온라인 신문 아카이브 연구 국내외 구축 사례를 중심으로 (A Study on the Online Newspaper Archive : Focusing on Domestic and International Case Studies)
-
- 기록학연구
- /
- 제48호
- /
- pp.93-139
- /
- 2016
신문의 역할은 정부의 비판과 감시다. 공공의 문제에 해설과 논평을 하는가 하면 다양한 여론을 형성하고 전달한다. 메타데이터가 확실한 사진 기록물을 담고 있으며, 지역신문의 경우 로컬리티 확보의 중요한 도구다. 신문에 실린 광고와 신문의 편집 역시도 시대의 단면을 보여준다. 이런 신문의 기록학적 가치 때문에 도큐멘테이션 전략을 수립할 때도 신문은 늘 우선적으로 수집이 고려되는 기록물이다. 신문을 보존하고 관리하기 위한 신문 아카이브는 여러모로 중요한 의미를 지닌다. 기자들이 기사를 작성하기 위해 이용하기도 하고, 다양한 학문 분야의 연구를 위한 자료로도 활용이 된다. 신문의 교육적 활용인 NIE에도 이용되지만 신문 아카이브는 디지털 시대에 들어와 더욱 중요한 위치를 차지한다. 미디어 자산을 통합 관리하는 MAM의 핵심에 아카이브가 위치하기 때문이다. 신문 제작뿐만 아니라 신문사 경영 등 전 영역에 걸쳐 새로운 역할을 온라인 아카이브가 하게 될 거라는 전망들이 나오고 있다. 한국에서도 이미 1991년 기사통합 DB인 KINDS가 서비스를 시작했고, 네이버에서는 뉴스 라이브러리라는 온라인 신문 아카이브를 구축해 운영하고 있다. KINDS의 경우 초기에는 뜨거운 반응이 있었으나, 현재는 이용률이 저조한 상태이다. "조선일보", "중앙일보" 등 주요 신문사가 빠져 있고, 이용자 인터페이스도 불편한 점이 많기 때문이다. 하지만 공공예산이 투입되어 무료로 이용할 수 있다는 점이나, 지방지에 대한 접근성 등은 큰 장점이다. 고신문의 경우 국립중앙도서관에서 지속적으로 디지타이징을 하고 있다. 개별 신문사들의 경우도 아카이브라고 하기 민망한 수준이자만 서비스를 제공하고 있다. 미국의 경우 의회도서관에서 국립인문기금과 함께 역사적 신문을 디지타이징 하는 'CHRONICLING AMERICA' 프로젝트를 진행 중이다. 각 주의 대학과 역사협회, 공공 도서관에 기금을 줘 매년 10만 페이지의 지역신문을 디지타이징하고 있다. 영국 역시도 국립도서관이 중심이 되어 'The British NEWSPAPER Archive'라는 온라인 신문 아카이브를 구축하고 있는데, 미국과 달리 유료로 운영된다. 이곳 역시도 합동정보시스템위원회의 공공예산이 투입되었으며, 지금도 구축을 계속 이어가고 있다. 개별 신문사들은 아카이브 솔루션을 구매해 온라인 아카이브를 구축하는 경우가 많다. ProQuest Archiver, Gale Cengage-NewsVault가 대표적인 아카이브 플랫폼으로 신문 자체가 표준화되고 규격화되어 있는 만큼 이를 통한 아카이브 구축도 효율적인 방법으로 보인다. 국내의 온라인 신문 아카이브를 개선하기 위해서는 아카이브에 대한 인식의 전환과 함께 과감한 투자 등이 요구된다.
뇌의 하부 구조인 해마의 전역적 부피 감소와 국부적 형상 변화는 정신의학적 질환에 깊게 관련되어 있다. 해마 구조에 관한 형상 분석 연구는 크게 해마 형상 표현 모델을 구축하고, 이러한 형상 표현으로부터 형상 유사성을 계산하는 과정으로 구성된다. 본 논문에서는 메쉬, 복셀, 골격 데이터를 포함하는 복합적인 옥트리 기반의 형상 표현을 이용하여 해마의 형상을 분석하기 위한 새로운 방법을 제시한다. 우선 해마에 관한 MRI 데이터를 입력으로 받아, 마칭큐브 알고리즘을 사용하여 다해상도 메쉬 모델을 구축한다. 이렇게 구성된 다각형 모델은 깊이맵 기반의 복셀화 방법을 이용하여 중간 단계의 이진 복셀 데이터로 변환된다. 그리고 변환된 복셀 데이터로부터 슬라이스 기반의 골격화 방법에 의하여 해마의 3차원 골격을 추출한다. 그런 후에 옥트리 기반의 다해상도 형상 표현을 얻기위해 해마의 메쉬, 복셀, 골격 데이터를 계층적으로 공간 분할하여 저장하고, 광선 추적 기반의 메쉬 샘플링 방법을 적용하여 샘플 메쉬 데이터를 추출한다. 최종적으로, 형상간 유사성 측정을 위하여 추출된 골격으로부터 방사되는 광선들과 충돌되는 각 샘플 메쉬 쌍에 대하여
ZERODUR와 용융 석영으로 저산란 반사경을 제작하고 산란 특성을 연구하였다. Bowl feed 법을 이용하여 초연마면인 표면거칠기 0.326
빅데이터의 중요성에 대한 인식이 확산되고, 관련한 기술이 발전됨에 따라, 최근에는 빅데이터의 처리와 분석의 결과를 어떻게 시각화할 것인지가 매우 관심 받는 주제로 부각되고 있다. 이는 분석된 결과를 보다 명확하고 효과적으로 전달하는 데에 있어서 데이터의 시각화가 매우 효과적인 방법이기 때문이다. 시각화는 분석 시스템과 사용자가 소통하기 위한 하나의 그래픽 사용자 인터페이스(GUI)를 담당하는 역할을 한다. 통상적으로 이러한 GUI 부분은 데이터의 처리나 분석의 결과와 독립될 수록 시스템의 개발과 유지보수가 용이하며, MVC(Model-View-Controller)와 같은 디자인 패턴의 적용을 통해 GUI와 데이터 처리 및 관리 부분 간의 결합도를 최소화하는 것이 중요하다. 한편 빅데이터는 크게 정형 데이터와 비정형 데이터로 구분할 수 있는데 정형 데이터는 시각화가 상대적으로 용이한 반면, 비정형 데이터는 시각화를 구현하기가 복잡하고 다양하다. 그럼에도 불구하고 비정형 데이터에 대한 분석과 활용이 점점 더 확산됨에 따라, 기존의 전통적인 정형 데이터를 위한 시각화 도구들의 한계를 벗어나기 위해 각각의 시스템들의 목적에 따라 고유의 방식으로 시각화 시스템이 구축되는 현실에 직면해 있다. 더욱이나 현재 비정형 데이터 분석의 대상 중 대부분을 차지하고 있는 텍스트 데이터의 경우 언어 분석, 텍스트 마이닝, 소셜 네트워크 분석 등 적용 기술이 매우 다양하여 하나의 시스템에 적용된 시각화 기술을 다른 시스템에 적용하는 것이 용이하지 않다. 이는 현재의 텍스트 분석 결과에 대한 정보 모델이 서로 다른 시스템에 적용될 수 있도록 설계되지 못하는 경우가 많기 때문이다. 본 연구에서는 이러한 문제를 해결하기 위하여 다양한 텍스트 데이터 분석 사례와 시각화 사례들의 공통적 구성 요소들을 식별하여 표준화된 정보 모델인 텍스트 데이터 시각화 모델을 제시하고, 이를 통해 시각화의 GUI 부분과 연결할 수 있는 시스템 모델로서의 시각화 프레임워크인 TexVizu를 제안하고자 한다.
This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.
본 연구는 점포를 방문하는 동안 노출되는 매장의 물리적 환경 특성이 서비스 브랜드 개성과 재구매의도에 미치는 영향력을 규명하기 위해 시도되었다. 이를 위해 연구모형을 개발하여, 특정 서비스 브랜드의 이용객을 대상으로 설문조사를 실시하고 구조방정식을 이용하여 분석하였다. 연구 결과는 우선, 서비스의 물리적 환경은 주변요인, 디자인요인, 사회요인으로, 그리고 서비스브랜드 개성은 유능함, 성실함, 흥분됨, 세련됨, 강인함 차원으로 분류되었다. 둘째, 물리적 환경의 모든 차원들이 모든 서비스 브랜드 개성차원에 정(+)의 영향을 주었으며, 물리적 환경의 서비스 브랜드 개성에 대한 영향력은 각 차원별로 상이하였다. 셋째, 서비스 브랜드 개성은 모두 재구매의도에 정(+)의 영향을 주었으며, 특히 세련됨 차원에 미치는 영향이 가장 켰다. 넷째, 서비스의 물리적 환경은 재구매의도에 정(+)의 영향을 주었으며, 특히 물리적 환경 중 사회요인이 재구매의도에 가장 큰 영향을 주는 것으로 나타났다. 이와 같은 결과들은 물리적 환경 연출은 브랜드 개성 형성의 결정요인으로 서비스 브랜드 차별화의 핵심요인으로 작용하므로, 호의적인 브랜드 개성 창출을 위해서는 우선적으로 물리적 환경에 대한 효율적 관리 방안이 강구되어야 함을 보여준다.
최근 경제재로서 수자원(Water Resources)의 속성이 공공재 성격을 동시에 띠면서 수자원기술의 측정과 성과 관리 체계를 확보하고 활용해야 할 필요성이 제기되고 있다. 그 동안 수자원기술의 평가는 대부분 순현재가치(NPV)나 비용편익효과(B/C)를 바탕으로 경제성 평가(Feasibility Study) 혹은 기술(환경)영향평가(Technology Assessment)로 수행되어 왔으며, 연구성과의 확산과 피드백을 받을 수 있는 기술 기반 사업의 경제적 가치를 객관적으로 평가하는 모델은 체계화되지 않았다. 그리하여, 본 연구에서는 K-water(한국수자원공사)가 담당하고 있는 수자원분야의 기술적 특성에 적합한 기술평가 체계를 구축할 필요성을 느끼고, 공익형 수자원기술에 대한 기술가치평가 모델을 개발하여 사례를 실증하고자 한다. 본 연구에 적용된 K-water 평가대상기술은 공공재로서, 사회전반에 기여한 가치 및 성과를 측정하고 관리할 수 있는 도구로 활용 가능하다. 예를 들면, 사회전반에 기여한 가치를 산출하여, 편익의 파급효과에 대한 성과 홍보자료, 혹은 비용 투입 당위성에 대한 근거자료로 활용할 수 있고, 공공기술의 특성상 대규모 연구개발 투입 비용에 대한 정당성을 확보할 수 있다. 따라서, 공공재를 다루는 한국의 대표적 공기업인 K-water가 사업 운영상의 전략을 수립하고 투입개발 비용에 대한 성과산출 근거 기반을 구축할 수 있을 것으로 판단된다. 본 고에서는 K-water가 담당하고 있는 수자원분야의 기술적 특성에 적합한 기술평가 체계를 기반으로, 공익형 수자원기술에 대한 기술가치평가 모델을 개발하여 사례를 실증하였다. 특히, 일본 산업기술종합연구소(AIST)의 평가방법론을 활용하여 연관 편익항목을 기준으로 비용계정에 매칭시킨 후, 기존의 비용-편익 접근법과 FCF(Free Cash Flow)법의 평가체계를 활용하는 'K-water 고유모델'을 제시하였으며 이를 통해 K-water 연구성과 관리체계 상의 파이프라인을 구축하는 동시에 "해수담수화" 관련 기술에 대한 검증을 수행하였다. 수자원 분야 기술의 특성을 반영한 웹기반 가치평가시스템의 설계 구성로직과 평가프로세스를 분석하며, 기술통합관리시스템 상의 공익형 및 수익형 기술가치를 산출하기 위한 각 모델별 참조정보 및 DB 연계로직도 살펴본다. 종래의 타 분야 기술가치평가 시스템이 지닌 재무적 데이터 기반의 사업가치 산출로직에 수자원 특성이 반영된 정성평가지표의 정량화 지수를 함께 반영한 하이브리드형 평가모듈과 실제 웹기반 평가의 UI 구성화면을 검토한다. K-water의 가치평가 모형은 공익형과 수익형 수자원 기술을 구분하여 평가하게 되는데, 먼저 수익형 기술가치평가는 "기술의 경제성"이라고 하는 특성상 외부 산업유형의 수익(Profit)특성을 반영하여 화면을 설계 가능하다. 예를 들어 K-water 기술인벤토리 수도부문 기술은 수처리 멤브레인과 같이 수익 지향 기술이 다수 분포된다. 반면에, 공익형 기술가치평가는 공공의 편익(Benefit)과 비용(Cost)특성을 반영하여 화면을 설계하게 되는데, 댐과 같이 편익을 지향하는 기술을 평가하는데 활용된다. 또한 본 고에서 제시된 비용-편익 기반의 공익형 기술가치평가 모형(K-water 고유 평가모델)에 대한 적정성 검토를 위해 사회적 수명(20년)을 지닌 수자원 기술의 편익흐름 추정으로부터 실제 사례에 적용해 보았으며, 향후에는 다양한 사업환경 특성을 반영한 비즈니스 모델별 평가모형 검증을 추가적으로 수행하고자 한다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70