• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.629-640
• /
• 2019

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α₁ was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1461-1471
• /
• 2021

This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.837-847
• /
• 2016

Tone mapping for High Dynamic Range(HDR) image provides matching human visual perception between real world scene and displayable devices. Recently, a tone mapping algorithm based on localized gamma correction is proposed. This algorithm is using human visual properties of contrast and colorfulness with background intensity, generating a weight map for gamma correction. However, this method have limitations of controlling enhancement region as well as generating halo artifacts caused by the weight map construction. To overcome aforementioned limitations, proposed algorithm in this paper modifies previous weight map, considering base layer intensity of input luminance channel. By determining enhancement region locally and globally based on base layer intensity, gamma values are corrected accordingly. Therefore, proposed algorithm selectively enhances local brightness and controls strength of edges. Subjective evaluation using z-score shows that our proposed algorithm outperforms the conventional methods.

• 인터넷정보학회논문지
• /
• 제7권4호
• /
• pp.33-43
• /
• 2006

본 논문에서는 조영 영상을 받아들여 관상동맥을 효과적으로 추출하는 방법을 소개한다. 혈관 추출에 일반적으로 사용되는 디지털 혈관조영술(DSA : Digital Subtraction Angiography)은 조영제 투입 전에 촬영된 마스크 영상과 조영제 투입 후의 혈관 대비가 나타나는 라이브 영상과의 차이를 이용하여 빠르게 혈관 영역만을 검출하는 방법이다. 그러나 이 방법은 배경의 움직임에 민감하고 두 영상간의 지역적인 배경 명암 분포의 변화에 따라 오 검출이 발생할 수 있다는 단점을 가진다. 따라서 본 논문에서는 배경 텍스쳐의 유사도를 분석하여 움직임의 차이가 가장 작은 영상을 선택함으로써 배경의 움직임에 기인하는 구조적인 문제를 해결하고, 선택된 영상의 지역적 명암 보정을 통해 혈관 영역만을 효과적으로 추출하는 방법을 제안한다. 실험 결과는 제안된 방법이 기존의 방법보다 오 인식률은 감소하고 정확도는 증가함을 보여준다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.270-273
• /
• 2007

In this paper, a SAR-despeck1ing approach of adaptive iteration based a Bayesian model using the lognormal distribution for image intensity and a Gibbs random field (GRF) for image texture is proposed for noise removal of the images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel types as states of molecules in a lattice-like physical system. The iterative approach based on MRF is very effective for the inner areas of regions in the observed scene, but may result in yielding false reconstruction around the boundaries due to using wrong information of adjacent regions with different characteristics. The proposed method suggests an adaptive approach using variable parameters depending on the location of reconstructed area, that is, how near to the boundary. The proximity of boundary is estimated by the statistics based on edge value, standard deviation, entropy, and the 4th moment of intensity distribution.

• Investigative Magnetic Resonance Imaging
• /
• 제9권1호
• /
• pp.36-42
• /
• 2005

목적 : 위상 배열(phased array) 코일의 sensitivity profile을 추정하는 알고리즘을 제시하고, 이로부터 위상 배열 코일 영상에서 나타나는 밝기 비균등성 문제를 해결하고자 한다. 대상 및 방법 : 코일의 sensitivity profile을 추정하기 위해, 우선 그 영상을 여러 각도에 대해 회전을 시켜가면서 projection 데이터를 얻는다. 영상의 해부학적인 구조, 즉 고주파 성분을 제거하기 위해, 앞에서 구한 projection 데이터에 적절한 curve fitting을 적용하여, projection profile을 부드럽게 변하는 곡선으로 만든다. Fitting된 projection profile에 filtered back projection 알고리즘을 적용하면, 원하는 코일의 sensitivity profile을 얻을 수 있다. 추정된 코일의 sensitivity profile 정보를 이용하여 획득한 위상 배열 코일 영상의 밝기를 균등화시킨다. 제안된 알고리즘은 각각, 8채널 및 4채널 위상 배열 코일을 사용하여 얻은 phantom과 사람 뇌 영상에 대해 적용해 봤다. 결과 : 알고리즘의 성능을 측정하기 위해, 본 알고리즘으로부터 얻어진 결과와 단순히 위상 배열코일 영상에 sum-of-square를 취하여 얻어진 결과의 밝기 균등성을 서로 비교해 보았다. 이때, 본 알고리즘으로부터 얻어진 영상의 밝기 균등성이 sum-of-square의 경우보다 더 높음을 확인할 수 있었다. 정량적으로는 밝기 변화량이 제안한 알고리즘에 의해 $13.1\%$에서 $6.1\%$로 감소되었다. 결론 : 제안한 알고리즘은 위상 배열 코일로부터 얻어진 영상의 밝기 비균등성을 효과적으로 보정할 수 있었다.

• 정보처리학회논문지B
• /
• 제18B권5호
• /
• pp.265-270
• /
• 2011

본 논문에서는 이진화기반 영역분할을 이용한 3D입체영상의 밝기 보정방법을 제안한다. 제안된 방법은 입력된 좌우 3D입체영상 중 우 영상을 이진화를 통한 영역분할을 하고 크기가 작은 영역들은 제거한다. 다음 우 영상의 각 영역들에 대해 대응되는 좌 영상내의 영역을 상관계수(correlation coefficient)를 이용한 정합을 통해 추출한다. 영역단위의 매칭을 할 때 영역들 간의 겹침을 방지하기 위하여 모폴로지 필터로 영역경계에 인접한 일정부분을 제거한다. 그리고 좌우 영상의 영역 간 히스토그램 명세화를 수행함으로써 우 영상의 밝기 보정을 한다. 실험에서 좌 영상으로부터 블록단위 움직임보상으로 우 영상을 생성했을 때 제안한 방법이 블록평균 정합오차가 가장 작은 것을 확인 할 수 있었다.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• 산업융합연구
• /
• 제1권2호
• /
• pp.53-67
• /
• 2003

This paper intends to contribute to the understanding of customer repurchase by studying the relationship between correction of postpurchase dissonance and intention of customer repurchase. Previous studies have broadly speculated on the relationship between the intensity of dissatisfaction and repurchase; few empirical results have, however, been reported. This study is based on a convenience sample of 257individuals who reported intensity of dissatisfaction and type of responses to dissatisfying retailing service situations. The results of an empirical study, the relationship is found between correction of postpurchase dissonance and intention of customer repurchase. And it examines the relatively important marketing factors influencing customer repurchase.

• 산업기술연구
• /
• 제19권
• /
• pp.269-278
• /
• 1999

When a variety of repeated loads are given, most steel structures failed in much lower level of loads than static failure loads. In addition, bridge always includes the internal defects or discontinuities. from these, fatigue cracks initiates and can lead to sudden failure. Thus, in this study, tensile specimens by the cover plate shapes were used as the test specimens. The fatigue test was performed by constant amplitude fatigue loading and beach mark. From the results of this study, each specimen's fatigue section was observed. in addition, stress intensity factor at crack tip was calculated by using the Green's function which applied to discontinuous section where causing stress concentration. Therefore, the fatigue life of structural detail was investigated by adopting the theories of fracture mechanics. each specimen's crack shape is a semi-elliptical surface crack or center crack sheet, stress gradient correction factor, Fg is the most subjective of all stress intensity correction factors and fatigue life should be predicted by previous proposed function and finite element analysis.