• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.317.2-317
• /
• 2002

Transmission loss of KHST passenger vehicle was calculated using measured acoustic data: In order to verify the transmission loss results for KHST case, similar experiment was carried out in laboratory condition, which result was compared those by geometric acoustic method. The computational results shows good agreement with the transmission loss magnitude from experiments. This paper also mentions items to obtain more accurate transmission loss values, i. e. how to assure reverberant field condition, the selection of source speaker' location.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.521-526
• /
• 2003

In this study the traffic noises were investigated for the subjective allowing limitation ion and the testified classes, 7 point scale was selected to evaluate the annoyance level with vocabularies. As a result, 'relatively annoying' is the most suitable expression for the allowing 1imitation, and the sound pressure levels for the traffic was 44.4㏈.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.279-309
• /
• 2009

Greenhouse gas emissions should be precisely forecast to reduce the emissions from industrial production processes. This study calculated the direct and indirect $CO_2$ emission intensities of 401 industries using the Input-Output tables 2003 and statistical data on the amount of energy use. This study had some limitations in drawing study findings because overseas data were used given the lack of domestic data. Other limiting factors included the oil distribution problems in the oil refinery sector, re-review of carbon neutral, and insufficient consideration of waste treatment. Nonetheless, this study is very meaningful since the direct and indirect $CO_2$ emission intensities of 401 industries were calculated. Specifically, this study considered from the zero-waste perspective the effects of waste, which attract interest worldwide since coke gas and gas from the steel industry are obtained as byproducts for the first time in Korea. According to the results of the analysis of $CO_2$ emission intensity per industry, typical industries whose indirect $CO_2$ emission intensity is high include crude steel making, Remicon, steel wire rods & track rail, cast iron, and iron reinforcing rods & bar steel. These industries produce products using the raw materials produced in the industrial sector whose $CO_2$ emission intensity is high. The representative industries whose direct $CO_2$ emission intensity is high include cement, pig iron, lime & plaster products, andcoal-based compounds. These industries extract raw ore from nature and refine them into raw materials that are useful in other industries. The findings in this study can be effectively used for the following case: estimation of target $CO_2$ emission reduction level reflecting each industrial sector's characteristics, calculation of potential emission reduction of each policy to reduce $CO_2$ emissions, identification of a firm's $CO_2$ emission level, and setting of the target level of emission reduction. Moreover, the findings in this study can be utilized widely in fields such as System of integrated Environmental and Economic Accounting(SEEA) and Material Flow Analysis(MFA) as the current topic of research in Korea.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.572-577
• /
• 2010

The purpose of this study was to find out the Bcl-2 (B-cell leukemia/lymphoma-2), Bax, and caspase-3(cysteine-aspartic proteases-3) protein expression in soleus and EDL muscle according to treadmill exercise intensity in 60 week-old SD rats. The SD rats were randomly divided into four groups (n=10 in each group): control (CON), low intensity exercise (LE), moderate intensity exercise (ME), and high intensity exercise (HE). The exercise was given to the rats for 8 wk, 5 day/wk. The animals underwent treadmill exercise at intensities of 30 min at 8 m/min for the LE group, 15 min at 16 m/min for the ME group, and 9 min at 24 m/min for the HE group. The results were as follows: the expression of Bcl-2 protein was lowest in the HE group and the expression of Bax protein was highest in the HE group. The expression of caspase-3 (cleaved form) protein was observed in the HE group. For the different types of muscle fiber, Bcl-2 protein expression in the soleus muscle was decreased in all groups. Bax protein expression in the soleus muscle was increased in the HE group only. Bcl-2 protein expression in the EDL muscle was decreased in the HE group, and Bax protein expression in the EDL muscle was increased in the ME and HE groups. Consequently, the protein expression related to the aged rats shows a difference according to the intensity of exercise. In addition, caspase-3 protein expression appeared in the HE group; however, in all amounts of intensity, DNA fragmentation was not observed. Therefore, apoptosis on skeletal muscles of aged mice can be intervened with optimal exercise. On the other hand, high intensity exercise can potentially accelerate the apoptosis of muscle fiber in aged rats.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.644-664
• /
• 2021

Objective : Since the enactment of the Special Act on Korean Medical Residents, neurosurgeons working at training hospitals have been performing the duties of residents, in addition to their existing patient care responsibilities, which include surgery, education, and research. This study explores the relationships between work intensity, work-life balance, and burnout experienced by Korean neurosurgeons. Methods : The participants (n=451) were neurosurgeons working at training hospitals throughout Republic of Korea. Data on socio-demographic characteristics (including objective and subjective work environment), work intensity, work-life balance, and burnout were gathered using self-report questionnaires completed between March 1 and December 20, 2019. The data were analyzed using descriptive statistics, independent samples t-tests, one-way analysis of variance, Pearson's correlations, and multiple regression analysis. IBM SPSS Statistics for Windows, version 25 (IBM Corp., Armonk, NY, USA) was used for the analyses. Results : The work intensity, work-life balance, and burnout levels of neurosurgeons were 3.95, 3.57 (on a scale from 1 to 5) and 4.60 (on a scale from 1 to 7); and 280 (62.1%) of 451 neurosurgeons were found to be experiencing burnout. By controlling for the socio-demographic characteristics, the effects of work intensity and work-life balance on burnout were analyzed. Work intensity (B=0.314), work-life balance-family and leisure (B=0.216), work-life balance-growth (B=0.147), job stress (B=0.133), and satisfaction with human relationships (B=-0.069) were shown to be significant (all p<0.05), and they were found to affect burnout in the abovementioned order. The overall explanatory power was 58.3% (p<0.05), and the explanatory power with the addition of independent variables such as work intensity and work-life balance was 14.5% (p<0.05). Conclusion : This study showed that Korean neurosurgeons working at training hospitals experienced a high level of work intensity and job stress, and low work-life balance. Additionally, nearly half of the neurosurgeons were found to experience burnout related to factors such as work intensity, work-life balance, job stress, and satisfaction with human relationships. In particular, these factors seem to have deteriorated further after the implementation of the Special Act on Korean Medical Residents. These very high levels of burnout among Korean neurosurgeons who care for patients with both brain and spinal diseases may have a very important impact on patients' health. Therefore, it is recommended that the Korean Neurosurgical Society and the Korean government make efforts to improve the factors that affect burnout among Korean neurosurgeons.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.159-166
• /
• 2008

This research was carried out to test and analyze capacity of the long distance sprayer fan in large livestock farmhouses. Long distance sprayer was manufactured to be able to spray a lot of water, which was a solvent for agricultural chemicals and black dye with the maximum spraying distance of 140 m and the effective spraying distance of 100 m. The spraying quantity and the distance were measured the intensity values of images within A4 papers, which absorbed the agricultural chemicals by spraying by binary image processing. These A4 papers were fixed upon the height of 1 m from soil ground at regular 10 m interval. After the A4 papers were collected and analyzed the intensity values of gray level. Gray level was ranged from 0 to 255, where 0 was black and 255 was white. A4 paper was fallen down from the stick at 10 m distance, because there were too large amount of sprayed water with black dye. Also, the paper showed low gray level at distance 30 m because of dropping lots of black water. The intensity value of gray level was showed almost less than 200 on the A4 papers between the distance 20 m and 100 m, which meant equality of spraying quantity. Additionally, it was possible to spay agricultural chemicals of until 180 m. Throughout this research, long distance sprayer could apply for preventing hoof-and-mouth disease in large livestock farmhouses.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.536-543
• /
• 2011

The previous researches on railway sector have focused on the total greenhouse gas(GHG) emission through national approaches. The aim of this study was to calculate GHG emission at a local government level to measure each city's GHG intensity on rail transportation. This study followed 'the guidelines for local government greenhouse gas inventory(issued by Korea Environment Corporation)' including VKT(Vehicle kilometers Travelled) methodology for railway inventory at a metropolitan area. As a result, the gyeongsangbuk-do emitted the highest GHG emissions at a local government level, followed by chungcheongnam-do and chungcheongbuk-do in 2006. Among several cities, Gimcheon-city emitted the highest GHG at basic government level in 2006. In future, the calculation of GHG emissions at local government level can be applied to establish various policies for GHG reduction.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1822-1829
• /
• 2015

In this study, artificial neural networks were used to determine the intensity of brightness in interior spaces. The illumination elements to illuminate indoor spaces were considered, not individually, but as a system. So, during the planned maintenance periods of an illumination system, after its design and installation, simple brightness level measurements must be taken. For a three-dimensional evaluation of the brightness level in indoor spaces in a speedy and accurate manner, the obtained brightness level measurement results and artificial neural network model were used. Upon estimation of the most suitable brightness level for indoor spaces by using the artificial neutral network model, the energy demands required by the illumination elements decreased. Consequently, in this study, with estimations of brightness levels, the extent to which the artificial neutral networks become successful was observed and more correct results have been obtained in terms of both economy and usage.

• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.401-407
• /
• 2000

An elastic-plastic finite element analysis is performed to investigate detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The finite element analysis performed under plane stress using 4-node isoparametric elements can predict fatigue crack closure behavior. The mesh of constant element size along crack surface can not predict the opening level of fatigue crack. The crack opening level for the constant mesh size increases linearly from initial crack growth. The crack opening level for variable mesh size, is almost flat after crack tip has passed the monotonic plastic zone. The prediction of crack opening level using the variable mesh size proportioning the reversed plastic zone size with the opening stress intensity factors presents a good agreement with the experimental data regardless of stress ratios.

• Journal of Korea Multimedia Society
• /
• v.18 no.7
• /
• pp.827-833
• /
• 2015

In this paper, we have compared three level set-based active contour (LSAC) methods on inhomogeneous MR image segmentation which is known as an important role of brain diseases to diagnosis and treatment in early. MR image is often occurred a problem with similar intensities and weak boundaries which have been causing many segmentation methods. However, LSAC method could be able to segment the targets such as the level set based on the local image fitting energy, the local binary fitting energy, and local Gaussian distribution fitting energy. Our implemented and tested the subcortical image segmentations were the corpus callosum and hippocampus and finally demonstrated their effectiveness. Consequently, the level set based on local Gaussian distribution fitting energy has obtained the best model to accurate and robust for the subcortical image segmentation.