• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권2호
• /
• pp.105-119
• /
• 2012

In this paper, we have proposed a methodology which can make effective test for system integration of complex guided missile system. System integration test play a significant role in the development of weapon system, providing the means to detect and isolate faults on first linkage between sub-systems. Integration tests for domestic weapon system has executed not a technology-intensive method based on tool but labor-intensive method based on experience. Higher cost, longer period, and more resource are required to execute system integration test for complex guided missile system comparing with past weapon systems, because recently weapon systems have more complex and more networked functions. Because the proposed design method for system integration test decreases number of test case, it lead to a decrease of cost, period, and resource for integration test of weapon system. The proposed configuration for system integration test will ensure reliability through detection and isolation of fault on linkage between sub-systems.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.666-673
• /
• 2011

최신항공기 개발에서 증가추세에 있는 항공전자 장비들의 효율적인 통합시험 수행을 위 해 통합시험환경구축이 중요한 역할을 하고 있다. 특히 개발기간 최소화 및 신뢰성과 신속한 통합시험수행을 위해 통합시험장비 개발이 필수적이다. 본 논문에서는 수리온(KUH) 임무탑재장비(MEP)의 각 장비별 특성을 분석 후 최적의 통합시험 수행을 위한 장비별 모델개발을 다루었다. 모델은 동작특성에 따라 동적(Dynamic), 행동(Behavior), 연동(ICD) 모델로 구분하였으며 장비의 고장탐구 및 미장착된 장비의 동작특성 모사가 모델링의 주목적이다. 모델은 소프트웨어 단위시험 및 체계 통합시험 두 단계로 나누어 객관적 신뢰성을 검증하였다. 수리온 MEP 통합시험장비(SIL)를 이용하여 개발된 모델을 통합시험에 적용한 결과 설계 목적에 부합됨을 확인하였다.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.40-47
• /
• 2019

본 논문은 무인항공기 체계(UAS; unmanned aerial system)의 비행체 탑재장비 및 지상에서 운용하는 장비의 연동 검증을 위한 체계통합실험실(SIL; system integration laboratory) 및 체계통합시험(SIT; system integration test)의 환경 구축 및 이를 통한 검증방법에 대하여 다룬다. SIL 내 구축된 지상통제체계, 데이터링크체계, 비행체 탑재장비, 임무장비(EO/IR, SAR) 등과 같은 부체계간의 인터페이스 환경 및 모의 비행을 통한 체계 운용로직의 검증방법과 실험실 레벨에서의 검증이 완료된 각 부체계를 실제 시험 환경에서 검증하는 방법에 대해 기술한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.145-151
• /
• 2021

According to the Korea Augmentation Satellite System (KASS) system milestone, Site Acceptance Test (SAT) has three steps test until the end of the project. SAT#1 is the first time of SAT steps and verify the KASS Reference Station (KRS) and Sub System (S/S) for the monitoring and controllable. After the equipment and software were installed at the Mission Control Center (MCC) with Central Monitoring and Control Simulator (CMS) for the SAT#1, the 1:1 test was progressed when the KRS and S/S are ready to test. SAT#1 has a 10 steps test case and it was progressed each KRS sites. The test was finished throughout the real-time monitoring and the data collection including the data analysis all of the 7 KRS sites. Finally SAT#1 was completed on December 2020 with successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.974-977
• /
• 2003

The GPS/INS integration system navigation can provide improved navigation performance and has been widely used as a main navigation system for military and commercial vehicles. When two navigation systems are tightly coupled and the structure is complicated, a fault in either the GPS or the INS can lead to a disastrous failure of the whole integration system. This paper proposes a real-time fault detection method for an AGPS/INS integration system. The proposed fault detection method comprises a BIT and a fault detection algorithm based on chi-square test. It is implemented by real-time software modules to apply the AGPS/INS integration system and van test is carried out to evaluate its performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

Testing evaluation is a part of process for design, production, evaluation, operation and abolition, and is the process of certifying system performance. The main purpose of testing evaluation is to reduce the risk factor under the determining process. Testing process has the three step such as design qualification, integration and validation test in factory, system integration and commissioning test. Design Qualification is to verify errors on the design process. Integration and validation test in factory is for the H/W and S/W of an equipment and is to verify interface of subsystem, communication protocol and main functions. System integration and commissioning test is a functional test to adjust successful installation of equipment. According to the testing process, briefly consideration for test item, test method and test contents about signalling system is carried out.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.290-302
• /
• 2011

이번 연구의 목적은 전정 중심의 감각통합치료가 발달장애아동의 안구진탕, 시지각, 균형능력에 미치는영향을 알아보기 위해서이다. 발달장애를 가진 23명의 아동이 이번 실험에 참여하였다. 대상은 12주동안 Ayres의 감각통합이론에 바탕을 둔 전정중심의 감각통합치료를 받았다. 치료 효과는 SCPNT, DTVP-2, P-CTSIB, SCSIT등과 BOT의 일부 평가항목을 사용하였다. 수집된 데이터는 Wilcoxon test를 사용하여 분석되었다. 연구결과는 회전후 안구진탕 측정에서 유의한 증가를 보였다. 시지각과 균형능력의 측정결과에서도 유의한 증가를 나타내었다. 따라서 전정중심의 감각통합치료가 발달장애를 가진 아동에서 안진, 시지각, 균형능력의 증진에 효과적이었다.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• 수산경영론집
• /
• 제44권1호
• /
• pp.71-79
• /
• 2013

This study is aimed to estimate market integration of wild caught fish species on the Korean market, using both multivariate and bivariate cointegration analysis. For the analysis of market integration between wild caught fish species, major four fish species those are most popular fish in the market and caught by the large purse seine fishery-chub mackerel, jack mackerel, hairtail and spanish mackerel-were selected as analytical target fish species. And their real monthly price data from January 2000 to December 2011 were used in the analysis. The results of the multivariate cointegration test for four wild caught fish species showed that there would be long-term equilibrium relationships among prices of four wild caught fish species, and consequently, the markets for wild caught fish species were estimated to be integrated. The results of exclusion test and bivariate cointegration test also supported that there would be a clear evidence to suggest that all target wild caught fish species were cointegrated each other.