• 한국안광학회지
• /
• 제2권1호
• /
• pp.91-95
• /
• 1997

균일하지 않게 코팅된 적분구의 효율성에 대한 일반적인 방정식이 제시되었다. 제시한 가정은 적분구 내부는 완전한 구형이고 모든 구내벽은 입사된 광선에 대해 완전하게 확산적으로 반사한다는 것이다. 제시한 방정식을 절대반사율 측정과 반구 반사율 측정이 혼합된 적분구에 대해서 기본적인 응용성을 시험하였다.

• 한국광학회지
• /
• 제34권5호
• /
• pp.202-209
• /
• 2023

절대복사온도계의 분광 복사 휘도 감응도를 교정하기 위해 압축된 polytetrafluoroethylene (PTFE)과 반사봉을 사용하여 높은 공간 복사 휘도 분포를 가진 KRISS형 소형 적분구를 제작하였다. 이 적분구의 공간 복사 휘도 균일도는 ±0.009%로 지금까지 국외 표준기관들이 보고한 최고값보다 5배 높았다. 또한, 상용 제품인 소결된 PTFE 적분구의 공간 복사 휘도 균일도를 10배 향상시켰다.

• Journal of the Optical Society of Korea
• /
• 제20권4호
• /
• pp.500-509
• /
• 2016

Integrating spheres play a central role in the radiometric calibration of remote sensors. With the development of the wide field of view (FOV) remote sensors, aperture diameters of remote sensors are becoming larger and larger. To satisfy the radiometric calibration requirements of full FOV and full aperture, an 8000mm diameter large aperture integrating sphere uniform source with a variable exit port was designed and manufactured. This integrating sphere will be used for pre-launch test and radiometric calibration of remote satellites. In this paper, optical theories were used to design the output spectral radiance. The LightTools software based on ray-tracing simulation method was used to determine the best combination and distribution of inner light sources. A spectral experiment was made to verify the spectral radiance design. To reduce the influence of longtime power-on, a new characteristic measurement method was developed to obtain the radiation characteristic of the integrating sphere, which could greatly improve the measuring efficiency. This method could also be applied to measure other large aperture uniform sources. The obtained results indicate that the spatial uniformity is 98.35%, and the angular uniformity at center position is 98.78%.

• 한국광학회지
• /
• 제35권2호
• /
• pp.61-70
• /
• 2024

400 nm부터 1,600 nm까지의 파장 영역에서 단일모드 광섬유에 결합된 12개의 다이오드 레이저 광원를 기반으로 하는 레이저 복사출력계 교정시스템을 소개한다. 본 시스템은 복사출력 측정위치에서 레이저 출력요동을 최소화하였고 모든 광원에 대해 비슷한 빔 크기를 갖는다. 또한 감응도의 비균일도 및 비선형성을 최소화하기 위해 적분구 기준기를 사용하였다. 이 교정시스템의 최소 측정불확도는 대부분의 레이저 파장에서 1.1% (k=2)로 추정된다.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.270-277
• /
• 2011

Laser cartilage reshaping(LCR) is a promising method for reshaping cartilage by using laser irradiation to maintain permanently modifies its shape. However this method has not been fully understood due to the limited scientific researches. The purpose of this study is to analyze optical and thermal characteristics of cartilage during laser irradiation. After analyzing Monte Carlo simulation for the comparison of laser fluence distributions with different laser wavelengths the characterization of the spectral changes during Nd:YAG laser(${\lambda}$ = 1444 nm) irradiation was investigated in the ranges of 900-1700 nm with double integrating spheres. The surface temperature distribution changes during laser irradiation were investigated with an infrared camera. The quantitative measurements of optical and thermal characteristics in cartilage after laser irradiation were correlated with the transition of water flux(from bound to free water) and this study may be useful for better understanding of biophysical transformation phenomena in cartilage after laser heating.