• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.36-41
• /
• 2014

Electro-Mechanical Actuator installed on aircraft consists of a decelerator which magnifies the torque to rotate an axis connected with aircraft control surface, a control section which controls the motor assembly through receiving orders from cockpit and a motor assembly which rotates the decelerator. EMA controls aircraft attitued, position, landing, takeoff, etc. It is important part of a aircraft. Aircraft maneuvering make vibration of EMA. Vibration may cause the vibration fatigue. For that reason, it is necessary to analyze the system safety. In this paper, first EMA is modeled in finite element method and analyzed the response from input vibration. second EMA is tested and analyzed from modal experimental data. third EMA Fe model is updated and re analyzed. and EMA is verified safety with $3{\sigma}$ stress and S/N curves.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.639-643
• /
• 1996

The manufacturing system has been changed from labored manual process system, which is managed and operated by managers and operators, to CIMS(Computer Integrated Manufacturing System) for integration of manufacturing, research, development and consumption in the age of diverse customer's needs[6]. However, because it involves the hierarchical system composed of many sub-systems interface and its installation & setup cost is very expensive, CIMS has many difficulties in constructing the durable optimal system that is able to adapt to rapid in-outer circumstance change. So, HMS(Holonic Manufacturing System), the new conceptual manufacturing system having the self-problem-solving and self-organization[11], is instructed to solve these difficulties that it has in these days. The system flexibility in the HMS is able to be ensured, with the integration of human's strong points into mechatronics manufacturing system to reduce interference among sub-systems. In this paper, the manufacturing process rationalization and integration of the assembly line in an automobile industry, has lots of problems in efficiency and productivity, has been studied in an early stage of converting the present state of process system to HMS, which is human-oriented processing system, to improve the line efficiency, system productivity and reliability by using human capability effectively. This paper is derived into the human-oriented & object-oriented holons settlement of the shop floor system composed of processing, assembly and material handling system for the future holonic manufacturing system, which is going to be computer supported control system.

• 한국문헌정보학회지
• /
• 제43권1호
• /
• pp.235-250
• /
• 2009

이 연구에서는 국회도서관 이용자인 입법관련 종사자와 일반 이용자를 대상으로 국회도서관의 공공기관 및 정부정보 서비스에 대한 설문조사를 바탕으로, 이용행태 및 만족도에 대해 분석하였다. 분석결과 공공기관 및 정부정보의 이용 및 필요성은 입법관련 종사자가 일반 이용자에 비해 더 많은 것으로 나타났다. 응답자들은 전체적으로 국회도서관의 공공기관 및 정부정보 서비스를 개선할 필요가 있으며, 공공기관 및 정부정보를 통합하여 검색 제공할 포털사이트에 대한 필요성 역시 비교적 높게 인식하고 있는 것으로 조사되었다.

• 한국시뮬레이션학회논문지
• /
• 제21권2호
• /
• pp.91-101
• /
• 2012

자동차 생산라인은 차체라인, 도장라인, 의장라인으로 구성된다. 이러한 생산라인들은 직렬로 배치되어 흐름생산을 거치기 때문에 전후 공정의 상태에 따라 라인에서는 starvation(물량 부족으로 인한 생산 불가능) 또는 blocking(용량 초과로 인한 생산 불가능)으로 인한 정지가 발생한다. 이에 starvation이나 blocking으로 오는 생산 손실을 막기 위해 WBS, PBS와 같은 창고를 개별적으로 보유하여 운영된다. 본 논문은 라인의 버퍼역할을 하는 각 창고들을 통합하여 운영할 수 있는 통합창고 시뮬레이션 모형을 제안한다. 적정 Stacker Crane 대수와 AGV 대수를 구하고, 이를 운영할 수 있는 운영방법론을 제안한다. 또한 개별창고와 통합창고 모형을 시뮬레이션을 이용하여 효율성 비교를 한다.

• 한국보건간호학회지
• /
• 제35권1호
• /
• pp.5-18
• /
• 2021

Purpose: This study aimed to develop a client-centered integrated home nursing care model for rural areas by analyzing public health nursing, hospital-based home care services, and long-term nursing care in Korea. Methods: The literature review performed included data from the National Assembly Library, DBpia, RISS, and KISS, Google Scholar, the Ministry of Government Legislation, Statistics Korea, and the Ministry of Health and Welfare. Results: The client-centered and integrated home nursing care model in a rural area was opened as the Home Nursing Care Center in a public health center operating directly or on consignment. This model provides both a hospital-based home care services as well as long-term care, in accordance with the health status of the client and difficulty of nursing services. Moreover, the nurse who worked in a sub-organization (Centers for Supporting Healthy Living, Public Health Units, and etc.) of the public health center as care coordinator and case manager facilitates to connect home nursing care services and social welfare services. Conclusions: Our data indicates that the client-centered integrated home nursing care model in rural areas effectively combines professional services, regional accessibility, and social welfare services.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.178-186
• /
• 2023

Three activation methods (constant voltage, current cycling, and hydrogen pumping) were applied to investigate the effects on the performance of the membrane electrode assembly (MEA) loaded with PtCo/C catalyst. The current cycling protocol took the shortest time to activate the MEA, while the performance after activation was the worst among the all activation methods. The constant voltage method took a moderate activation time and exhibited the best performance after activation. The hydrogen pumping protocol took the longest time to activate the MEA with moderate performance after activation. According to the distribution of relaxation time analysis, the improved performance after the activation mainly comes from the decrease of charge transfer resistance rather than the ionic resistance in the cathode catalyst layer, which suggests that the existence of water on the electrode is the key factor for activation.

• Asian review of World Histories
• /
• 제4권1호
• /
• pp.83-123
• /
• 2016

We describe a vision of historical analysis at the world scale, through the digital assembly of historical sources into a cloud-based database, where machine-learning techniques can be used to summarize the database into a time-integrated actor-to-actor complex network. Using this time-integrated network as a template, we then apply the method of automatic narratives to discover key actors ('who'), key events ('what'), key periods ('when'), key locations ('where'), key motives ('why'), and key actions ('how') that can be presented as hypotheses to world historians. We show two test cases on how this method works. To accelerate the pace of knowledge discovery and verification, we describe how historians would interact with these automatic narratives through an online, map-based knowledge aggregator that learns how scholars filter information, and eventually takes over this function to free historians from the more important tasks of verification, and stitching together coherent storylines. Ultimately, multiple coherent storylines that are not necessary compatible with each other can be discovered through human-computer interactions by the map-based knowledge aggregator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.987-992
• /
• 2005

Manufacturing companies should perform process planning and its evaluation concurrently with new product developments so that they can be highly competitive in the modern market. Process planners should make decisions in the manner of concurrent and collaborative engineering in order to reduce the manufacturing preparation time and cost when developing new products. Automated generation of analysis models from the integrated database, which contains process and material information, reduces time to prepare analyses and makes the models reliable. In this research, we developed a web-based system for concurrent and collaborative system for production flow analysis, using web, database, and simulation technology. An integrated database is designed to automatically generate analysis models from process and material plans without reworking the data. This system enables process planners to evaluate their decision fast and share their opinions with others easily. With this system, it is possible to save time and cost for assembly process and material planning, and reliability of process plans can be improved

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.275-282
• /
• 2013

Applications such as vibration isolation, gravity compensation, pick-and-place machines, etc., would benefit from (long-stroke) cylindrical/tubular permanent magnet (PM) actuators with integrated passive gravity compensation to minimize the power consumption. As an example, in component placing (pick-and-place) machines on printed circuit boards, passive devices allow the powerless counteraction of translator including nozzles or tooling bits. In these applications, an increasing demand is arising for high-speed actuation with high precision and bandwidth capability mainly due to the placement head being at the foundation of the motion chain, hence, a large mass of this device will result in high force/power requirements for the driving mechanism (i.e. an H-bridge with three linear permanent magnet motors placed in an H-configuration). This paper investigates a tubular actuator topology combined with passive gravity compensation. These two functionalities are separately introduced, where the combination is verified using comprehensive three dimensional (3D) finite element analyses.