• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2002

There are many problems of interoperability between ITS system equipments since the protocol standard for a network center and a node has not defined. In this paper, we consider the use of the SNMP to solve the interoperability problem, and apply the SNMP in the case of a CCTV as an example. Also, we defined its corresponding MIBs and accomplished the interoperability test, where the method of controlling the CCTV is explained and the data transmitted on the network are shown in a hexadecimal format. Our results are expected to be helpful for a guideline or feasibility test as nationwide data to support the interoperability of ITS systems between a network center and nodes.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.342-347
• /
• 2003

It is essential to develop an algorithm for the estimate of link travel velocity and for the supply and control of travel information in the context of intelligent transportation information system. The paper proposes the fuzzy logic based prediction of link travel velocity. Three factors such as time, date and velocity are considered as major components to represent the travel situation. In the fuzzy modeling, those factors were expressed by fuzzy membership functions. We acquire position／velocity data through GPS antenna with PDA embedded probe vehicles. The link travel velocity is calculated using refined GPS data and the prediction results are compared with actual data for its accuracy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.10-18
• /
• 2012

This paper develops a decentralized advanced traveler information system (ATIS) under the connected vehicle environment, recently regarded as one of most promising tools in Intelligent Transportation Systems (ITS). The performance of the proposed ATIS is reinforced by introducing autonomous automatic incident detection (AAID) function. The proposed ATIS is implemented and tested using an off-the-shelf microscopic simulation model (VISSIM) on a simple traffic network under idealized communication conditions. A key attribute of this experiment is the inclusion of a non-recurrent traffic state (i.e., traffic incident). Simulation results indicate that the ATIS using V2V communication is efficient in saving drivers' travel time and AAID plays an important role in improving the effectiveness of the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.34-52
• /
• 2019

This paper proposes an intelligent system performing an application with assistance of an Internet of Things (IoT) platform to control a traffic lights system. In our proposed systems, the traffic lights can be remotely controlled through the Internet. Based on IoT platform, the traffic conditions at different intersections of roads are collected and the traffic lights are controlled in a central manner. For the software part, the algorithm is designed based on the green wave theory to maximize the green bandwidth of arterial roads while addressing a challenging issue: the rapid changes of parameters including cycle time, splits, offset, non-fixed vehicles' velocities and traffic flow along arterial roads. The issue typically happens at some areas where the transportation system is not well organized like in Vietnam. For the hardware part, PLC S7-1200 are placed at the intersections for two purposes: to control traffic lights and to collect the parameters and transmit to a host machine at the operation center. For the communication part, the TCP/IP protocol can be done using a Profinet port embedded in the PLC. Some graphical user interface captures are also presented to illustrate the operation of our proposed system.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.457-463
• /
• 2009

The earthwork is essential procedure for all civil engineering projects. Because of its importance in terms of cost and time, it should be managed effectively. In light of this, The Intelligent Excavating System (IES) research consortium has established to improve the productivity, quality and safety of current excavating/earthwork system by the Ministry of Land, Transportation and Maritime Affairs (MLTM) of Korea. This paper summarizes ongoing research aimed at development knowledge and presents a framework of task planning and visualization system for IES. The task planning and visualization system consists of three functions. 1) Using digital terrain model which created by 3D laser scanner, the system can divide it and generates global/local work area so that the excavator can work through the area. 2) In order to operate and/or control the excavator, the system exports the location, paths of boom, arm and bucket data of the excavator to control center. 3) The task planning system is visualized on the computer programming aided-graphic interface which simulates the planned work processes and eventually assists the operator for the control of the excavator. The case study which we have performed, demonstrates the effectiveness of the proposed system.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.43-55
• /
• 2012

Bicycle is an environment-friendly transport mode contributing to a more sustainable transportation systems. To innovatively increase the use of bicycle as a significant transport mode, bicycle-friendly roadway environment should be provided. This study proposes a method to evaluate cycling environment based on the analysis of data collected from an specially equipped probe bicycle. The inertial measurement unit(IMU) consisting of a gyro sensor, accelerometer, and a global positioning systems(GPS) receiver was installed on the probe bicycle. Cycling stability index(CSI) and bicycle speed data were used as inputs of the proposed evaluation framework adopting the Fault Tree Analysis, which is a well-known technique for the risk analysis. The outcomes of this study will serve as an intelligent assesment tool for cycling environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.225-231
• /
• 2013

A bird's-eye view is an elevated view of an object from above, with a perspective as though the observer were a bird, often used in the making of blueprints, floor plans and maps. It can be used under severe weather conditions when visibility is poor. Under low visibility environments, drivers can communicate each other using V2V communication to get each vehicle's status to prevent collision and other accidents. Ubiquitous transportation sensor networks(u-TSN) and its application are emerging rapidly as an exciting new paradigm to provide reliable and comfortable transportatione services. The ever-growing u-TSN and its application will provide an intelligent and ubiquitous communication and network technology for traffic safety area.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.417-429
• /
• 2015

Evaluation of traffic data quality is a backbone of better traffic information and management systems because it directly affects the reliability of traffic information. This study developed an integrated index for evaluating the quality of archived intelligent transportation systems (ITS) data. Two novel indices including spatio-temporal consistency and severity of missing data were devised and integrated with existing indices such as availability and completeness. An evaluation framework was proposed based on the developed integrated index. Both analytical hierarchical analysis (AHP) technique and entropy method were adopted to derive mixed weighting values to be used for the integrated index. It is expected that the proposed methodology would be effectively used in enhancing the quality of traffic data as a part of traffic information system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.38-48
• /
• 2017

Link attributes, such as speed, occupancy, and flow, are essential factors for transportation planning and operation. It is, therefore, one of the most important decision-making problems in intelligent transport system (ITS) to determine the optimal location of a sensor for collecting the information on link attributes. This paper aims to develop a model to determine the optimal location of a sensor to minimize the variability of traffic information on whole networks. To achieve this, a network sensor location model (NSLM) is developed to reflect discrete characteristics of data collection. The variability indices of traffic information are calculated based on the summation of diagonal elements of the variance-covariance matrix. To assess the applicability of the developed model, speed data collected from the dedicated short range communication (DSRC) systems were used in Daegu metropolitan area. The developed model in this study contributes to the enhancement of investment efficiency and the improvement of information accuracy in intelligent transport system (ITS).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.