• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.193-198
• /
• 2019

This study analyzed the changes of vowel formant, voice intensity, and fundamental frequency of vowels for 11 months using acoustochemical spectrogram analysis of women diagnosed with amyotrophic lateral sclerosis (ALS). The test word was a vowel /a, i, u/ and a diphthong /h + ja + da/, /h + wi + da/, and /h +ɰi+ da/. Speech data were collected through the word reading task presented on the monitor using 'Alvin' program, and the recording environment was set to 5,500 Hz for the nyquist frequency and 11,000 Hz for the sampling rate. The records were analyzed by using spectrograms to vowel formants, voice intensity, and fundamental frequency. As a result of analysis, the fundamental frequency and intensity of the ALS process were decreased and the formant slope of the diphthong was decreased rather than the formant change in the vowel. This result suggests that the vowel distortion of ALS due to disease progression is due to the decrease of tongue and jaw co morbidity.

• Journal of Korea Water Resources Association
• /
• v.49 no.10
• /
• pp.823-833
• /
• 2016

This study developed a trivariate Copula function based drought frequency analysis model to better evaluate the recent 2014~2015 drought event. The bivariate frequency analysis has been routinely used for the drought variables of interest (e.g. drought duration and severity). However, the recent drought patterns showed that the intensity can be regarded as an important factor which is being characterized by short duration and severe intensity. Thus, we used the trivariate Copula function approach to incorporate the trivariate drought characteristics into the drought frequency analysis. It was found that the return periods based on the trivariate frequency analysis are, in general, higher than the existing bivariate frequency analysis. In addition, this study concludes that the increase in drought frequency claimed by the Gumbel copula function has been overestimated compared to the Student t Copula function. In other words, the selection of copula functions is rather sensitive to the estimation of trivariate drought return periods at a given duration, magnitude and intensity.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.227-239
• /
• 2021

A practical and effective method of X-ray powder diffraction analysis was investigated for quantitative analysis of the mineral content of natural samples. Sample mounting experiments were conducted to select the best randomly oriented powder sample mount. A comparative experiment was also made between a reference intensity ratio (RIR) method, which compares a single peak intensity with standard material, and the Rietveld method, which calculates a full X-ray diffraction pattern, to search for the effective method of mineral quantification. In addition, samples containing amorphous minerals were quantitatively analyzed by the Rietveld method and the efficiency was reviewed. As a result of the study, the optimal random orientation could be reached by the side mounting method. The Rietveld method using the full pattern of X-ray diffraction was more suitable for mineral quantitative analysis, rather than the RIR method using a specific peak. However, either method could depend on the analyst's experience in addition to analytical technique. Moreover, amorphous minerals can be quantitatively analyzed by the Rietveld method, and the analysis results make the geological analysis possible.

• Journal of Global Scholars of Marketing Science
• /
• v.12
• /
• pp.99-119
• /
• 2003

A model is proposed for the role of emotional intensity of a web site, and the moderating influence of product involvement, in the Integrative Framework of persuasion (Meyers-Levy and Malvaiya 1999). The model also appropriately operationalizes the constructs emotional intensity of a web site and product involvement The three routes to persuasion, Central, Peripheral, and Experiential correspond to high, moderate, and low involvement (Meyers-Levy and Malaviya 1999). The involvement construct is measured from message recipients using the Personal Product Inventory (Pill, which was developed to capture the concept of product involvement (Zaichkowsky 1985). The conceptualization of the Personal Product Inventory is a contextrree measure that also has robust psychometric properties when applied to advertisements (Zaichkowsky 1994). The propositions highlight the expected importance of emotional intensity of a web site. The moderating influence of product involvement is also proposed. Specifically, what this work proposes is that the emotional intensity of a product site has a larger impact on attitude change under low product involvement, as opposed to moderate product involvement. Support for this reasoning can be found in the persuasion literature (Petty et al 1986). The Petty et al (1986) frame work is a dual process descriptive and predictive frame work in the area of altitude formation and change. Recently, Myers Levy and Malaviya (1999) have proposed a tri-process framework. This is in tum based on the dual process model of Petty et al. (1986). The study outlined in this paper aims to deepen the Meyers Levy and Malaviya (1999) and frame work. The propositions outlined in the model are empirically tested using a repeated measures experimental design. The emotional intensity is measured using a scale that is based on experts judgments. Using a paired comparison t-test two sites are determined to be of high and low emotional intensity. The model is tested using a repeated measures experimental design. The first independent variable Emotional Intensity of the site is manipulated. The Second independent variable, Personal Product Inventory is measured. While, the dependent variable, product altitude change will also be measured. Utilizing Analysis of Variance (ANOVA) the data is analyzed using SPSS. The results suggest that besides the rational content of messages their emotional content can also influence attitude change. Specifically, it is proposed that the manipulation of emotional intensity of a product Web site has a greater impact on product altitudes under high and low product involvement conditions, rather than moderate product involvement. However, the results for product involvement as a continuous variable has a p value of 0.09. Further, the results for three levels of product involvement were far from significant. For two levels of product involvement also, the results were insignificant, the p value approached 0.20. This evidence indicates that it is premature to conclude that there are three routes to persuasion. A caveat, however, must be added, in that the manipulations may not have been strong enough to test the proposed hypotheses. Further, undoubtedly, there is unequivocal evidence the emotional intensity of a product Web site, as measured here, has a direct impact on product attitudes.

• Journal of Animal Science and Technology
• /
• v.64 no.5
• /
• pp.985-996
• /
• 2022

This study investigated the effects of light intensity on growth performance, blood components, eye condition, and carcass characteristics of broiler chickens. Three hundred and fifty-two 1-day-old male chicks were assigned to one of four treatments (four repetitions per treatment, 22 birds per repetition) and reared in a floor pen for 5 weeks. From the second week, chicks were reared under four different levels of light intensity (5, 20, 35, and 50 lx) and the lighting duration was maintained at 18-hours light : 6-hours dark (18L : 6D). The feed intake and body weight were measured weekly. At 35 days of age, 12 birds per treatment were randomly selected for blood sampling, eye measurement, and carcass analysis. There were no significant differences in body weight gain, feed intake, and feed conversion ratio among treatments. Triglyceride levels in the serum were significantly higher in the 5 lx treatment, and creatinine was significantly lower in the 5 lx treatment (p < 0.05). The heterophil : lymphocyte ratios decreased significantly as light intensity increased (p < 0.05); however, other blood cell compositions were not affected by light intensity. Interleukin-6 content was significantly higher in the 5 lx treatment than in other treatments (p < 0.05), but the content of tumor necrosis factor-α was not significantly different among treatments. Serum corticosterone concentration was significantly higher at 5 lx than at 20, 35, and 50 lx (p < 0.05). The corneal diameter was the highest in 5 lx treatment (p < 0.05), and tended to increase as the light intensity decreased. Other eye parameters were not significantly different among treatments, but displayed a tendency to increase as the light intensity decreased. Carcass yield and part yields were not affected by light intensity. Meat quality parameters (pH, color, cooking loss, and water-holding capacity) did not show significant difference among the treatments. The results indicate that a light intensity of 5 lx may increase physiological stress or have a negative effect on broiler welfare, even if the performance and carcass characteristics are not affected. Therefore, a light intensity of 20 lx or above is recommended considering both the growth performance and welfare of broilers.

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.1044-1050
• /
• 2010

Endoscopic ultrasonography is a medical procedure in endoscopy combined with ultrasound to obtain images of the internal organs. It is useful to have a predictive pathological manifestation since a doctor can observe tumors under mucosa. However, it is often subjective to judge the degree of malignant degeneration of tumors. Thus, in this paper, we propose a feature analysis procedure to make the pathological manifestation more objective so as to improve the accuracy and recall of the diagnosis. In the process, we extract the ultrasound region from the image obtained by endoscopic ultrasonography. It is necessary to standardize the intensity of this region with the intensity of water region as a base since frequently found small intensity difference is only to be inefficient in the analysis. Then, we analyze the spot region with high echo and calcium deposited region by applying LVQ algorithm and bit plane partitioning procedure to tumor regions selected by medical expert. For detailed analysis, features such as intensity value, intensity information included within two random points chosen by medical expert in tumor region, and the slant of outline of tumor region in order to decide the degree of malignant degeneration. Such procedure is proven to be helpful for medical experts in tumor analysis.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.390-397
• /
• 2009

Endoscopic ultrasonography is a medical procedure in endoscopy combined with ultrasound to obtain images of the internal organs. It is useful to have a predictive pathological manifestation since a doctor can observe tumors under mucosa. However, it is often subjective to judge the degree of malignant degeneration of tumors. Thus, in this paper, we propose a feature analysis procedure to make the pathological manifestation more objective so as to improve the accuracy and recall of the diagnosis. In the process, we extract the ultrasound region from the image obtained by endoscopic ultrasonography. It is necessary to standardize the intensity of this region with the intensity of water region as a base since frequently found small intensity difference is only to be inefficient in the analysis. Then, we analyze the spot region with high echo and calcium deposited region by applying LVQ algorithm and bit plane partitioning procedure to tumor regions selected by medical expert. For detailed analysis, features such as intensity value, intensity information included within two random points chosen by medical expert in tumor region, and the slant of outline of tumor region in order to decide the degree of malignant degeneration. Such procedure is proven to be helpful for medical experts in tumor analysis.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.825-848
• /
• 2022

This paper analyzed the factors for increasing energy consumption in the domestic manufacturing sector using the LMDI (Log mean division index) decomposition method for the period from 1999 to 2019. Among the LMDI decomposition analysis methods, both additive and multiplicative factor decomposition methods were used. in this analysis. According to the result of the analysis, the factor that increased energy consumption in the domestic manufacturing industry was the production effect, and the structure effect and intensity effect were found to be the factors that decreased energy consumption. In particular, the reduction of energy consumption due to the structure effect was greater than that of energy consumption effect due to the intensity effect. By period, it can be seen that energy consumption increased rapidly due to the production effect until 2011, but after that, the increase in energy consumption due to the production effect slowed down. On the other hand, after that, the energy reduction effect due to the structure effect and the intensity effect became prominent. In order to save energy in the manufacturing sector in the future, energy diagnosis and management through EMS (Energy management system) and FEMS (Factory energy management system) are more necessary. In addition, restructuring into a low-energy consumption industry seems more necessary.

• Environmental and Resource Economics Review
• /
• v.17 no.2
• /
• pp.255-286
• /
• 2008

In this paper, it is tried to combine the decomposition method and econometric analysis for the extension of the decomposition method. Since two approaches approach the energy efficiency problem in the different perspectives, it is believed that it is hard to reconcile the results of two approaches. In the results of energy intensity effect analysis with the econometric method, it is found that the increase in the energy price results in the improvement of energy intensity effect. In enconometric analysis of energy efficiency, the coefficient of a time trend measured as a proxy of energy efficiency is significant and has a negative effect on the energy consumption. This finding implies the energy efficiency improves very slowly over time. In addition, the directions of energy efficiency improvement in the decomposition method are consistent with those in the econometric analysis in four industries. This finding indicates that two methods may be in complementary cooperation for the analysis of energy efficiency. Therefore, it is needed the efforts to seek the complementarity between two methods for the enhancement of academic and policy implications.

• Physical Therapy Korea
• /
• v.27 no.2
• /
• pp.102-110
• /
• 2020

Background: There is an opinion that improper postures of the head and cervical spine are associated with temporomandibular joint (TMJ) disorders (TMDs). Objects: The aim of this study was to investigate the proportions among the cervical kyphotic angle, physical symptoms including the pain intensity level of the TMJ, and severity of TMD disability in patients diagnosed with TMD. Methods: Sixty-two subjects participated in the study. The evaluation tools included measurements of the cervical kyphotic angle based on the Ishihara index, pressure pain threshold (PPT) on the TMJ, maximal mouth opening (MMO) without pain, current pain intensity level of the TMJ measured using the Quadruple Visual Analogue Scale (QVAS), Korean TMD (KTMD) disability index, KTMD Symptom Frequency/Intensity Scales (SFS/SIS), and Korean Headache Impact Test-6. Correlation analysis was conducted to investigate the correlations between the cervical kyphotic angle and parameters related to TMJ symptoms. Results: Variables that were significantly correlated with the cervical kyphotic angle were the PPT around the TMJ (r = 0.259, p < 0.05), current pain intensity level of the TMJ based on the QVAS (r = -0.601, p< 0.01), and usual pain intensity level based on the SIS (r = -0.379, p < 0.01). The level of TMD functional disability was significantly correlated with the degree of headache (r = 0.551, p < 0.01), level of PPT of the TMJ (r = -0.383, p < 0.01), pain-free MMO (r = -0.515, p < 0.01), pain intensity level of the TMJ based on the QVAS (r = 0.393, p < 0.01), TMD symptom frequency (r = 0.739, p < 0.01), usual pain intensity of the TMJ (r = 0.624, p < 0.01), and most severe pain intensity of the TMJ (r = 0.757, p < 0.01). Conclusion: There is a positive correlation between the cervical kyphotic angle and PPT and a negative correlation between the current and usual pain intensity levels of the TMJ. The cervical kyphotic angle was a predictor of the pain level, tenderness threshold, and intensity of pain in the TMJ.