• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.45-58
• /
• 2001

Subjective mental workload assessment technique becomes a standard human factors and human-machine interface evaluation tool for the evaluation of ITS(Intelligent Transport Systems)-oriented information systems as well as the drivers visual activity analysis, physiological indices(GSR, EEG, ECG, etc.), secondary task performance, reaction time. vehicle control parameters(speed, steering behavior, accelerator control) that are widely applied for transportation and vehicle systems to evaluate the safety, to decide the system or design alternatives, and to establish the design guidelines. This paper reviewed and compared the most globally employed four mental workload assessment techniques that have been designed for the use of various human-machine systems and ITS-oriented in-vehicle information systems. NASA-TLX(National Aeronautics and Space Administration-Task Load Index). SWAT(Subjective Workload Assessment Technique), MCH(Modified Cooper-Harper) scale, and recently developed RNASA-TLX(Revision of NASA-TH) were compared in terms of sensitivity and subjective evaluations to derive the human-machine interface evaluation guidelines for the application of ITS-oriented in-vehicle information systems. Then, experiment results supported that RNASA-TLX is the prospective tool for the mental workload assessment of ITS-oriented in-vehicle information systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.128-139
• /
• 2017

Railway is one of the public transportation systems along with shipping and aviation. With the recent introduction of high speed train, its proportion is increasing rapidly, which results in the higher risk of catastrophic failures. The wheel bearing to support the train is one of the important components requiring higher reliability and safety in this aspect. Recently, many studies have been made under the name of prognostics and health management (PHM), for the purpose of fault diagnosis and failure prognosis of the bearing under operation. Among them, the most important step is to extract a feature that represents the fault status properly and is useful for accurate remaining life prediction. However, the conventional features have shown some limitations that make them less useful since they fluctuate over time even after the signal de-noising or do not show a distinct pattern of degradation which lack the monotonic trend over the cycles. In this study, a new method for feature extraction is proposed based on the observation of relative frequency energy shifting over the cycles, which is then converted into the feature using the information entropy. In order to demonstrate the method, traditional and new features are generated and compared using the bearing data named FEMTO which was provided by the FEMTO-ST institute for IEEE 2012 PHM Data Challenge competition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.36-49
• /
• 2016

A subway system is one of the major transportation modes at a metropolitan area. When it meets the other lines, the metro station, so-called transferring station, is usually threatened by severe pedestrian congestion and safety issue of transit users including the transportation vulnerable. Although transportation planners forecast travel demand at the beginning, it is not easy to predict pedestrian flows precisely for a long term if land use plans have dramatically changed. Due to expensive costs, structural extension of metro stations is limited. Therefore, it requires efficient and technical improvements as meeting the demand of pedestrian and physical characteristics. In this study, the core mechanism of pedestrian movement-based simulation model was introduced and evacuation scenarios were analyzed with the developed model. As a result, the multiple optimal routes for unexpected events at the solid space of the multiple stories are easily searched through the simulator and in the case of Sadang Station, travel time can be reduced by 60% when the evacuation information and intuitive design are provided.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.73-85
• /
• 2014

Approaching to aging society with increasing transportation vulnerable, most developed countries has positively promote low-floor bus. Such circumstance in Korea has plan to introduce low-floor bus to intra-city bus system which accounted for 30 percent of total number of buses however there is no specific operating plan for this matter. According to the revealed preference study on bus service, the study shows that the efficiency of low-floor is relatively low than that of other buses, therefore, it is necessary to establish feasible plan for bus route selection. Thus, this study is to conduct research on analyzing trip characteristics of transportation vulnerable and establish bus route selection measures for low-floor bus. The result from the survey in Jeollabuk-do Province reveals that the trip purpose of transportation vulnerable is mainly for welfare and medical service, which was made less than 6 times a week. Futhermore, 37.6 percent of transportation vulnerable use buses, thus, it is essential to improve its service quality for enhancing user's convenience and safety. In that transportation vulnerable O-D needs to be established and forecasts future demand for selecting optimal bus route. According to the estimation, route passing through densely populated areas with transportation vulnerable should take the first priority, city circular and other route would be next. Moreover, it is economically efficient that areas populated more than 200,000 with fixed route and less than 200,000 with limited route responsive to demands would be feasible plans. This study will have greater an impact on transportation planning and further research on transportation vulnerable.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.43-57
• /
• 2021

The Forward Collision Warning, a representative technology of the Advanced Driver Assistance Systems, was selected as the target technology. The cognitive response time, deceleration, and impact were selected as the measures of effectiveness. And the amount of change with and without the Forward Collision Warning was measured. The experimental scenarios included a sudden stop event (1) of the vehicle in front of the driver and an event (2) in which the vehicle intervened in the next lane. All experiments were divided into day and night. As a result of the analysis, response time and the deceleration rate decreased when the forward collision warning system was installed. It was analyzed that the driver's risk situation could be detected quickly and the number of front-end collisions could be reduced as a result. Reflecting the driver's operating habits and diversifying the experimental scenarios will increase the installation effectiveness of ADAS and be used to estimate the effectiveness of other technologies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.100-118
• /
• 2021

In this study, PM accidents (1,603case) and bicycle accidents (14,672case) that occurred in the last three years were analyzed to determine the characteristics of PM traffic accidents. In particular, PM traffic accidents were divided into perpetrators and victims to determine the characteristics in detail. For PM accidents, the analysis was conducted on the status of each road grade, road type, weather condition, accident type, day and night occurrence, and vehicle type. The number of PM accidents that occurred in 2019 increased by 129%, and deaths increased by more than 200% compared to the previous year. The proportion of pedestrian accidents among PM traffic accidents was higher than that of bicycle accidents. Therefore, regulations on PM traffic are necessary. For the 20 deaths of PM, a detailed analysis was conducted to analyze the factors of traffic accidents. PM fatalities occurred in 50% of vehicle accidents, and 7 out of 10 vehicle accidents occurred at night. This is believed to have been caused by falling or overturning due to an obstacle, such as a depression in the road pavement or a speed bump.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.62-73
• /
• 2022

As the competition among the autonomous vehicle (AV, here after) developers are getting fierce, Korean government has been supporting developers by deregulating safety standards and providing financial subsidies. Recently, some OEMs announced their plans to market Lv3 and Lv4 automated driving systems. However, these market changes raised concern among public road management sectors for monitoring road conditions and alleviating hazardous conditions for AVs and human drivers. In this regards, the authors proposed a methodology for monitoring road infrastructure to identify hazardous factors for AVs and categorizing the hazards based on their level of impact. To evaluate the degrees of the harm on AVs, the authors suggested a methodology for managing road hazard factors based on vehicle performance features including vehicle body, sensors, and algorithms. Furthermore, they proposed a method providing AVs and road management authorities with potential risk information on road by delivering them on the monitoring map with node and link structure.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.99-111
• /
• 2021

The connected farm that agricultural land, agricultural machinery and farmer are connected with an IoT gateway is in the commercialization stage. That has increased productivity, efficiency and profitability by intimate information exchange among those. In order to develop the educational program of intelligent agricultural machinery and the agricultural machinery safety education performance indicator, this study analyzed patent trends of agricultural machine with unmanned technology used in agriculture and efficiency technology applied advanced technologies such as ICT, robots and artificial intelligence. We investigated and analyzed patent trends in agricultural machinery of Korea, the USA and Japan as well as the countries in Europe. The United States is an advanced country in the field of unmanned technology and efficiency technology used in agriculture. Agricultural automation technology in Korea is insufficient compared to developed countries, which means rapid technological development is needed. In the sub-fields of field automation technology, path generation and following technology and working machine control technology through environmental awareness have activated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.209-220
• /
• 2022

With the worldwide spread of African swine fever, interest in livestock epidemics has increased. Livestock transport vehicles are the main cause of the spread of livestock epidemics, but there are no empirical quarantine procedures and standards related to the mobility of livestock transport vehicles in South Korea. This study extracted the trajectory of livestock-related vehicles using the facility-visit history data from the Korea Animal Health Integrated System and the DTG (Digital Tachograph) data from the Korea Transportation Safety Authority. The results are presented as exposure indices aggregating the link-time occupancy of each vehicle. As a result, 274,519 livestock-related vehicle trajectories were extracted, and the exposure values by link and zone were derived quantitatively. This study highlights the need for prior monitoring of livestock transport vehicles and the establishment of post-disaster prevention policies.

• Design Convergence Study
• /
• v.15 no.1
• /
• pp.135-150
• /
• 2016

Due to the development of communication technology and expansion of Intelligent Transport System (ITS), the car is changing from a simple mechanical device to second living space which has comprehensive convenience function and is evolved into the platform which is playing as an interface for this role. As the interface area to provide various information to the passenger is being expanded, the research importance about smart car based user experience is rising. This study has a research objective to propose the guidelines regarding the smart car user experience elements. In order to conduct this study, smart car user experience elements were defined as function, interaction, and surface and through the discussions of UX/UI experts, 8 representative techniques, 14 representative techniques, and 8 locations of the glass windows were specified for each element. Following, the smart car users' priorities of the experience elements, which were defined through targeting 100 drivers, were analyzed in the form of questionnaire survey. The analysis showed that the users' priorities in applying the main techniques were in the order of safety, distance, and sensibility. The priorities of the production method were in the order of voice recognition, touch, gesture, physical button, and eye tracking. Furthermore, regarding the glass window locations, users prioritized the front of the driver's seat to the back. According to the demographic analysis on gender, there were no significant differences except for two functions. Therefore this showed that the guidelines of male and female can be commonly applied. Through user requirement analysis about individual elements, this study provides the guides about the requirement in each element to be applied to commercialized product with priority.