래픽 터미널을 Drive할 수 있는 PLOT10-TCS와, IBM-PC용의 Multi-HALO(MHA¬LO), 그리고 HP Plotter의 PLOT-21 그래픽 라이브러리를 이용하여 Device Driver를 구축하였다. 이로 인한 KIMMPAK의 Device 독립성의 증가는 패키지 자체의 호환성 및 신뢰성을 높이고 있다. KIMMPAK은 VAX/VMS V4 . 2 운영체제하에서 FORTRAN-77의 부프로그램 형태로 구현되어 있으며, IBM-PC에서 사용 가능하도록 MS-FORTRAN으로 변화된 PC용 KIMMPAK이 따로 설계.구현되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.161-162
• /
• 2012

본 논문에서는 주관적 3D quality of experience (QoE) 평가에 적합한 IACQE (Interactive Assistance Continuous Quality Evaluation) 방법을 제안한다. 이 방법은 크게 3D 평가 영상이 재생되는 디스플레이와 평가 도구사이의 device interaction, 평가 도구와 평가 참여자사이의 human interaction process로 구성된다. Device interaction process는 무선 네트워크 프로토콜 (WLAN and WiFi)을 통해 3D 디스플레를 동작시키는 서버와 평가 도구 사이의 정확한 동기화 및 평가결과 기록 등의 작업을 수행하며, human interaction process는 평가 도구로 사용하는 tablet-pc의 촉각, 시각, 청각적인 자극을 통해 기존의 주관적 3D QoE 평가에서 나타날 수 있는 문제점들을 최소화 한다.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.478-491
• /
• 2019

This work develops a monitoring system for the population with health concerns. A belt integrated with an on-body circuit and sensors measures a wearer's selected vital signals. The electrocardiogram sensors monitor heart conditions and an accelerometer assesses the level of physical activity. Sensed signals are transmitted to the circuit module through digital yarns and are forwarded to a mobile device via Bluetooth. An interactive application, installed on the mobile device, is used to process the received signals and provide users with real-time feedback about their status. Persuasive functions are designed and implemented in the interactive application to encourage users' physical activity. Two signal processing algorithms are developed to analyze the data regarding heart and activity. A user study is conducted to evaluate the performance and usability of the developed system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.70-76
• /
• 2012

In general, the unidirectional power flow is normal in distribution feeders before activation of distributed power source such as PV. However, the interactive power flow is likely to occur in case of the power system under distributed generation. This interactive power flow can cause an unexpected effect on convectional protection coordination systems designed based only on the unidirectional power flow system. When the power line system encounters a problem, the interactive power flow can be a contributed current source and this makes the fault current bigger or smaller compared to the unidirectional case. The effect of interactive power flow is varied depending on the location of the point to ground fault, relative location of the PV, and connection method. Therefore it is important to analyse characteristics of fault current and interactive flow for various transformer connection and location of the PV. This paper proposes a method of improved protection coordination which can be adopted in the protective device for customers in distribution feeders interconnected with the PV. The proposed method is simulated and analysed using PSCAD/EMTDC under various conditions.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.11a
• /
• pp.84-85
• /
• 2003

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.137-145
• /
• 2020

Providing safety training to construction workers is essential to reduce safety accidents at the construction site. With the prosperity of visualization technologies, Immersive Virtual Reality (IVR) has been adopted for construction safety training by providing interactive learning experiences in a virtual environment. Previous research efforts on IVR-based training have found that the level of fidelity of interaction between real and virtual worlds is one of the important factors contributing to the sense of presence that would affect training performance. Various interactive devices that link activities between real and virtual worlds have been applied in IVR-based training, ranging from existing computer input devices (e.g., keyboard, mouse, joystick, etc.) to specially designed devices such as high-end VR simulators. However, the need for high-fidelity interactive devices may hinder the applicability of IVR-based training as they would be more expensive than IVR headsets. In this regard, this study aims to understand the impact of the level of fidelity of interactive devices in the sense of presence in a virtual environment and the training performance during IVR-based forklift safety training. We conducted a comparative study by recruiting sixty participants, splitting them into two groups, and then providing different interactive devices such as a keyboard for a low fidelity group and a steering wheel and pedals for a high-fidelity group. The results showed that there was no significant difference between the two groups in terms of the sense of presence and task performance. These results indicate that the use of low-fidelity interactive devices would be acceptable for IVR-based safety training as safety training focuses on delivering safety knowledge, and thus would be different from skill transferring training that may need more realistic interaction between real and virtual worlds.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.932-938
• /
• 2016

Recently, interactive media which maximizes audience engagement by making the audience appeal on a stage in digital media environment has been distributed more widely. In fact, there has been active movement to develop and promote a new participatory media genre with higher immersion by applying this kind of interactive media concept to advertisement, film, game and e-learning. In the conventional interactive media, digital media had to be enjoyed in particular environment where diverse sensors were installed or through a certain device to recognize a user's motion and voice. This study attempted to design and implement an image creation system which ensures interactions between a user and media in popular distribution-enabled web environment and through PC and smart devices to minimize the image producer-user constraints.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.5 no.2
• /
• pp.105-107
• /
• 1987

A storage tube, Tektronix 4010, was added to NOVA 840 system at Korea Advanced Institute of Science in 1974 and efforts were made to develop an interactive graphics system. These include a software library, called TCS(Terminal Control System) [4], algorithms for hidden line and surface eliminations [5. 6], and two single user graphics systems based on different concepts involving graphic languages [2, 11]. A storage tube is a low-cost terminal, which is useful in certain applications, but introduces some problems since partial modification of the screen is not possible without erasing it entirely. Thus it has far reaching effects on the design of an interactive graphics system. The components of an interactive graphics system will be explained in section 2 and their relation ships with the choice of storage tube as the output device will be pointed out.