• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1534-1540
• /
• 2006

Concurrent Engineering (CE) is a popular method employed in product development. It treats the whole product design process by the consideration of product quality, cost, rate of progress, and demands of customers. The development of computer and network technologies provides a strong support to the realization of CE in practice. Aiming at the characteristics of CE and network collaborative design, this paper built network collaborative design system frame. Through the analysis of the network collaborative design modes based on CE, this paper provided a novel network collaborative design integration model. This model can integrate the product design information, design process, and knowledge. Intelligent collaboration was considered in the proposed model. The study showed that the proposed model considered main factors such as information, knowledge, and design process in collaborative design. It has potential application in CE fields.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.419-427
• /
• 2000

Today travel demand continues to increase with spread of economic zones. Also, urban freeway plays an important role in intra-zone transportations as a major corridor in a big city. However, most of urban freeways experience a severe congestion with the excess of inflowing or outflowing traffic through freeway ramps. The purpose of this study is to identify the traffic characteristics, analyze the relationships between the traffic characteristics and finally construct the speed predictive models on the ramp junctions of urban freeway under the intelligent transportation system(ITS) settings. From the analyses of traffic characteristics following results were obtained: ⅰ) 24 hours average traffic characteristics flow, occupancy, speed under the ITS settings showed about 40%, 38%, 8.8% increase each on urban freeway junctions period when compared with that under the non-ITS settings each other. Free flow speed and traffic flow on the mainline sections of urban freeway under the ITS settings also showed about 20% and 17% increase when compared with that under the non-ITS, respectively. ⅱ) The upstream when compared speed( $S_{u}$)and downstream occupancy( $O_{d}$) were especially shown to have higher explanatory powers on the stable flow ramp junctions, but the upstream speed( $S_{u}$) and downstream flow( $V_{d}$) were especially shown on the unstable flow ramp junctions of urban freeway under the ITS settings.ngs.ngs.

• Journal of Intelligence and Information Systems
• /
• v.4 no.2
• /
• pp.23-34
• /
• 1998

Travel time forecasting, especially public bus travel time forecasting in urban areas, is a difficult and complex problem which requires a prohibitively large computation time and years of experience. As the network of target area grows with addition of streets and lanes, computational burden of the forecasting systems exponentially increases. Even though the travel time between two neighboring intersections is known a priori, it is still difficult, if not impossible, to compute the travel time between every two intersections. For the reason, previous approaches frequently have oversimplified the transportation network to show feasibilities of the problem solving algorithms. In this paper, forecasting of the travel time between every two intersections is attempted based on travel time data between two neighboring intersections. The time stamps data of public buses which recorded arrival time at predetermined bus stops was extensively collected and forecast. At first, the time stamp data was categorized to eliminate white noise, uncontrollable in forecasting, based on wavelet conversion. Then, the radial basis neural networks was applied to remaining data, which showed relatively accurate results. The success of the attempt was confirmed by the drastically reduced relative error when the nodes between the target intersections increases. In general, as the number of the nodes between target intersections increases, the relative error shows the tendency of sharp increase. The experimental results of the novel approaches, based on wavelet conversion and neural network teaming mechanism, showed the forecasting methodology is very promising.

• Journal of information and communication convergence engineering
• /
• v.3 no.2
• /
• pp.80-83
• /
• 2005

At present, GML becomes the global standard for the XML encoding of geographic information and is the foundation for the Geo-Web. GML is being applied to a wide range of geographic applications including GIS and location-based services, telematics and intelligent transportation systems. In this paper, we propose the tourism information system for supporting the location based service application. We made an effort to design and implement a GIS computing environment by thin client for mobile web mapping service. We are interested in the GML applications that include traditional GIS system for navigation service and location finder for points of interest (POI) services. This paper summarizes the Tourism information system for location based service of a small area (Han-Ok Village with the Korean traditional houses in Jeonju-city), in which moving travelers can obtain proper information services at the current location associated with traditional monuments, cultural products, food, and conveniences. In the paper, we report on the design of the thin client/server system for a mobile environment. This paper is divided into three parts. First, we give a general overview of the organization of the system and of the important concerns of our design. Second we focus on our system supports for location and POI determination, and design concerns. Finally, we show the graphic user interface of PDA, the procedures involved in the service, and the executed results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.927-930
• /
• 2010

Recently, continuous k-nearest neighbor query(CkNN) which is defined as a query to find the nearest points of interest to all the points on a given path is widely used in the LBS(Location Based Service) and ITS(Intelligent Transportation System) applications. It is necessary to acquire results quickly in the above applications and be applicable to spatial network databases. This paper proposes a new method to search nearest POIs(Point Of Interest) for moving query objects on the spatial networks. The method produces a set of split points and their corresponding k-POIs as results. There is no order between the POIs. The analysis show that the proposed method outperforms the existing methods.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.195-213
• /
• 2012

In ubiquitous environments, the Intelligent Transportation System (ITS) protocol is a typical service used to improve the quality of life for humans. The Vehicular Ad-hoc Network (VANET) protocol, a part of ITS, needs further study with regards to its support for high reliability, high speed mobility, data transmission efficiency, and so on. The IEEE 802.11 standard provides a high data rate channel, but it was designed for peer-to-peer network protocols. IEEE 802.11p also provides a high data rate channel, however, it only facilitates communication between roadside and on-board equipment. A VANET has characteristics that enable its topology to change rapidly; it can also be expanded to a multi-hop range network during communication. Therefore, the VANET protocol needs a way to infer the current topology information relating to VANET equipped vehicles. In this paper, we present the Multi-Beacon MAC Protocol, and propose a method to resolve the problem of beacon collisions in VANET through the use of this Multi-Beacon MAC protocol. Evaluation of the performance of Multi-Beacon MAC protocol by means of both mathematical analyses and simulation experiments indicate that the proposed method can effectively reduce beacon collisions and improve the throughput and the delay between vehicles in VANET systems.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.163-169
• /
• 2013

PURPOSES: The urban traffic problems can be defined as general problems for smooth traffic flow including maintenance of mass transportation system according to suddenly increased population, traffic regulations for vehicles and pollution problem. As a method for solving traffic jams, one of the traffic problems of late, interest in Intelligent Traffic System(ITS) is increasing sharply, which is a system managing traffic demand by providing passers with information on traffic state of path and road conditions before they pass the road through ATIS, a field of ITS. METHODS: Variable message signs(VMS) is used on the roads as a method for providing information to promote smooth traffic flow and safety and prevent traffic accidents in advance by providing drivers with various information while driving. RESULTS: Recently, as ITS industry has been vitalized and technical factors of VMS have developed, various kinds of information is provided but the effect of VMS has not been maximized due to its limited type. CONCLUSIONS: Therefore, this study intends to provide methods for effective information transfer by analyzing driver's visual behavior characteristics for VMS and presenting a basis for maximizing VMS effect after considering read by expression type.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3965-3983
• /
• 2017

We propose a novel eye tracking method that can estimate 3D world coordinates using an infrared (IR) stereo camera for indoor and outdoor environments. This method first detects dark evidences such as eyes, eyebrows and mouths by fast multi-level thresholding. Among these evidences, eye pair evidences are detected by evidential reasoning and geometrical rules. For robust accuracy, two classifiers based on multiple layer perceptron (MLP) using gradient local binary patterns (GLBPs) verify whether the detected evidences are real eye pairs or not. Finally, the 3D world coordinates of detected eyes are calculated by region-based stereo matching. Compared with other eye detection methods, the proposed method can detect the eyes of people wearing sunglasses due to the use of the IR spectrum. Especially, when people are in dark environments such as driving at nighttime, driving in an indoor carpark, or passing through a tunnel, human eyes can be robustly detected because we use active IR illuminators. In the experimental results, it is shown that the proposed method can detect eye pairs with high performance in real-time under variable illumination conditions. Therefore, the proposed method can contribute to human-computer interactions (HCIs) and intelligent transportation systems (ITSs) applications such as gaze tracking, windshield head-up display and drowsiness detection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.253-263
• /
• 2021

Traffic data collected using advanced equipment are highly valuable for traffic planning and efficient road operation. However, there is a problem regarding the reliability of the analysis results due to equipment defects, errors in the data aggregation process, and missing data. Unlike other detectors installed for each vehicle lane, radar detectors can yield different error types because they detect all traffic volume in multilane two-way roads via a single installation external to the roadway. For the traffic data of a radar detector to be representative of reliable data, the error factors of the radar detector must be analyzed. This study presents a field survey of variables that may cause errors in traffic volume collection by targeting the points where radar detectors are installed. Video traffic data are used to determine the errors in traffic measured by a radar detector. This study establishes three types of radar detector traffic errors, i.e., artificial, mechanical, and complex errors. Among these types, it is difficult to determine the cause of the errors due to several complex factors. To solve this problem, this study developed a radar detector traffic volume error analysis model using a multiple linear regression model. The results indicate that the characteristics of the detector, road facilities, geometry, and other traffic environment factors affect errors in traffic volume detection.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.751-756
• /
• 2018

This research extracted traffic light from input video, recognized colors of traffic light, and suggested traffic light color recognizing algorithm applicable to manless autonomous vehicle or ITS by distinguishing signs. To extract traffic light, suggested algorithm extracted the outline with CEA(Canny Edge Algorithm), and applied HCT(Hough Circle Transform) to recognize colors of traffic light and improve the accuracy. The suggested method was applied to the video of stream acquired on the road. As a result, excellent rate of traffic light recognition was confirmed. Especially, ROI including traffic light in input video was distinguished and computing time could be reduced. In even area similar to traffic light, circle was not extracted or V value is low in HSV space, so it's failed in candidate area. So, accuracy of recognition rate could be improved.