• 제목/요약/키워드: Intensity Reduction

검색결과 939건 처리시간 0.027초

Quenching을 이용한 $1\mu{m}$ 미만의 Cell 형성 (Formation of cell under $1\mu{m}$ by quenching)

  • 이병희;차성운
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1420-1423
    • /
    • 2005
  • Micro Cellular Plastics create a sensation at polymer industrial for lowering product cost & overcoming a lowering of mechanical intensity. Reduction of MCPs cell size increases the intensity of MCPs. This research based on the experiment about cell size reduction method. At this study, Quenching & Pressure foaming process are introduced to one of methods. Conclusion of study is that Quenching process is the simplest process for nano cell formation.

  • PDF

저어널 베어링에서의 마찰감소현상에 대한 실험적 연구 (An Experimental Study on Friction Reduction in Journal Bearings)

  • 이득우;김경웅
    • 대한기계학회논문집
    • /
    • 제10권3호
    • /
    • pp.298-304
    • /
    • 1986
  • 본 연구에서는 첨가할 고분자로서 윤활유에 일반적으로 점도지수 향상제로 사용되는 PIB(polyisobutylene)를 사용하여, 되도록 실제 베어링에 가까운 조건에서 Toms효과에 대해 알아 본다.

고분자물질 첨가에 의한 유동특성에 관한 연구 (A Study on the Characteristics of Flow with Polymer Additives)

  • 차경옥;김재근
    • 한국자동차공학회논문집
    • /
    • 제4권3호
    • /
    • pp.176-186
    • /
    • 1996
  • The phenomena of drag reduction using small quantities of a liner macromolecules has attracted the attention of many experimental investigations. On the other hand drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to flow with cavitation which occurs pump impellers. But the research on dragreduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity and turbulent intensity whether polymer additives a horizontal single and two phase system or not. Flow pattern of air-water two phase flow was classified by electrical conductivity probe signal. Velocities and turbulent intensities of signal were measured simultaneously with a Hot-film anemometer.

  • PDF

Sound Intensity를 이용한 건물부재의 차음성능 실험실 측정방법 고찰 (Review of Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity : Laboratory Conditions)

  • 정성수;국찬;김선우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.1138-1141
    • /
    • 2002
  • In this study, the ISO 15186-1 “Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 : Laboratory conditions” was reviewed in order to make it as a new Korean Industrial Standard. Several main contents are discussed.

  • PDF

복소음향 인텐시티법을 이용한 소음원검출의 시뮬레이션 및 실차응용 (Computer Simulation for Noise Source Identification and Application to Vehicle Using Complex Acoustic Intensity Method)

  • 오재웅;김상헌;안지훈
    • 한국자동차공학회논문집
    • /
    • 제5권3호
    • /
    • pp.171-171
    • /
    • 1997
  • Sound intensity distributions and energy flow in the near field of dipole source system and flat plate were investigated. First, the effectiveness of complex acoustic intensity was proved by using mathmatical and experimental methods in order to indentify noise sources and transmission paths of dipole field which is effected by the presence of neighbouring coherent sources. Next, analytical complex acoustic intensity method was discussed and the characteristics and energy flow of sound induced from the plate are clarified. The velocity of plate obtained from Finite Element Method was used for calculation of complex acoustic intensity in the near field. Finally experimental complex acoustic intensity method was applied to a passenger car. It can be seen that complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for the identification and the reduction of vibration and noise.

Numerical analysis of NOx reduction for compact design in marine urea-SCR system

  • Choi, Cheolyong;Sung, Yonmo;Choi, Gyung Min;Kim, Duck Jool
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제7권6호
    • /
    • pp.1020-1033
    • /
    • 2015
  • In order to design a compact urea selective catalytic reduction system, numerical simulation was conducted by computational fluid dynamics tool. A swirl type static mixer and a mixing chamber were considered as mixing units in the system. It had great influence on flow characteristics and urea decomposition into ammonia. The mixer caused flow recirculation and high level of turbulence intensity, and the chamber increased residence time of urea-water-solution injected. Because of those effects, reaction rates of urea decomposition were enhanced in the region. When those mixing units were combined, it showed the maximum because the recirculation zone was significantly developed. $NH_3$ conversion was maximized in the zone due to widely distributed turbulence intensity and high value of uniformity index. It caused improvement of $NO_x$ reduction efficiency of the system. It was possible to reduce 55% length of the chamber and connecting pipe without decrease of $NO_x$ reduction efficiency.

편측 악관절 내장증 환자에서 비이환측과 이환측의 자기공명영상 소견상 원판후 조직의 비교 및 임상소견과의 관계 (THE MRI-BASED COMPARISON OF NORMAL- AND ABNORMAL-SIDE RETRODISCAL TISSUE, AND RELATIONSHIP BETWEEN CLINICAL EXAMINATION & THE MRI FINDINGS OF RETRODISCAL TISSUE IN PATIENTS WITH UNILATERAL TMJ INTERNAL DERANGEMENT)

  • 윤현중;박철홍;김진
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제28권4호
    • /
    • pp.330-335
    • /
    • 2002
  • The study was performed to investigate the comparison of relative signal intensity of normal- and abnormal-side retrodiscal tissue, and relationship between clinical examination, joint effusion and relative signal intensity of retrodiscal tissue in patients with unilateral TMJ internal derangement. The study group comprised 19 females and 9 males, with a mean age of 29 years. After measurements of the signal intensity were made on the MR imager for the T2 weighted images on retrodiscal tissue and brain gray matter, we calculated relative value and tried to find relationship between clinical examination, joint effusion and relative signal intensity on normal- and abnormal-side. The results are as follows. 1. The gray matter is an appropriate reference point. 2. The relative signal intensity is high significantly in abnormal-side retrodiscal tissue compared with normal-side retrodiscal tissue. 3. The relative signal intensity is high significantly in painful joints compared with nonpainful joints and in joints with joint effusion compared with joints without joint effusion. 4. The relative signal intensity in normal joints, joints with reduction and joints without reduction is increased in order significantly.

저칼로리 저감미도 대체감미료 시장 및 동향 (Market and trend of alternative sweeteners)

  • 김양희;김성보;김수진;박승원
    • 식품과학과 산업
    • /
    • 제49권3호
    • /
    • pp.17-28
    • /
    • 2016
  • The concerns over obesity and obesity-related health problems are increasing as many consumers relate these health problems with sugar. The demand for sugar reduction is also rising and regulatory movement by governments including Korea is driven to reflect such demand. For the past decades, there have been diverse development and marketing of various sweeteners to substitute sucrose and high fructose corn syrup. Low caloric alternative sweeteners can be divided into high intensity sweeteners that have greater sweetness potency compared to sucrose, and low intensity sweeteners such as polyols, oligosaccharides and rare sugars that have less sweetness potency. This paper discusses representative low caloric alternative sweeteners, their market and trend.

복소음향 인텐시티법을 이용한 소음원검출의 시뮬레이션 및 실차응용 (Computer Simulation for Noise Source Identification and Application to Vehicle Using Complex Acoustic Intensity Method)

  • 오재응;김상헌;안지훈
    • 한국자동차공학회논문집
    • /
    • 제5권3호
    • /
    • pp.159-171
    • /
    • 1997
  • Sound intensity distributions and energy flow in the near field of dipole source system and flat plate were investigated. First, the effectiveness of complex acoustic intensity was proved by using mathmatical and experimental methods in order to inden- tify noise sources and transmission paths of dipole field which is effected by the presence of neighbouring coherent sources. Next, analytical complex acoustic intensity method was discussed and the characteristics and energy flow of sound induced from the plate are clarified. The velocity of plate obtained from Finite Element Method was used for calculation of complex acoustic intensity in the near field. Finally experimental complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for the identification and the reduction of vibration and noise.

  • PDF

구조 인텐서티법을 이용한 에어컨 실외기의 제진재 적용 (Damping Patch Placement on Outdoor Unit of Air-conditioner by Using Structural Intensity Technique)

  • 김규식;진심원;정인화;이정우;강연준
    • 한국소음진동공학회논문집
    • /
    • 제14권7호
    • /
    • pp.577-585
    • /
    • 2004
  • In this paper, reactive shearing structural intensity method is extended to damping patches placement on outer panels of outdoor unit of air-conditioner to reduce its structural borne noise. The structural intensity is calculated from the normal velocities of structures that are measured by using a laser scanning vibrometer, and $textsc{k}$-space (wave-number domain) signal processing is used to obtain the spatial derivatives in formulation of structural intensity. This method is applied to the outdoor unit of air-conditioner on shaker-exciting mode and operating mode. and then damping patches are placed over area of high reactive shearing structural intensity for reducing the radiated noise. Experimental results show the largest reduction of sound pressure level of an outdoor unit by appling small damping patches to optimal position.