• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.380-388
• /
• 2017

Since the carrier sequence is not reproducible in a period of the random carrier pulse width modulation (RCPWM) and a higher harmonic spectrum amplitude is likely to affect the quality of the power supply. In addition, electromagnetic interference (EMI) and mechanical vibration will appear. To solve these problems, this paper has proposed an optimal RCPWM based on a genetic algorithm (GA). In the optimal modulation, the range of the random carrier frequency is taken as a constraint and the reciprocal of the maximum harmonic spectrum amplitude is used as a fitness function to decrease the EMI and mechanical vibration caused by the harmonics concentrated at the carrier frequency and its multiples. Since the problems of the hardware make it difficult to use in practical engineering, this paper has presented a hardware system. Simulations and experiments show that the RCPWM is effective. Studies show that the harmonic spectrum is distributed more uniformly in the frequency domain and that there is no obvious peak in the wave spectra. The proposed method is of great value to research on RCPWM and integrated power systems (IPS).

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.61-69
• /
• 2011

Integrated stream naturalness based on abiotic and biotic factors were developed. Abiotic factors considered in this study were types of land use in the riparian area, river bank and high water bed streamside, revetment, bed substrate and artificial construction of streamside. Biotic factors included types of vegetation, assemblages of fish, macroinvertebrate, bird and mammal(Otter) in streams. The presence/absence of legal species and biological assessment index were also weighted as important parameters in this study. Scoring criteria selected for each matrix was five rating system; 1=poor, 2=moderate, 3=fair, 4=good, 5=excellent. Numerical ratings for the matrix were then summed. This resulted in a minimum score of 13 if all matrix at a site were poor, and a maximum score of 65 if all matrix were excellent. Five grade system from poor(I) to excellent condition(V) was employed. To verify its validity in natural environment, the evaluation system was applied to the Gapchun stream which is a test bed selected. Our result showed that stream naturalness of each reach was clearly distinguished by biotic and abiotic characteristics. Determination of correlation coefficient between abiotic and biotic factors was also high ($R^2=0.96$, p<0.05). In conclusion, assessment for stream naturalness reflecting abiotic and biotic factors was useful method representing stream integrated.

• Journal of Korean Public Health Nursing
• /
• v.28 no.1
• /
• pp.32-45
• /
• 2014

Purpose: The purpose of this study was to test the effectiveness of an eight session integrated case management program for improvement of medication adherence, physical function, pain, and depression among medical aid beneficiaries with osteoarthritis. Method: A nonequivalent control group pre-posttest design was employed. Participants were 55 medical aid beneficiaries who agreed to participate in this study, and were assigned to an experimental group (n=28) or control group (n=27). The framework of this research derived from Cox's Interaction Model of Client Health Behavior guided the overall intervention and the components. The program led by a case manager with a medication calendar, motivating interviewing and coaching strategies and collaboration with a pharmacist. Analysis included change in scores, ${\chi}^2$-test, and t-test. Result: The results showed significant increase in medication adherence, physical function and decrease joint pain, joint stiffness and depression in the experimental group compared to the control group. Conclusion: The eight session integrated case management program indicated an effect on medication adherence, pain, physical function, and depression. Partnership with a pharmacist is recommended for medication adherence and conduct of further studies will be needed in order to determine the long-term effect of an extended integrated program on health outcomes.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.165-173
• /
• 2018

Underwater vehicles use Inertial Navigation System (INS) with high-performance Inertial Measurement Unit (IMU) for high precision navigation. However, when underwater navigation is performed for a long time, the INS error gradually diverges, therefore, an integrated navigation method using auxiliary sensors is used to solve this problem. In terms of underwater vehicles, the vertical axis error is primarily compensated through Vertical Channel Damping (VCD) using a depth gauge, and an integrated navigation filter can be designed to perform horizontal axis error and sensor error correction using a speedometer such as Electromagnetic-Log (EM-Log). However, since EM-Log outputs the forward direction relative speed of the vehicle with respect to the sea and sea current, INS correction filter using this may cause a rather large error. Although it is possible to design proper filters if the exact model of the sea current is known, it is impossible to know the accurate model in reality. Therefore, this study proposes an INS/EM-Log integrated navigation filter with the function to estimate sea current using an Interacting Multiple Model (IMM) filters, and the performance of this filter is analyzed through a simulation performed in various environments.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.253-260
• /
• 2015

Feature-based NC machining, which requires high quality of 3D CAD model, is widely used in machining aircraft structural part. However, there has been little research on how to automatically detect the CAD model errors. As a result, the user has to manually check the errors with great effort before NC programming. This paper proposes an automatic CAD model errors detection approach for aircraft structural part. First, the base faces are identified based on the reference directions corresponding to machining coordinate systems. Then, the CAD models are partitioned into multiple local regions based on the base faces. Finally, the CAD model error types are evaluated based on the heuristic rules. A prototype system based on CATIA has been developed to verify the effectiveness of the proposed approach.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.3
• /
• pp.283-291
• /
• 2016

Purpose: This study was done to evaluate the persistency of effects of an integrated nursing simulation program on interest in learning, recognition of importance of communication, communication skills, and problem-solving abilities. Method: Forty-seven nursing students were recruited for this quasi-experimental design research. The experimental group (n=23) performed the simulation program for two weeks, and the control group (n=24) performed traditional clinical nursing practice for two weeks. Data were collected at baseline, immediately after the intervention, at 4 weeks, and finally at 8 weeks. Results: With respect to all variables, no significant differences were found between the experimental group and the control group. Interest in learning showed a significant increase in the control group (F=3.59, p=.018) at 4 weeks, and there was a significant increase in problem-solving abilities in the experimental group (F=4.98, p=.004) immediately after the intervention. Conclusion: Findings from this study suggest that the integrated nursing simulation program is as effective as the traditional clinical nursing practice, and the integrated nursing simulation program could be used as an alternative.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.41-44
• /
• 2004

The trend of decreasing the minimal structure sizes in microelectronics is still being continued. Therefore in its roadmap the Semiconductor Industries Association predicts a printed minimum MOS-transistor channel length of 10 nm for the year 2018. Although the resolution of optical lithography still dramatically increases, there are known and proved solutions for structure sizes significantly below 50 nm up to now. In this work a new method for the fabrication of extremely small MOS-transistors with a channel length and width below 50 nm with low demands to the used lithography will be explained. It's a further development of our deposition and etchback technique which was used in earlier research to produce transistors with very small channel lengths down to 30 nm, with a scaling of the transistor's width. The used technique is proved in a first charge of MOS-transistors with a channel area of W=200 nm and L=80 nm. The full CMOS compatible technique is easily transferable to almost any other technology line and results in an excellent homogeneity and reproducibility of the generated structure size. The electrical characteristics of such small transistor will be analyzed and the ultimate limits of the technique will be discussed.

• Journal of Korean Society of Archives and Records Management
• /
• v.14 no.2
• /
• pp.7-30
• /
• 2014

The purpose of this study is to select and apply description elements for the integrated search of archival objects in university archives. For this purpose, the act of public archives management and the research literature were reviewed, and a survey was conducted on related institutions. Moreover, this paper made a comparison by using the archival description of ISAD(G), DACS, RDA, and CCO and referred to the descriptions that are being used at university archives. Based on these analyses, we suggested the description elements for the integrated search of archival objects in university archives and presented the practical application method for it.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.615-622
• /
• 2010

Recent years, the construction projects of a world-wide have changed toward integrated evaluation considering all environmental and economic aspect for ecological construction.. The object of this study is to suggest the method and system for integrated analysis VE/LCC and LCA. In order to integrate and analyze environmental and economic aspects of alternative design elements, decision maker should handle simultaneously much information such as cost, document and drawing. This study presents applicative methods of WBS for integrated management of these information. Also, this study presents a decision support system that can manage DB easily by using VE, LCC and LCA analysis module separately.

• Asia pacific journal of information systems
• /
• v.32 no.3
• /
• pp.630-655
• /
• 2022

This paper examines the integrated QR code payment service (QRIS) adoption by retailers in Indonesia. Indonesia started its cashless journey in 2017 by using electric money in card form. As the country keeps developing, Indonesia has planned to integrate its payment towards a cross-border payment using QR codes by 2025 in the South East Asian region. Facing government vision, MSMEs that act as the significant economy wheel in Indonesia was required to be prepared to face the multi-cultural, multi-currency, and the new tech innovation for doing transactions. However, as a developing country, Indonesia faced significant problems with its infrastructure, which made it hard for merchants to access digital payment. As infrastructure was a common problem for developing countries, Indonesia also faced financial inclusion, lack of digital knowledge, a high amount of cash use, and socialization that made low digital payment penetration. Therefore, as there was a need to increase digital payment penetration for ASEAN integrated payment, this study found that merchant compatibility, facilitating conditions, trust, and relative advantages are drivers for MSMEs using this payment method. Further, this research provides propositions for banks, financial institutions, and governments to develop and evolve towards a cashless ecosystem, especially for a country lacking infrastructure.