• Journal of the Korean Society of Combustion
• /
• v.11 no.3
• /
• pp.26-35
• /
• 2006

This work forcus on the development of gas sensor that measure the concentrations of exhaust gas using diode laser, Each diode laser for exhaust gas measurement is set to work at near-IR using both DA and WMS methods. Also use of fiber-coupled optical elements makes such a sensor rugged and easy to align. The results showed that gas concentrations of $O_2$, CO, $CO_2$, NO are accurately measured within ${\pm}2%$ error. The application of WMS method increased the beam intensity 2-3 times higher than DA method. It were experimentally compared WMS (Wavelength Modulation Spectroscopy) with DA (Direct Absorption) for the accuracy.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.217-219
• /
• 2009

A GMI magnetic field sensor working based on time-coded principle has been investigated and designed. The laboratory model has been constructed and tested carefully, demonstrating the sensitivity of $3\;{\mu}s/{\mu}T$ in the field range of ${\pm}100\;{\mu}T$. An amorphous thin wire, $100\;{\mu}m$ in diameter ${\times}50\;mm$ in length, was chosen to be sensing element which was fit into a small field modulation coil of 60 mm in length. The sensor is working based on a time-coded principle that, with the magnetic field modulation was chosen in range of hundreds of Hz, the change in time interval of two adjacent GMI peaks relating to external DC magnetic field is proportional to the intensity of the external field to be measured. This mechanism has made a great improvement to the linearity of the sensor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.49-55
• /
• 2010

In this paper, we propose the symbol decision method considering the non-uniformity in color space and analyze the BER performance of modulation scheme based on color space, comparing with the conventional WDM scheme based on light intensity. Through numerical simulation, we show the BER performance superiority under the condition of AWGN and common mode noise.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.937-943
• /
• 1990

In this paper, a subband coding scheme using the human visual system(HVS) model for encoding monochrome images is proposed to produce perceptually higher quality images compared with the regular subband coding scheme. The proposed approach first transforms the intensity image to the density image by a point nonlinear transformation. A frequency band dexomposition of the density image is carried out by means of 2-D seaprable quadrature mirror filters, which split the density image spectrum into 16 equall rate subbands. Bits are allocated among the subbands to minimize the weighted mean squar error (WMSE) for differential pulse code modulation(DPCM) coding of the subbands. The weight for each subband is calculated from the modulation transfer function (MTF) of the HVS model at corresponding frequencies. The performances of the proposed approach are evaluated for 256 * 256 monochrome images at the bit rates of 0.5, 0.75 and 1.0 bita per pixel. Computer simulation results indicate that using the HVS model yields more pleasing reconstructed images than regular subband coding approach which does not use HVS model.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.42-44
• /
• 1995

The original DANTE sequence and its variations have limitation in excitation profile (a sinc function-like excitation) due to the finite duration of the DANTE pulsetrain. This sinc function-like selection profile excites only a small fraction of the spins in the pixel thereby results in poor signal to noise ratio (only about ${\sim}1%$ of normal MR imaging sequence). Therefore, this poor signal to noise ratio (SNR) has been the main drawback of the original DANTE sequence. To improve the signal to noise ratio, phases of individual RF pulses in the DANTE pulse train were modulated so that more spins in the object were excited ($1{\sim}3$). We have introduced a new FM (Frequency Modulation) DANTE sequence and analyzed the signal intensity and excitation profiles.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.148-151
• /
• 2011

We designed and fabricated aluminium gallium nitride (AlGaN)/GaN high electron mobility transistors (HEMTs) with stable reverse blocking characteristics established by employing a selective fluoride plasma treatment on the drainside gate edge region where the electric field is concentrated. Implanted fluoride ions caused a depolarization in the AlGaN layer and introduced an extra depletion region. The overall contour of the depletion region was expanded along the drift region. The expanded depletion region distributed the field more uniformly and reduced the field intensity peak. Through this field modulation, the leakage current was reduced to 9.3 nA and the breakdown voltage ($V_{BR}$) improved from 900 V to 1,400 V.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1970

In this paper, theoretical and experimental study about the light modulation at X-band(9375MHz) micro wave, using the linear electro-optic effect, has been described. The electro-optic crystal, KDP (potassium dihydrogen phosphate)is used for modulator crystals which is composed resonated modulator. Output performances of modulated wave through movable short positions are presented. It was critically respond from 2. And the output modulated intensity was compared with theoretical curve. Consequently, in spite of many problems remain yet, most promissing and more sucessful modulator configurations are compleely given.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.286-294
• /
• 1990

The objective of this paper lies in presenting in theory an interpretation of how signals are detected from the real-time A/O correlator, and scrutinize by experimental processes, thereby to devise a method by which correlation function can be detected in a favorable way in time. An A/O system for real-time correlation function of two signals has been constructed. This optical correlator when at work in intensity modulation mode by acousto- optic device renders higher output signal to noise ration, as compared with the traditional optical signal detection, has simple system as compared with existing optical correlator in amplitude modulation mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.310-312
• /
• 2015

In this paper, we propose an SIM/SM system with a square-law combining. In an outdoor environment, the performance of SIM/SM deteriorates due to an atmospheric turbulence. The square-law combining technique can enhance the performance of the SIM/SM by employing square-and-integrate operation at the receiver side. For various spectral efficiencies, the performance gain increases as the number of photodetectors increases. Furthermore, as the turbulence strength increases, the performance gain also increases.