• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.65-68
• /
• 2007

DOCSIS 3.0 MAC protocol regulate CM and CMTS Channel transfer times through MAP message. Standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluationed the performance of protocol follow in MAP Inter-arrival Time on DOCSIS 3.0. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.514-526
• /
• 2013

With a long sensing period, the inter-frame spectrum sensing in IEEE 802.22 standard is vulnerable to the effect of the traffic of the primary user (PU). In this article, we address the two degrading factors that affect the inter-frame sensing performance with respect to the random arrival/leaving of the PU traffic. They are the noise-only samples under the random arrival traffic, and the PU-signal-contained samples under the random leaving traffic. We propose the model in which the intra-frame sensing cooperates with the inter-frame one, and the inter-frame sensing uses the time-of-arrival (ToA), and time-of-leave (ToL) detectors to reduce the two degrading factors in the inter-frame sensing time. These ToA and ToL detectors are used to search for the sample which contains either the ToA or ToL of the PU traffic, respectively, which allows the partial cancelation of the unnecessary samples. At the final stage, the remaining samples are input into a primary user detector, which is based on the energy detection scheme, to determine the status of PU traffic in the inter-frame sensing time. The analysis and the simulation results show that the proposed scheme enhances the spectrum-sensing performance compared to the conventional counter-part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1069-1076
• /
• 2007

DOCSIS 3.0 protocol are proposed to support high-speed cable network DOCSIS 3.0 MAC protocol regulates CM and CMTS channel transfer times through MAP message. So MAP Inter-arrival time is primary factor of network performance. However, standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluated the performance of DOCSIS 3.0 protocol follow in MAP Inter-arrival Time. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.174-181
• /
• 2002

In this Paper, we proposed the method for the TIT (Theoretical Inter-arrival Time) was suggested in which it saves the cells by using the data buffer in the system rather than by using one separately from the internal controller, and it also releases these cells saved. The method of TIT complements the defect of the accumulation of the delay in the method of RDT which considers the time of the cell that is discharged from the established cell interval controller. And, in order to apply the merit of RDT, the method of TIT sets its standards on the cells arrival time as it was in the method of RAT.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.149-152
• /
• 2002

In this paper, an adaptive interference canceller (AIC) Is applied to the space-time coded DS-CDMA system in fading channels with arrival time difference from multiple transmit antennas In a CDMA system, arrival time difference causes not only inter-antenna and Inter-symbol interference but also multiple-access Interference even in a downlink. To mitigate the effect of the Interferences an AIC and ML decoding joint scheme Is proposed fur a space-time coded DS-CDMA system in which an adaptation process of tile AIC is merged in the Viterbi decoding algorithm. The performance of the proposed receiver is evaluated for the system with two transmit antennas. It is shown that the proposed receiver achieves significant performance improvement over the ML decoding receiver without the AIC

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.291-301
• /
• 2009

In this paper, the effect of ISI(Inter-Symbol Interference) and ICI(Inter-Carrier Interference) due to time difference of arrival on OFDMA-based mobile multi-hop relay (MMR) systems is analyzed. Analyses are performed for the ISI caused by the previous OFDMA symbol transmitted from neighboring macro or relay cell as well as the ISI caused by the next OFDMA symbol transmitted from neighboring macro or relay cell. Then, an effective SINR(Signal to Interference plus Noise Ratio) estimation method and a path selection method considering time difference of arrival are proposed to minimize the effect of ISI and ICI. It is shown by simulation that the performance degradation caused by time difference of arrival can be significantly mitigated when the proposed path selection method is applied to the uplink of OFDMA-based MMR systems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.277-285
• /
• 1997

In this paper, the definition to flexibility is examined through the literature and re-classified to set up an evaluation model. Flexibility is classified into three categories to find the flexibility types for evaluation. The flexibility type called as manufacturing flexibility is defined and a model is developed to make the performance evaluation possible, The manufacturing flexibility has a heavy relationship to the machine flexibility; and 5 flexibility types out of 8 have relationship to the machine flexibility. This indicates that it is possible to have a pretty good evaluation measure if the machine flexibility related types could be evaluated using a model. There are four different inter-arrival times in the model. A big time saving is observed if the processing time is set equal to 72 second. This indicates that a flexibility affects the system a lot if the inter-arrival time is close to the processing time. The model used in this paper includes multi-processes in a production line with machine failure. However, development of realistic models with buffer between processes and some of the flexibility types not included in this model are remained for further research.

• Journal of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.735-749
• /
• 2014

This paper studies the asymptotic behavior of the finite-time ruin probability in a jump-diffusion risk model with constant force of interest, upper tail asymptotically independent claims and a general counting arrival process. Particularly, if the claim inter-arrival times follow a certain dependence structure, the obtained result also covers the case of the infinite-time ruin probability.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.77-79
• /
• 2018

최근 기초 과학 분야뿐만 아니라 빅데이터 분석, 인공 지능과 같은 컴퓨터 과학 분야에서도 대용량의 컴퓨팅 자원을 많이 활용함에 따라 슈퍼컴퓨터와 같은 고성능 컴퓨팅 자원에 대한 요구가 더욱 증가하고 있다. 이러한 대규모 컴퓨팅 자원을 안정적으로 운영하기 위해서는 실패 작업의 특성에 대한 상세한 분석이 필수적이다. 본 논문에서는 한국과학기술정보연구원에서 운영하고 있는 슈퍼컴퓨터(Tachyon)에서 1년 동안 수집된 작업 데이터를 기반으로 고성컴퓨팅 시스템을 활용하는 작업의 특성을 파악하기 위해 다음 3가지의 분석 결과를 제시한다. 첫째는 실패한 작업의 비율, 평균 사용한 procssor수, 전체 작업 시간 중 실패 작업이 차지한 비율과 같이 간단한 통계적 분석 결과를 제시한다. 둘째는 실패한 작업의 inter-arrival time 분포 모형을 제시한다. 마지막으로 시간에 따른 실패 작업 확률을 분석하기 위해 inter-arrival time 값을 이용하여 hazard rate 결과를 제시한다.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.803-816
• /
• 1996

It is possible to prevent deadlock if the priority which is conventionally given to transactions is endowed to data items and the transactions with the highest priority among transactions accessing the data item is allowed to proceed. Based on this observation, we proposed a Data-Priority Based Locking Protocol(DPLP) and evaluated its performance against known locking protocols in Real Time Database Management System(RTDBMS). Transaction inter-arrival time(IAT) was varied to determine success ratio, average-lateness, confict ratio and restart ratio, In these simulations we verified that the proposed DPLP performs better than the other protocols.