• 기술혁신연구
• /
• 제16권2호
• /
• pp.1-16
• /
• 2008

This paper shows that labor mobility is positively related to R&D intensity at the industry level in Korea. Different from the perception based on individual firm-level studies arguing that firms can be reluctant to R&D in fear of the job transfer of employees, firms in industries which have high job transfer of employees turn out not to reduce investment in R&D. This result is also confirmed by 2SLS regression. This result supports that, if there exist spillover effects through the job transfer of employees, job transfer can positively contribute to R&D activities.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.662-670
• /
• 1999

A numerical prediction was performed to clarify the air motion in the cylinder of an axisymmet-ric four-stroke reciprocating engine at its intake and compression stage. A scheme of finite volume method is used for the calculation. Modified $k-{\varepsilon}$ turbulence model is adopted and wall function is applied to the grids near the wall. The predicted mean velocity and rms velocity profiles showed a reasonable agreement with an available experimental data at its intake and compression stage. The predicted in-cylinder flow fields show that a strong turbulent twin vortex structure is pro-duced during induction but it commences to decay rapidly around inlet valve closure. The mean velocity continues to fall to a low level during compression but the turbulence intensity attains an approximate constant level.

• 천문학논총
• /
• 제30권2호
• /
• pp.235-236
• /
• 2015

Microlensing can be seen as a version of strong gravitation lensing where the separation angle of the image formed by light deflection by a massive object is too small to be seen by a ground based optical telescope. As a result, what can be observed is the change in light intensity as function of time; the light curve. Conventionally, the intensity of the source is expressed in magnitudes, which uses a logarithmic function of the apparent flux, known as the Pogson formulae. In this work, we compare the magnitudes from the Pogson formulae with magnitudes from the Asinh formulae (Lupton et al. 1999). We found for small fluxes, Asinh magnitudes give smaller deviations, about 0.01 magnitudes smalller than Pogson magnitudes. This result is expected to give significant improvement in detection level of microlensing light curves.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제26권1호
• /
• pp.15-29
• /
• 1998

The numerical simulation of heavy precipitation event occurred in the central Korean Peninsula on July 26-28, 1996 was performed using the fine mesh model. ARPS (Advanced Regional Prediction System) developed by the CAPS (Center for Analysis and Prediction of Storms). Usually, the heavy rainfalls occurred at late July in the Korean Peninsula were difficult to predict, and showed very strong rainfall intensity. As results, they caused a great loss of life and property. As it usual, this case was unsuccessful to predict the location of rain band and the precipitation intensity with the coarse-mesh model. The same case was, however, simulated well with fine-mesh storm-scale model, ARPS. Moisture band at 850 hPa appeared along the Changma Front in the area of China through central Korea passed Yellow Sea. Also the low-level jet at 700 hPa existed in the Yellow Sea through central Korea and they together offered favorable condition to induce heavy rainfall in that area. The convective activities developed to a meso-scale convective system were observed at near the Yangtze River and moved to the central Korean Peninsula. Furthermore, the intrusion of warm and moist air, origninated from typhoon, into the Asia Continent might result in heavy rainfall formation through redistribution of moisture and heat. In the vertical circulation, the heavy rainfall was formed between the upper- and low-level jets, especially, the entrance region of the upper-level jet above the exit the region of the low-level jet. The low level convergence, the upper level divergence and the strong vertical wind were organized to the very north of the low level jet and concentrated on tens to hundreds km horizontal distance. These result represent the upper- and low-level jets are one of the most important reasons on the formation of heavy precipitation.

• 생명과학회지
• /
• 제18권10호
• /
• pp.1455-1463
• /
• 2008

The purpose of this study was to evaluate the effect of various exercise intensity on Excess post exercise energy expenditure (EPEE), Resting Metabolic Rate (RMR),thyroid hormonal changes and biochemical variables in obese and NIDDM patients. The subject of the present study were divided into four groups and four periods: trained (T; n=10), control (C; n=10), obese (O; n=10) and NIDDM (N; n=10) group. And the periods were divided as follows; Resting (RE), Maximal (MA), High intensity (HI), and Low intensity (LI). There was significant difference in RMR among different intensity of exercise. in the T (p<0.05) not in the C, O, and N groups. however, there was no significant different percent body fat among all groups. In the energy expenditure, there was significant different among C, O, N groups compare to T in HIEE (high intensity exercise energy expenditure), LIEE (low intensity exercise energy expenditure), HIEEPE (high intensity exercise energy expenditure post exercise) and LIEEPE (low intensity exercise expenditure post exercise). In the hormonal level, there was significant different in T4 level in the T group at LI period and there was also significant difference in T4, Free T3, & Free T4 levels in T group at LI period, however there was no significant different in the O and N groups except LI period. In the fatigue variables, there was significant different in lactate and ammonia levels in the N group in the period of HI compare to C. The present cross-sectional study was design to investigate the relationship between exercise intensity and RMR in four groups. The focus of this investigation was to compare RMR in aerobically trained (T), control (C), obese (O) and NIDDM (N) group. The relationship among RMR, exercise intensity and percent body fat would best be investigated using Meta Lyzer 3B, MMX3B and body composition analyzer. Each subject completed measurement of percent body fat, RMR, hormone in the period of maximal oxygen uptake exercise (MA), high intensity exercise (HI), and low intensity exercise (LI). From the results, High and Low intensity of exercise, there was a trend for an increased RMR (kcal/day) in the trained groups and control group (in case of LI) not for the obese and N groups. This is best explained not by the reduced percent body fat but by the highly induced energy expenditure (during exercise and post exercise energy expenditure) and increased T4, Free T3, and Free T4 hormonal levels in the low intensity exercise for the T group and sometimes C group.

• 한국산림과학회지
• /
• 제95권6호
• /
• pp.649-656
• /
• 2006

인공강우발생장치를 이용하여 4년간 대구 동구지역에 발생한 산불발생지를 대상으로 산불발생지사면의 토양침식량을 계량화하기 위하여 산불발생 후 경과년수에 띠라 각 지역에 대한 강우강도 및 경사별로 토양침식량을 관측하여 산불발생지의 토양침식 특성을 구명하고, 또한 토양침식량과 강우강도, 경사, 경과년수와의 관계를 분석한 결과는 다음과 같다. 1. 산불발생연도별 토양침식량은 강우강도가 30 mm/hr씩 증가함에 따라서 1.9~5.7배 증가하였고, 경사가 $10^{\circ}$씩 증가함에 따라서는 1.4~14.2배 증가하였다. 2. 산불발생당년에는 강우강도 80 mm/hr, 경사 $30^{\circ}$에 대해 초기 강우 10분 동안 토양침식이 많이 발생하였으며, 시간이 경과할수록 점차 그 양이 감소하는 경향을 보였고, 산불발생 후 2년 뒤부터는 강우강도 및 경사별로 경과시간에 따른 토양침식량은 거의 일정하였다. 3. 산불발생 후 경과년수에 따라 강우강도 및 경사별 토양침식량은 산불발생 3년 후의 경우 발생당년에 비해 28.9%~94.1%로 감소하였고, 산불발생당년에는 강우강도 및 경사별로 토양침식량이 많았으며, 산불발생 후 2년 뒤부터 점차 토양침식량의 감소추세가 둔화되었다. 4. 산불발생지사면에서의 토양침식량에 대해 각 인자간의 영향성을 분석한 결과, 강우강도, 경사, 경과년수의 각각의 주효과와 강우강도${\times}$경사, 강우강도${\times}$경과년수의 상호작용 효과에 대해서는 차이를 보였고, 경사${\times}$경과년수, 강우강도${\times}$경사${\times}$경과년수의 상호작용 효과에 대해서는 차이가 없었다. 토양침식량에 영향을 미치는 인자의 영향도는 강우강도가 가장 큰 영향을 미치고 다음이 경사, 경과년수의 순이었다. 5. 토양침식량과 이에 영향을 미치는 인자들과의 상관관계에 있어서, 강우강도, 경사간에는 1%수준에서 유의적인 정(+)의 상관관계가 있었고, 경과년수는 1%수준에서 유의적인 부(-)의 상관관계가 나타났다. 6. 토양침식량과 이에 영향을 미치는 인자들과의 회귀분석 결과, 산불발생지사면에서 토양침식량을 설명하는데 유의한 인자는 강우강도, 경사, 경과년수이었다. 7. 강우강도, 경사, 경과년수를 이용하여 다음과 같은 토양침식량 추정식을 산출하였다. S.E = 0.092R.I + 0.211D.S - 0.942E.Y(S.E : 토양침식량, R.I: 강우강도, D.S: 경사, E.Y: 경과년수)

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.72-78
• /
• 2021

Objective: The purpose of this study was to investigate relations and effectiveness about mountain climbling exercise with different level of support surfaces by analyzing heart rate and EMG data. A total of 10 male college students with no musculoskeltal disorder were recruited for this study. Method: The biomechanical analysis was performed using heart rate monitor (Polar V800, Polar Electro Oy, Finland), step-box, exercise mat, and EMG device (QEMG8, Laxtha Inc. Korea, sampling frequency = 1,024 Hz, gain = 1,000, input impedance > 1012 Ω, CMRR > 100 dB). In this research, step-box were used to create different surface levels on the upper body (flat surface, 10% of subject's height, 20% of subject's height, and 30% of subject's hight). Based on these different conditions, data was collected by performing mountain climbing exercise during 30 seconds. Subjects were given 5 minutes of break to prevent muscular fatigue after each exercise. For each dependent variable, a one-way analysis of variance with repeated measures was conducted to find significant differences and Bonferroni post-hoc test was performed. Results: The results of this study showed that exercise intensity was reduced statistically as increased surface level on the upper body. Muscle activity of the upper rectus abdominis and biceps femoris for 30% of surface level was significantly higher than the corresponding values for flat surface. However, the opposite was found in the rectus femoris. In general, muscle activity of the lower rectus abdominis, erector spinae, external oblique abdominis, and gluteus maximus increased when surface level increased, but the differences were not significant. Conclusion: As a result, the increase in surface level of the body would change muscle activity of the upper body, indicating that different surface level of the upper body may cause significant effect on particular muscles to be more active during mountain climbing exercise. Based on results of this study, it is suggested to set up an appropriate surface level to target particular muscle to expect an effective training. It is also important to set adequate surface levels to create an effective training condition for preventing exercise injuries.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.373-378
• /
• 2007

Soft switching was applied to the multi-level inverter to enhance the performance of the high-intensity discharge (HID) ballast used in vehicle headlights. The electrical properties were investigated and the available modeling of ballast in steady state was calculated using mathematical methods. The result was used in analyzing the power characteristics. The modeling was confirmed by the experiment.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1290-1294
• /
• 2008

We present a novel deblurring algorithm for bi-level images blurred by some parameterizable point spread function. The proposed method iteratively searches unknown parameters in the point spread function and noise-to-signal ratio by minimizing an objective function that is based on the binariness and the difference between two intensity values of restoring image. In simulations and experiments, the proposed method showed improved performance compared with the Wiener filtering based method in terms of bit error rate after segmentation.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1999년도 제51차 추계 학술대회 연제집
• /
• pp.202-203
• /
• 1999