• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.515-517
• /
• 2003

In this paper we examine the effects of the required portions of guard timing spaces in a MAC frame of ETSI BRAN HIPERLAN/2 system such as inter-mobile guard timing space in UL(Up Link) duration, inter-RCH(Random CHannel) guard timing space, sector switch guard timing space. In particular, we calculate the number of OFDM(Orthogonal Frequency Division Multiplexing) symbols required for these guard timing spaces in a MAC frame. We them evaluate the throughput of HIPERLAN/2 system as we vary parameter such as the guard time values defined in [2], the number of DLCCs(Data Link Control Connections), and the number of RCHs. Finally we show by numerical results that the portions for the 새심 summation of required guard timing spaces in a MAC frame are not negligible, and that they should be properly considered when trying to evaluate the performance of MAC protocol of HIPERLAN/2 system and also when determining the number of RCHs as well as the number of DLCCs in UL PDU trains at an AP/CC(Access Point/Central Controller).

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.253-256
• /
• 2001

This paper describes a high speed MAC(Media Access Control) function chip for IEEE 802.11 MAC layer protocol. The MAC chip has control registers and interrupt scheme for interface with CPU and deals with transmission/reception of data as a unit of frame. The developed MAC chip is composed of protocol control block, transmission block, and reception block which supports the BCF function in IEEE 802.11 specification. The test suite which is adopted in order to verify operation of the MAC chip includes various functions, such as RTS-CTS frame exchange procedure, correct IFS(Inter Frame Space)timing, access procedure, random backoff procedure, retransmission procedure, fragmented frame transmission/reception procedure, duplicate reception frame detection, NAV(Network Allocation Vector), reception error processing, broadcast frame transmission/reception procedure, beacon frame transmission/reception procedure, and transmission/reception FIEO operation. By using this technique, it is possible to reduce the load of CPU and firmware size in high speed wireless LAN system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1208-1220
• /
• 1996

In this paper, the performance of a Carrier Sense Multiple Access/Collision avoidance (CSMA/CA) protocol using stop-and-Wait automatic Repeat reQuest, which is adapted as a draft standard in IEEE 802.11, is analyzed using a mathematical method based on a renewal theory, and simulation checks are performed, which confirm the goodness of our anlysis. In order to anlayze of CSMA/CA, we model that network is composed of finite populationand channel is slotted. And, we consider the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol. As resuls of analysis, we have found that the throughput is degraded and packet delay is increased as the number of stations, Acknowledgement (ACK) length and Distributed coordination function Inter Frame Space (DIFS) length are increased.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.288-291
• /
• 2011

Video stabilization is an important image enhancement widely used in surveillance system in order to improve recognition performance. Most previous methods calculate inter-frame homography to estimate global motion. These methods are relatively slow and suffer from significant depth variations or multiple moving object. In this paper, we propose a fast and practical approach for video stabilization that selects the most reliable key frame as a reference frame to a current frame. We use optical flow to estimate global motion within an adaptively selected region of interest in static camera environment. Optimal global motion is found by probabilistic voting in the space of optical flow. Experiments show that our method can perform real-time video stabilization validated by stabilized images and remarkable reduction of mean color difference between stabilized frames.

• Steel and Composite Structures
• /
• v.19 no.2
• /
• pp.503-519
• /
• 2015

This paper presents an optimization process using Genetic Algorithm (GA) for minimum weight by selecting suitable standard sections from a specified list taken from American Institute of Steel Construction (AISC). The stress constraints obeying AISC-LRFD (American Institute of Steel Construction-Load and Resistance Factor Design), lateral displacement constraints being the top and inter-storey drift, mid-span deflection constraints for the beams and geometric constraints are considered for optimum design by using GA that mimics biological processes. Optimum designs for three different space frames taken from the literature are carried out first without considering concrete slab effects in finite element analyses for the constraints above and the results are compared with the ones available in literature. The same optimization procedures are then repeated for the case of space frames with composite (steel and concrete) beams. A program is coded in MATLAB for the optimization processes. Results obtained in the study showed that consideration of the contribution of the concrete on the behavior of the floor beams results with less steel weight and ends up with more economical designs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1031-1046
• /
• 2018

Vehicular ad hoc network (VANET) is a dedicated network to connect vehicles without any centralized administration or infrastructure. The wireless access in vehicular environments (WAVE) protocol leveraging IEEE 1609/802.11p is widely implemented for VANETs. However, in congested traffic situation, the performance of the WAVE system degrades significantly due to serious collision, especially for safety related broadcast services on the control channel (CCH) interval due to the inherent drawback of its collision avoidance mechanisms called carrier sense multiple access with collision avoidance (CSMA/CA). In this paper, we propose a method that can decrease the number of frame collisions in CCH with a few modifications to the IEEE 802.11p protocol. In the paper, vehicles still employ CSMA/CA to compete for the channel access opportunity. However, by taking advantage of periodicity of synchronization interval, a two-state switching scheme introducing two new inter frame space (IFS) is proposed to reduce the number of competing vehicles substantially and as a result, the collision probability is significantly decreased. The simulation results demonstrate the superiority of the proposed method in packet collision rate.

• Earthquakes and Structures
• /
• v.23 no.4
• /
• pp.339-352
• /
• 2022

Due to the large volume and generally as a public building, the damage of large-span space structures under various non-conventional loads will cause greater economic losses, casualties, and social impacts, etc. Therefore, it is particularly important to evaluate the seismic performance of large-span space structures. This paper taked a multipurpose sports center as an example and considered its synergistic deformation based on the method of equivalent damping ratio. Furthermore, The ABAQUS software was used to analyze the time-history and energy response of the multipurpose sports center under the action of rare earthquakes, and proposed a quantitative damage index to assess the overall damage of the structure. Finally, the research results indicated that the maximum inter-story drift ratio of the multipurpose sports center under the action of rare earthquakes was less than its limit value. The frame beams presented different degrees of damage, but the key members were basically in an elastic state. The bearing capacity did not reach the limit value, which satisfied the intended seismic performance target. This study taked an actual case as an example and proposed a relevant damage evaluation system, which provided some reference for the analysis of the seismic performance of large-span space structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.879-888
• /
• 2001

본 논문에서는 무선 LAN의 MAC 계층 프로토콜을 고속으로 처리하는 MAC 기능 칩을 개발하였다. 개발된 MAC 칩은 CPU와의 인터페이스를 위한 제어 레지스터들과 인터럽트 체계를 가지고 있으며, 프레임 단위로 송수신 데이터를 처리한다. 또한 PFDM 방식 물리계층 모뎀을 위한 직렬전송 인터페이스를 가지고 있다. 개발된 MAC 칩은 크게 프로토콜제어기능 블록, 송신기능 블록 및 수신기능 블록 등으로 구성되었으며, IEEE 802.11 규격에 제시된 대부분의 DCF 기능을 지원한다. 구현된 MAC 칩의 동작을 검증하기 위해 RTS-CTS 절차 기능, IFS(Inter Frame Space) 기능, 액세스 절차, 백오프 절차, 재전송 기능, 분할된(fragmented) 프레임 송수신 기능, 중복수신 프레임 검출 기능, 가상 캐리어 검출기능(NAV 기능), 수신에러 발생 경우 처리 기능, Broadcast 프레임 송수신 기능, Beacon 프레임 송수신 기능, 송수신 FIFO 동작 기능 등을 시뮬레이션을 통해 시험하였으며, 시험 결과 모두 정상적으로 동작함을 확인하였다. 본 논문을 통해 개발된 MAC 기능 칩을 이용할 경우 고속 무선 LAN 시스템의 CPU 부하(load)와 펌웨어의 크기를 크게 줄일 수 있을 것으로 기대된다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.307-311
• /
• 2006

Distributed Coordination Function (DCF) in IEEE 802.11 and Enhanced Distributed Channel Access (EDCA) in IEEE 802.11e are contention-based access mechanism in Wireless LAN. Both DCF and EDCA reduce collisions based on inter-frame space (IFS) and backoff mechanisms. However, collisions are unavoidable even with the two mechanisms. Especially, in the EDCA model, the collision can be classified into interclass and intraclass collision. To eliminate interclass collision in Wireless LAN, we propose an interclass collision protection (ICP) scheme by employing contention protection period (CPP) after backoff, Analysis is performed for one dimensional EDCA model and for the proposed ICP based EDCA model.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1267-1270
• /
• 2009

IEEE 802.15.4 프로토콜은 구현이 용이하여 다양한 응용 네트워크에서 사용되고 있다. 하지만 대용량 데이터 전송시 백오프(back-off), CCA(Clear Channel Assesment), IFS(Inter Frame Space), ACK 시간 등이 MAC 계층에서 오버헤드로 작용하여 네트워크 성능 저하의 요인이 된다. 본 논문에서는 IEEE 802.11e 프로토콜에서 사용되고 있는 블록(block) ACK 기법을 분석하고 이를 802.15.4 네트워크에 적용할 것을 제안하였다. 시뮬레이션을 통한 성능 분석을 실시하고 제안한 기법이 802.15.4에서도 네트워크 처리량을 크게 향상 시킬 수 있음을 확인하였다.