• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.155-158
• /
• 2007

Printed organic thin-film transistor(OTFT) to use as a switching device for an organic light emitting diode(OLED) were fabricated in the microcontact printing and direct printing processes at room temperature. The gate electrodes($5{\mu}m$, $10{\mu}m$, and $20{\mu}m$) of OTFT was fabricated using microcontact printing process, and source/drain electrodes ($W/L=500{\mu}m/5{\mu}m$, $500{\mu}m/10{\mu}m$, and $500{\mu}m/20{\mu}m$) was fabricated using direct printing process with hard poly(dimethylsiloxane)(h-PDMS) stamp. Printed OTFT with dielectric layer was formed using special coating system and organic semiconductor layer was ink-jet printing process. Microcontact printing and direct printing processes using h-PDMS stamp made it possible to fabricate printed OTFT with channel lengths down to $5{\mu}m$, and reduced the process by 20 steps compared with photolithography. As results of measuring he transfer characteristics and output characteristics of OTFT fabricated with the printing process, the field effect characteristic was verified.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.502-505
• /
• 2011

본 논문에서는 컨테이너화물 안전수송에 사용되는 ConTracer에 활용할 2.45GHz 및 GPS 통합 안테나 보드를 설계하고자 한다. 설계된 통합 안테나 보드는 컨테이너 도어에 적용하고자 컨테이너 도어에 해당되는 모형 모델링하여 철재물에 대한 RF 영향에 대해 시뮬레이션하여 그 결과를 반영하여 2.45GHz 안테나 보드를 설계하였으며 GPS 안테나는 세라믹 재질로 제작하였다. 적용하는 ConTracer라는 것은 각 컨테이너화물의 정보를 거점별 리더기로 서버측에 전송하는 장비로서, 항만 물류산업에 크게 활용되는 장치이다. 이 ConTracer 장비에 사용되는 2.45GHz 및 GPS 안테나 보드는 컨테이너 환경에 초점을 맞춰 설계할 필요가 있으며 컨테이너 재질(전부금속), 컨테이너에 실장되는 RF 모듈단의 크기와 접지를 모두 고려한 통합 안테나 보드 설계가 필요하다. 따라서 본 논문은 컨테이너 도어 부분만 모델링하여 최적의 안테나 파라미터들의 성능이 구현될 수 있도록 2.45GHz 안테나 보드를 제작하고 세라믹 재질로 GPS 안테나를 제작하여 그 특성을 측정하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.203-211
• /
• 1998

ER clutch is a device using electro-rheological fluid which is one of so called intelligent materials. Power transmission behavior of an ER clutch can be controlled by electrical field applied tb the fluid. In this work, a new type of servomechanism is developed with two ER clutchs, driven by two electrical motors rotating in reverse directions. The concentric cylinder type ER clutch is operated by PID control. The system shows good angular position control characteristics with respect to sinusoidal and square inputs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.183-184
• /
• 2005

In this paper. a new small size Lateral Trench Electrode Power IGBT is proposed. The entire electrode of proposed LIGBT is placed in trench oxide. The forward blocking voltage of the proposed LIGBT is improved by 1.6 times with that of the conventional LIGBT. The forward blocking voltage of proposed LIGBT is 500V. At the same size. a increase of the forward blocking voltage of about 1.6 times relative to the conventional LIGBT is observed by using TMA-MEDICI which is used for analyzing device characteristics. Because the electrodes of the proposed device are formed in trench oxide. the electric field in the device are crowded to trench oxide. We observed that the characteristics of i the proposed device was improved by using TMA-MEDICI and that the fabrication of the proposed device is possible by using TMA-TSUPREM4.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권2호
• /
• pp.119-124
• /
• 2016

According to the expansion of smartphone penetration and development of wearable device, personal context information can be easily collected. To use this information, the context aware recommender system has been actively studied. The key issue in this field is how to deal with the context information, as users are influenced by different contexts while rating items. But measuring the similarity among contexts is not a trivial task. To solve this problem, we propose context aware post-filtering to apply the context compensation. To be specific, we calculate the compensation for different context information by measuring their average. After reflecting the compensation of the rating data, the mechanism recommends the items to the user. Based on the item recommendation list, we recover the rating score considering the context information. To verify the effectiveness of the proposed method, we use the real movie rating dataset. Experimental evaluation shows that our proposed method outperforms several state-of-the-art approaches.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.53-64
• /
• 2022

This study proposes an intelligent semi-active isolation system combining a variable-stiffness control device and ground motion characteristic prediction. To determine the optimal control parameter in real-time, a genetic algorithm (GA)-fuzzy control law was developed in this study. Data on various types of ground motions were collected, and the ground motion characteristics were quantified to derive a near-fault (NF) characteristic ratio by employing an on-site earthquake early warning system. On the basis of the peak ground acceleration (PGA) and the derived NF ratio, a fuzzy inference system (FIS) was developed. The control parameters were optimized using a GA. To support continuity under near-fault and far-field ground motions, the optimal control parameter was linked with the predicted PGA and NF ratio through the FIS. The GA-fuzzy law was then compared with other control laws to verify its effectiveness. The results revealed that the GA-fuzzy control law could reliably predict different ground motion characteristics for real-time control because of the high sensitivity of its control parameter to the ground motion characteristics. Even under near-fault and far-field ground motions, the GA-fuzzy control law outperformed the FPEEA control law in terms of controlling the isolation layer displacement and the superstructure acceleration.

• 한국ITS학회 논문지
• /
• 제15권1호
• /
• pp.87-94
• /
• 2016

육상에서의 전자파 환경에 대한 연구는 지속적인 투자와 연구가 이루어지고 있지만 해상의 환경인 선박의 전자파 환경에 관한 시험 및 분석은 연구되어 지지 않는 실정이다. 선박은 최상층 갑판구역, 선교, 기관실로 구성되어있다. 최상층갑판구역은 안테나 및 레이더가 탑재되어 있다. 선교는 안전한 항해를 위한 항해장비가 탑재되어있다. 마지막으로 기관실에서는 선박의 추진시스템에 사용되는 배전반이 탑재되어있다. 따라서 본 연구는 선박이라는 특정 공간에서의 전자파 환경을 분석 후 해상환경에 적용 가능한 최적 기준을 제안하는 것을 목적으로 한다. 이를 위해 국내외 전자파 기준을 활용하여 실선 한국해양대학교 실습선 한바다 호를 측정 후 측정결과를 국내 기준, 이탈리아 기준과 분석하여 선박의 기관실에 대한 국내 기준 적용에 한계가 있음을 확인하였다. 본 연구의 결과는 추후 선박의 전자파 인체 보호 기준 정립을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제11권4호
• /
• pp.34-50
• /
• 2012

본 연구는 국내 ITS 분야 센터와 노변간 통신의 상호 운영성 및 호환성과 국제경쟁력을 확보하기 위해 국내 도입이 필요한 ITS 센터와 노변간 통신환경에 대한 정의와, 이의 도입을 위한 기술적/정책적 방안을 수립하고 정보교환 에뮬레이터를 개발하여 VMS를 시범적용 함으로써 이에 대한 유효성을 검증하였다. 먼저, 국내 도입이 필요한 ITS 센터와 노변간 정보교환 표준 환경은 DATEX와 SNMP 듀얼 프로토콜로 정의하고, 메타속성 정의, OID 도입 등 메시지 정의 체계에 대해 제시하였다. 도입을 위한 기술적/정책적 방안으로는 표준도입 시범사업을 통한 Feed-back으로 충분한 실효성 확보, 표준에 대한 교육/홍보 선행, ITS 분야 OID 도입 및 체계적인 관리방법, 정보교환 표준규격에 적합한 하드웨어 표준 규격의 개발, 듀얼프로토콜 도입을 위한 통합관리시스템 구축이 필요함을 제시하였다.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.27-38
• /
• 1997

ER clutch is a device using ER fluid, so called "intelligent material" and is a power transmission system controlled with electric field strength. This device responses very rapidly when controlled by rapid and continuous electrical signal and can form a servosystem. Wear, noise and vibration during operation is very low level. This study was undertaken to investigate substitutive possibilities of this ER clutch for existing power transmission mechanism. An analytic relationships using rheological model (so called, 'Bingham plastic model') of ER fluid were developed, and operation constraints and optimum design concepts were constructed. With this relationships, typical responses of ER clutch and effects of changing geometric, kinetic parameters of ER clutch and ER fluid properties were described. In conclusion, compared with existing mechanisms, an excellent performance of ER clutch was confirmed.confirmed.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.60-65
• /
• 2001

Lateral type poly-silicon field emitters were fabricated by utilizing the LOCOS (Local Oxidation of Silicon) process. For the implementation 'of an ideal field emission device with quasi-zero tunneling barrier, a new and fundamental approach has used conducted by introducing an intelligent carbon-based thin layer on the cathode tip surface via a field-assisted self-aligning of carbon (FASAC) process. Fundamental lowering of the turn-on field for the electron emission was feasible through the control of both the tip shape and surface barrier height.