• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.31-36
• /
• 2023

Among imaging and treatment devices for small animals, positron emission tomography(PET) causes a change in spatial resolution within a field of view. This is a phenomenon caused by using a small gantry and a thin and long scintillation pixel, and detectors that measure the interaction depth are being developed and researched to solve this problem. In this study, a detector that measures the interaction depth was designed using several scintillator blocks and light guides with different reflector patterns. The scintillator block composed of 4 × 4 arrays of 3 mm × 3 mm × 5 mm scintillation pixels formed four layers, and a light guide was inserted in each layer to configure the entire detector. In order to check whether the interaction depth was measured, a gamma ray interaction was generated at the center of all scintillation pixels to acquire data and then reconstructed into a flood image. The reflector patterns of the light guides inserted between the layers were all different, so the positions of the scintillation pixels for each layer were formed in different locations. It is considered that even spatial resolution can be achieved over all regions of the field of view if all positions of the scintillation pixels thus formed are separated and used for image reconstruction.

• Smart Media Journal
• /
• v.12 no.1
• /
• pp.77-91
• /
• 2023

Interaction methods and technologies for mutual exploration based on user behavior are evolving variously. Especially, in recent years, with the development of a wide range of sensors, they have developed from contact to non-contact methods. However, developers' senseless definitions of the interaction methods have made the exploration process quite complicated, which rather creates the hassle of users needing to learn the interaction guide defined by the developers before experiencing the exhibition contents. In this context, in order to make visitors smoothly communicate with exhibition contents, a preliminary study on easy interaction for users of various ages is needed, and in particular, research on improving the usability of user interaction is also essential when developing non-contact exhibition contents. So, in this study, a method to reduce the confusion between developers and users was sought by researching non-contact interaction that could be universally interacted with in the field of exhibition contents and proposing behavior designs. First, based on the narrative structure of cultural resources, existing studies were reviewed and the points of interactions as cultural contents were derived. Then the most efficient search process was selected among non-contact behaviors based on hand gestures that allow users to naturally guess and learn interaction methods. Furthermore, on the basis of the meaning of non-linear narrative-based interaction and the analysis results of spatial behavior elements, affordance behavior with high learning effect and efficiency was derived. Through this research process, an action that helps users to understand non-contact interaction naturally in the process of exploring exhibition-type cultural contents and to utilize non-contact interaction in the process of immersion in exhibition contents is proposed as a final model.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.2
• /
• pp.42-53
• /
• 2014

Phase resonance in Francis type hydraulic turbine is studied. The phase resonance is a phenomenon that the pressure fluctuation in the penstock of hydraulic turbine installation can become very large when the pressure waves from each guide vane caused by the interaction with the runner vane reach the penstock with the same phase. Experimental and numerical studies have been carried out using a centrifugal fan. In the present study, comparisons between the pump mode and the turbine mode operations are made. The experimental and numerical results show that the rotational direction of the rotor does not affect characteristics of the pressure fluctuation but the propagation direction of the rotorstator interaction mode plays an important role. Flow rate fluctuations through the stator are examined numerically. It has been found that the blade passing flow rate fluctuation component can be evaluated by the difference of the fluctuating pressure at the inlet and the outlet of the stator. The amplitude of the blade passage component of the pressure fluctuation is greater at the stator inlet than the one at the stator outlet. The rotor-stator interaction mode component is almost identical at the inlet and the outlet of the stator. It was demonstrated that the pressure fluctuation in the volute and connecting pipe normalized by the flow rate fluctuation becomes the same for pump and turbine mode operations, and depends on the rotational direction on the interaction mode.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.933-937
• /
• 2009

The IPTV which was commercialized and is being serviced to customers at present has a complicated GUI (Graphical User Interface) to provide two-way services and a remote control containing more than 40 buttons unlike the conventional TV. Accordingly, the remote control becomes one of the causes that make the usability of the IPTV worsen. In this paper, we suggest a LED button guide system as a solution to improve a usability of the IPTV, and analyze the effects of the interface obtained from the user evaluation on the user action.

• Journal of Korean Library and Information Science Society
• /
• v.18
• /
• pp.91-138
• /
• 1991

The paper describes the application areas of the hypertext and the relevance of hypertext principles to the information retrieval system. As to the techniques of the hypertext information retrieval the various navigation method including a guided tour, a history list, a browser, a book-mark, etc. are discussed. The query system is considered as the other technique to be integrated into the hypertext system for the enhancement of the interactive function of the information retrieval. Based on the theoretical background, a conceptual model of hypertext information retrieval system was constructed using GUIDE which was developed by P.J. Brown of Kent University. 16 bibliographic records from LISA of 1991(June) were used for the illustration of the basic operation of the system. Though the study could not reach the implementation level due to the absolute constraints of the time and experimental environments, further efforts will continue to develop a prototype system of a hypertext information retrieval. A few conclusions can be derived from the study : (1) The integration of the hypertext into the information retrieval system can be justified by permitting the end-users to have much stronger and more flexible interaction with the system. (2) The more the degree of the sofistication of the existing information retrieval system is the more the possibility of the development of an effective and user-oriented information retrieval system will be greater by integrating guide as a front end system to the underlying software. (3) The deep knowledge about the functions of information retrieval which can be enhanced by the hypertext could be acquired by the information retrieval specialists.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1760-1768
• /
• 2022

When gamma-camera sensor modules, which are key components of radiation imagers, are derived from the coupling between scintillators and photosensors, the light collection efficiency is an important factor in determining the effectiveness with which the instrument can identify nuclides via their derived gamma-ray spectra. If the pixel area of the scintillator is larger than the pixel area of the photosensor, light loss and cross-talk between pixels of the photosensor can result in information loss, thereby degrading the precision of the energy estimate and the accuracy of the position-of-interaction determination derived from each active pixel in a coded-aperture based gamma camera. Here we present two methods to overcome the information loss associated with the loss of photons created by scintillation pixels that are coupled to an associated silicon photomultiplier pixel. Specifically, we detail the use of either: (1) light guides, or (2) scintillation pixel areas that match the area of the SiPM pixel. Compared with scintillator/SiPM couplings that have slightly mismatched intercept areas, the experimental results show that both methods substantially improve both the energy and spatial resolution by increasing light collection efficiency, but in terms of the image sensitivity and image quality, only slight improvements are accrued.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.161-169
• /
• 2017

The present study investigated the effect of the rib arrangement and a guide vane for enhancing internal cooling of the blade. Two types of rib arrangements were used in the first and second passage in parallel. Aspect ratio of the channel was 5 and a fixed Reynolds number based on hydraulic diameter was 10,000. The attack angle of rib was $60^{\circ}$, rib pitch-to-height ratio (p/e) was 10, and the rib height-to-hydraulic-diameter ratio ($e/D_h$) was 0.075. The effect of an interaction between Dean vortices and the secondary vortices from the first passage was observed. Overall, the attack angle of rib in the first passage was dominant factor to heat transfer and flow patterns in turning region. Also, the channel with a guide vane showed enhanced heat transfer at the tip surface with reducing flow separation and recirculation.

• Ocean Systems Engineering
• /
• v.3 no.4
• /
• pp.257-273
• /
• 2013

Top tensioned riser (TTR) is often used in a floating oil/gas production system deployed in deep water for oil/gas transport. This study focuses on the extension of the existing numerical code, known as CABLE3D, to allow for static and dynamic simulation of a TTR connected to a floating structure through a tensioner system or buoyancy can, and restrained by riser guides at different elevations. A tensioner system usually consists of three to six cylindrical tensioners. Although the stiffness of individual tensioner is assumed to be linear, the resultant stiffness of a tensioner system may be nonlinear. The vertical friction between a TTR and the hull at its riser guide is neglected assuming rollers are installed there. Near the water surface, a TTR is forced to move horizontally due to the motion of the upper deck of a floating structure as well as related riser guides. The extended CABLE3D is then integrated into a numerical code, known as COUPLE, for the simulation of the dynamic interaction among the hull of a floating structure, such as spar or TLP, its mooring system and riser system under the impact of wind, current and waves. To demonstrate the application of the extended CABLE3D and its integration with COUPLE, the numerical simulation is made for a truss spar under the impact of Hurricane "Ike". The mooring system of the spar consists of nine mooring lines and the riser system consists of six TTRs and two steel catenary risers (SCRs).

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.28-54
• /
• 2020

Even though a systematic sampling approach is very crucial in both the general and detailed investigation phases to produce the best conceptual site model for contaminated sites, the concept is not yet established in South Korea. The U.S. Environmental Protection Agency (EPA) issued the 'Strategic Sampling Approaches Technical guide' in 2018 to help environmental professionals choose which sampling approaches may be needed and most effective for given site conditions. The EPA guide broadly defines strategic sampling as the application of focused data collection across targeted areas of the conceptual site model (CSM) to provide the appropriate amount and type of information needed for decision-making. These strategic sampling approaches can prevent the essential data from missing, minimize the uncertainty of projects and secure the data which are necessary for the important site-decisions. Furthermore, these provide collaborative data sets through the life cycle phases of projects, which can generate more positive proofs on the site-decisions. The strategic sampling approaches can be divided by site conditions. This technical guide categorized it into eight conditions; High-resolution site characterization in unconsolidated environments, High-resolution site characterization in fractured sedimentary rock environments, Incremental sampling, Contaminant source definition, Passive groundwater sampling, Passive sampling for surface water and sediment, Groundwater to surface water interaction, and Vapor intrusion. This commentary paper introduces specific sampling methods based on site conditions when the strategic sampling approaches are applied.

• Journal of The Korean Association For Science Education
• /
• v.29 no.4
• /
• pp.373-387
• /
• 2009

The purpose of the study was to investigate the roles of parents in science learning at the Everyday Science Classroom (ESC). Discourses of 20 parent-child dyads were analyzed to identify the roles of the parents and their significance. Data were also gathered through questionnaires that were made to survey the perception of parents and students of the Everyday Science Classroom (ESC) in Gwanak-gu. The results showed that parents played the role of Guide as well as Learner. Parents as the Guide showed roles of Process guide, Cognitive facilitator, Participation inducer, and Authoritative manager. Parents helped their children to accomplish the experiment successfully (34.5%) and offered cognitive scaffolds (21.3%) and affective scaffolds (8.7%) for children to reach a level of understanding that they could not reach by themselves. However, parents who helped their own children without considering their needs repressed children's autonomous learning (1.6%). The roles of parents as the Learner were categorized into Active learner (16.1%), Collaborative fellow learner (15.1%), and Authoritative leading learner (2.7%). The multiple roles of parents can influence the children's understanding of science in both positive and negative ways. This study can provide basic information on the roles of parents and their interaction with their children. Reflection on positive aspects of parent participation in program development will promote the understanding of science in both parents and children.