• 전기학회논문지
• /
• 제58권12호
• /
• pp.2538-2541
• /
• 2009

H.264/AVC High 4:4:4 Intra/Predictive profiles supports RGB 4:4:4 sequences for high fidelity video. RGB color planes rather than YCbCr color planes are preferred by high-fidelity video applications such as digital cinema, medical imaging, and UHDTV. Several RGB coding tools have therefore been developed to improve the coding efficiency of RGB video. In this paper, we propose a new method to extract more accurate correlation parameters for inter-plane prediction. We use a searching method to determine the matched macroblock (MB) that has a similar inter-color relation to the current MB. Using this block, we can infer more accurate correlation parameters to predict chroma MB from luma MB. Our proposed inter-plane prediction mode shows an average bits saving of 15.6% and a PSNR increase of 0.99 dB compared with H.264 high4:4:4 intra-profile RGB coding. Furthermore, extensive performance evaluation revealed that our proposed algorithm has better coding efficiency than existing algorithms..

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.345-348
• /
• 2004

Every bridge node participating in multiple piconets and forming a scatternet should schedule the inter-piconet traffics in an efficient manner. Frequent piconet switching due to short polling intervals for the links of a bridge node leads to considerable time slots loss caused by the guard time and power consumption for transceiving and processing. On the other hand, restrained piconet switching may result in failures of fulfilling QoS (Quality of Service) requirements for some links. Tn this paper, we present a QoS aware inter-piconet scheduling scheme minimizing the piconet switching events within guaranteed QoS requirements. According to simulation results, the proposed scheme is confirmed to have great improvement in throughput and number of switching events over the credit scheme as current inter-piconet scheduling scheme for the scatter mode.

• 한국통신학회논문지
• /
• 제23권5호
• /
• pp.1282-1290
• /
• 1998

In this paper, the physical layer design of IMT-2000 system being developed by SK Telecom is introuduced. The outband signaling scheme and the two-pilot scheme are adopted for multimedia service and inter-cell asynchronous mode respectively. In addition, the synchronous transmission scheme is proposed to reduce the interference in the reverse link. The algorithm and simulation results of 'two-pilot scheme' for inter-cell asynchronous mode and 'reverse synchronous control' for synchronous transmission are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2464-2479
• /
• 2014

Multi-view video coding is an international encoding standard that attains good performance by fully utilizing temporal and inter-view correlations. However, it suffers from high computational complexity. This paper presents a fast encoder design to reduce the level of complexity. First, when the temporal correlation of a group of pictures is sufficiently strong, macroblock-based inter-view prediction is not employed for the non-anchor pictures of B-views. Second, when the disparity between two adjacent views is above some threshold, frame-based inter-view prediction is disabled. Third, inter-view prediction is not performed on boundary macroblocks in the auxiliary views, because the references for these blocks may not exist in neighboring views. Fourth, finer partitions of inter-view prediction are cancelled for macroblocks in static image areas. Finally, when estimating the disparity of a macroblock, the search range is adjusted according to the mode size distribution of the neighboring view. Compared with reference software, these techniques produce an average time reduction of 83.65%, while the bit-rate increase and peak signal-to-noise ratio loss are less than 0.54% and 0.05dB, respectively.

• Journal of Information Display
• /
• 제3권2호
• /
• pp.1-5
• /
• 2002

A CMOS driving circuit for active matrix type polymer electroluminescent displays was designed to develop an on-chip microdisplay on the single crystal silicon wafer substrate. The driving circuit is a conventional structure that is composed of the row, column and pixel driving parts. 256 gray scales were implemented using pulse amplitude modulation method. The 2-transistor driving scheme was adopted for the pixel driving part. The layout was carried out considering the compatibility with the standard CMOS process. Judging from the layout of the driving circuit, it turns that it is possible to implement a high-resolution display about 400 ppi resolution. Through the HSPICE simulation, it was verified that this circuit is capable of driving a VGA signal mode display and implementing 256 gray levels.

• 수산해양기술연구
• /
• 제34권4호
• /
• pp.450-456
• /
• 1998

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.6-8
• /
• 2009

In this paper. we propose receiver algorithms for VHF(Very High Frequency) digital link mode-2(VDL Mode-2) systems. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in VDL Mode-2 systems. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering the amount of inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link. In this paper, we design the optimum receive filter and packet detection algorithm and evaluate the performance of receiver adopting the proposed receive filter and packet detection algorithm.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.62-71
• /
• 1996

In this paper, we design tripel-mode channel filter using iris optimization technique and investigate its response. The cavity diameter is determined to resonate three orthogonal modes coincidently and inter-cavity iris is optimized in which one slot control one TE-TE mode and other TM-TM mode couplings simultaneously. Since the electric/magnectic field is variable due to slot position, the center position of the slot which handle coupling coefficients of two modes should be designe dwith optimizatin technique presented here. The implemented triple-mode filter in this paper saves its mass and volume upto 33% relating to the dual-mode filter, caused by the reduced number of cavities.

• 정보처리학회논문지C
• /
• 제10C권2호
• /
• pp.185-190
• /
• 2003

블루투스 통신은 한 개의 마스터와 최대 7개의 슬레이브로 구성된 피코넷을 기본 단위로 이루어지며, 다수의 피코넷은 브리지 노드라 불리는 공유 노드를 통해 상호 연결되어 스캐터넷을 형성한다. 브릿지 노드는 스위칭을 통해 피코넷간 통신을 수행하며, 이때 스위칭은 슬롯의 낭비, 즉 패킷 지연 시간을 최소화 할 수 있도록 주의 깊게 스케줄링 되어야 한다. 본 논문에서는 스니프 모드에 기반 한 효율적인 인터 피코넷 스케줄링 기법을 제안한다 스케줄링 기법은 브릿지 노드가 슬레이브로 동작하는 각 피코넷에 대해 스니프 모드를 통해 할당된 통신 시간 중 낭비되는 슬롯을 자신이 마스터로 동작하는 피코넷 통신에 할당함으로써 슬롯의 낭비를 줄인다. 각 피코넷에 할당되는 통신 시간은 트래픽의 양에 따라 적응적으로 결정된다. 실험 결과에 의하면 통신 시간을 균등하게 할당하는 라운드-로빈 기법에 비해 좋은 결과를 보인다.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.439-447
• /
• 2020

This paper presents two sets of full three-dimensional thermoelastic finite element analyses of superimposed thermo-mechanically loaded Spar Wingskin Joints made with laminated Graphite Fiber Reinforced Plastic composites. The study emphasizes the influence of residual thermal stresses and material anisotropy on the inter-laminar delamination behavior of the joint structure. The delamination has been pre-embedded at the most likely location, i.e., in resin layer between the top and next ply of the fiber reinforced plastic laminated wingskin and near the spar overlap end. Multi-Point Constraint finite elements have been made use of at the vicinity of the delamination fronts. This helps in simulating the growth of the embedded delamination at both ends. The inter-laminar thermoelastic peel and shear stresses responsible for causing delamination damage due to a combined thermal and a static loading have been evaluated. Strain energy release rate components corresponding to the Mode I (opening), Mode II (sliding) and Mode III (tearing) of delamination are determined using the principle of Virtual Crack Closure Technique. These are seen to be different and non-self-similar at the two fronts of the embedded delamination. Residual stresses developed due to the thermoelastic anisotropy of the laminae are found to strongly influence the delamination onset and propagation characteristics, which have been reflected by the asymmetries in the nature of energy release rate plots and their significant variation along the delamination front.