• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.597-605
• /
• 2017

Our work aims to analyze using the finite element method the evolution of the stress intensity factor (SIF) parameter K of three laminated folded plates stacks [$+{\alpha}$, $-{\alpha}$], made of the same epoxy matrix and different reinforcement fibers (boron, graphite and glass). Our results show that the angle of orientation of the boron/epoxy composite has no great influence on the variation of the parameter KI. Compared to composite graphite/epoxy and glass/epoxy, the laminated composite boron/epoxy reduces more the SIF KI in the middle of the plate for angles $0^{\circ}{\leq}{\alpha}{\leq}30^{\circ}$.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.631-653
• /
• 2005

In this work, the mechanism of damping and its theoretical evaluation for layered aluminium cantilever structures jointed with a number of equispaced connecting bolts under an equal tightening torque have been considered. Extensive experiments have been conducted on a number of specimens for comparison with numerical results. Intensity of interface pressure, its distribution pattern, dynamic slip ratio and kinematic coefficient of friction at the interfaces, relative spacing of the connecting bolts, frequency and amplitude of excitation are found to play a major role on the damping capacity of such structures. It is established that the damping capacity of structures jointed with connecting bolts can be improved largely with an increase in number of layers maintaining uniform intensity of pressure distribution at the interfaces. Thus the above principle can be utilized in practice for construction of aircraft and aerospace structures effectively in order to improve their damping capacity which is one of the prime considerations for their design.

• Archives of Pharmacal Research
• /
• 제14권2호
• /
• pp.172-175
• /
• 1991

Abnormality in the central noradrenergic system may be related to the seizure prone state in the genetically epilepsy prone rats (GEPR). The present work deals with the characterization of the deficit in noradrenergic system if susceptitibility and intensity of seizure are dependent on central noradrenregic activities by comparing the activities of dopamine $\beta$-hydroxylase (DBH) which hydroxylates dopamine into noradrenaline. DBH activities were measured in 5 areas of brain of normal rats, native GEPR and severe GEPR. The results suggest that lower DBH activities in the midbrain of GEPRs may positively be coupled to the susceptibility to seizure, whereas the same characteristics of the native or severe GEPR are not neccessarily in parallel with the intensity of seizure.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.789-793
• /
• 2003

This study focused on the optimization of the illumination method for efficient use of light energies in a photobioreactor. In order to investigate the effect of radiator position, a model simulation study was carried out using Synechococcus sp. PCC 6301 and an internally radiating photobioreactor as a model system. The efficiency of light transfer in a photobioreactor was analyzed by estimating the average light intensity in a photobioreactor. The simulation result, indicate that there exists an optimal position of internal radiators, and that the optimal position varies with radiator number and cell concentration. When light radiators are placed at the optimal position, the average light intensity is about 30% higher than that obtained by placing radiators at the circumstance or center of a photobioreactor. The method presented in this work may be useful for improving light transfer efficiency in a photobioreactor.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.82-85
• /
• 2009

Distributed Bragg reflector (DBR) porous silicon (PSi) was generated by an electrochemical etching a bragg structure into a silicon wafer through electrode current in aqueous ethanolic HF solution. DBR PSi exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer using square current waveform. The multilayered photonic crystals of DBR PSi exhibited the reflection of a specific wavelength with high reflectivity in the optical reflectivity spectrum. In this work, we have developed a method to create refractive index in Si substrate through intensity of an electric current. The electrochemical process allows for precise control of the structural properties of DBR PSi such as thickness of the porous layer, porosity, and average pore diameter. The number of reflection peak of DBR PSi and its pore size increased as the intensity of electric current increased. This might be a demonstration for the fabrication of specific reflectors or filters.

• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1173-1182
• /
• 2016

The objective of this work was to evaluate the ductile cracked structures with bonded composite patch used in probabilistic elastic plastic fracture mechanics subjected to tensile load. The finite element method is used to analyze the stress intensity factors for elastic case, the effect of cracks and the thickness of the patch ($e_r$) are presented for calculating the stress intensity factors. For elastic-plastic the Monte Carlo method is used to predict the distribution function of the mechanical response. According to the obtained results, we note that the stress variations are important factors influencing on the distribution function of (J/Je).

• 천문학논총
• /
• 제30권2호
• /
• pp.235-236
• /
• 2015

Microlensing can be seen as a version of strong gravitation lensing where the separation angle of the image formed by light deflection by a massive object is too small to be seen by a ground based optical telescope. As a result, what can be observed is the change in light intensity as function of time; the light curve. Conventionally, the intensity of the source is expressed in magnitudes, which uses a logarithmic function of the apparent flux, known as the Pogson formulae. In this work, we compare the magnitudes from the Pogson formulae with magnitudes from the Asinh formulae (Lupton et al. 1999). We found for small fluxes, Asinh magnitudes give smaller deviations, about 0.01 magnitudes smalller than Pogson magnitudes. This result is expected to give significant improvement in detection level of microlensing light curves.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제48권1호
• /
• pp.19-24
• /
• 2024

For over five millennia, humans have benefited from the valuable byproducts of Bombyx mori silkworms nourished on mulberry leaves and a multitude of potential applications remains available due to the diverse array of silkworm varieties. In this work, we discuss the utilization of Daehwangjam (DHJ), golden silk (GS), and Juhwangjam (JHJ), distinctive colored silks found in Korea, as chemosensors. These novel silks emit fluorescence under external stimuli and show a diminishing fluorescence intensity when exposed to HCl vapor. The considerable surface-to-volume ratio of these cocoons allows for the identification of 5 ppm, 300 ppm, and 3000 ppm HCl vapors through decreased fluorescence intensity. The results show the suitability of natural DHJ, GS, and JHJ for applications in biosensing applications.

• 산업경영시스템학회지
• /
• 제25권6호
• /
• pp.42-47
• /
• 2002

This paper examines the effects on mental task of changes in the intensity of physical activity. A treadmill-equipped instrument and perception tester were used to attain several levels of physical activity. In this paper, in order to determine the individual levels of physical activity of subjects, Borg-RPE scale, heart rate(HR) and respiratory quotient(RQ) were used. Also, an arithmetic addition test in whole-body activity on treadmill-equipped instrument as an indicator of mental task were performed. In the above experiments, the scores obtained in arithmetic addition test administered before and after physical activity at each intensity level used. Restricted within the limits of this paper, the results of these tests showed that the performance of mental task was Increased after physical activity.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.39-49
• /
• 1998

In this work, fatigue tests by axial loading were carried out to investigate the effect of stress ratio on the growth behaviors of surface fatigue crack for SM45C steel and Al 2024-T4 alloy. The growth behaviors of surface crack have been monitored during fatigue process by measuring system attached CCTV and monitor. When the growth rates of surface crack were investigate by the concept of LEFM based on Newman-Raju's .DELTA.K, the dependence of stress ratio appears both SM45C steel and Al 2024-T4 alloy. Therefore, modified stress intensity factor range, .DELTA.K' [=(1+R)/sup n/.DELTA.K] are intorduced to eliminate the dependence of stress ratio. Using .DELTA.K', it is found that the dependence of stress ratio disappears both SM45C steel and Al 2024-T4 alloy.