• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1429-1430
• /
• 2015

The present study developed an air flow generator system with standard syringes usually adapted for spirometer calibration. It consisted of servo-motor, driver, linear robot, and controller operating as a whole integrated system capable of generating air flows at different speeds on two identical 3L syringes. Experiments demonstrated high accuracy in both flow and volume generation as required such that relative errors were approximately 2.1% and 0.5%, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2020

In this study, a multichannel gas-liquid microextraction system is designed by integrating the automatic elution of extraction line and multichannel gas-purging liquid phase microextraction. The system uses an injection pump and inert gas to push the extraction solvent to a sample bottle of a gas-phase color autosampler and then implements multichannel gas-liquid microextraction and gas chromatography-mass spectrometry. The system also employs a three-way integrated micro-high-temperature heater, syringe pump, and microflow controller to realize the simultaneous processing of multiple groups of samples, thus improving the sample pretreatment speed and reproducibility and reducing human error. Autoinjection experiments were implemented with polycyclic aromatic hydrocarbon standard samples. The experiments show that the average recovery rate of the system exceeds 70%, and the relative standard among the channels is less than 15%.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.50-56
• /
• 2018

The Internet of Things (IoT) and Visible Light Communication (VLC) is opening up new services in lighting industry by integrating sensory network features in addition to standard illumination functionality. In this progressive developments, the next generation lighting devices for smart homes are capable to sense the environmental conditions and transfer the captured data through lights to gateway controller to access remotely. The smart home environmental sensor information's are few kbps only so VLC systems need to built-in with low rate light connectivity to transfer data to the gateway. To provide error free communication, the quality of a received light signal is important to be considered when designing an VLC receiver. Therefore, this paper proposes the design of robust low rate IoL receiver design using NCP302 voltage detector for micro controller to adapt the IoT/IoL front end module for system integration. To evaluate the proposed system performance, the Arduino UNO based IoT/IoL controller designed with lighting, sensors and lights connectivity interfaces. The experimental result shows that the robust interference rejection is feasible on proposed VOL receiver and possible to have an error-free communication up to 10 kbps at a low SNR using OOK modulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.31-40
• /
• 2009

This paper presents a design of a high performance DC-DC boost converter as a power module for SOC designs. It applied to this chip that reduced inductor and capacitor for integrating on a chip, and it operates with a switching frequency of 100MHz. It has reliability and stability in high switching frequency. The controller of DC-DC boost converter is designed by voltage-mode control method and compensated properly. The designed DC-DC converter is fabricated with the 0.18${\mu}m$ standard CMOS technology with a thick-gate oxide option. The overall die size is 8.14$mm^2$, and controller size is 1.15$mm^2$. The converter has the maximum efficiency over 76% for the output voltage of 4V and load current larger 300mA. The load regulation is 0.012% (0.5mV) for the load current change of 100mA.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.281-286
• /
• 2012

In the growing standard of people's lives, we want desire to create eco-friendly water space what is called the Green Technology that is in the limelight. These green space is introduced the cultural contents and we use the water, music, and nature as tool of emotional verbalism. Presently, when we want to make scenario, water landscape scenario is made by director. but these systems have some disadvantages as the cost and limitation of direction. There is a growing interest in the integrated control system based on PC and Internet. In this paper, it is about fountain control system. Previous research area was only one using programmable logic controller or industrial PC. we proposed the development of intelligent green fountain culture system for healthy emotional self-concept. And we made automatic weather sensing system that is designed by the intelligent green fountain culture system to estimate the time-variant system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.464-466
• /
• 2019

Controllers used in nuclear power plants require high reliability. A controller including a Field Programmable Gate Array (FPGA) and a Complex Programmable Logic Device (referred to hereinafter as FPGA) has been applied to many Nuclear Power Plants (NPP) in the past, including the APR1400 (Advanced Power Reactor 1400), a Korean digital nuclear power plant. Initially, the FPGA was considered as a general IC (Integrated Circuit) and verified only by device verification and performance testing. In the 1990s, research on FPGA verification began, and until the FPGA became a chip, it was regarded as software and the software Verification and Validation (V&V) using IEEE 1012-2004 was implemented. Currently, IEC 62566, which is a European standard, has been applied for a lot of verification. This method has been evaluated as the most sensible method to date. This is because the method of verifying the characteristics of SoC (System on Chip), which has been a problem in the existing verification method, is sufficiently applied. However, IEC 62566 is a European standard that has not yet been adopted in the United States and maintains the application of IEEE 1012 for FPGA. IEEE 1012-2004 or IEC 62566 is a technical standard. In practice, various methods are applied to meet technical standards. In this paper, we describe the procedure and important points of verification method of Nuclear Safety Class FPGA applying SoC verification method.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.4 s.17
• /
• pp.11-15
• /
• 2006

Expose equipment system that is used for manufacturing process of Flat Panel Display, is most important equipment in whole process. Expose equipment that is for making pattern of mask on substrate, consists of optical part, stage part and transport part. The stage is an important part that aligns mask and substrate for delivering pattern of mask to substrate exactly. In this paper, control system of expose stage that is able to use mask and substrate of diverse size, with PC controller using GUI interface instead of PLC control system. The existing PLC control system does not have the suitable structure for using mask of diverse size. GUI interface integration control system is based on PC. So it has the advantage of convenient use and active operation. We embodied PLC control system in integration control system based on PC, and verified utility possibility through the standard test course.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.283-292
• /
• 1998

The engineering process including design, analysis/evaluation and manufacturing activities is becoming one of the key issues to embody a concurrent engineering concept. This paper proposes a framework to integrated the complicated engineering design and manufacturing processes under the concurrent engineering environment. The framework offers the following facilities: (1) to represent the complicated engineering process (2) to coordinate design activities and execute the process in a distributed environment (3) to support a communication among the related engineers. The engineering processes is depicted using process flow graphs that consist in tasks and the corresponding input and output data. The engineering activities in the defined processes can be executed in a distributed environment through process controller of the framework. Engineers can communicate to suggest their opinions and to exchange product information in the framework. We have conformed the CORBA standard to integrate various distributed engineering the and communicate among them, and used a Java to support the platform independent environment on the Internet. Since the proposed framework an be a formal approach to integrate the engineering processes by providing formalism, parallelism, reusability, and flexibility, it can be effectively applied to embody the concurrent engineering concept in a distributed environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.600-607
• /
• 2006

For the effective operation of manufacturing system, FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing) system are developed. In these systems, a machine tool is the target of integration in last 3 decades. In nowadays, the conventional concept of machine tools is changing to the autonomous manufacturing device based on knowledge-evolution through applying advanced information technology in which open architecture controller, high speed network and internet technology are contained. In this environment, a machine tool is not the target of integration but the subject of cooperation. In the future, a machine tool will be more improved in the form of a knowledge-evolution based device. In order to develop the knowledge-evolution based machine tools, this paper proposes the structure of knowledge evolution in M2M(Machine To Machine) and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design the dialogue agent module in M2M environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge-evolution based machine tools can be hereafter more easily implemented.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.187-193
• /
• 2010

This paper proposes a cooling system using thermoelectric elements for improving the output of building integrated photovoltaic (BIPV) modules. The temperature characteristics that improve the output of a BIPV system have rarely been studied up to now but some researchers have proposed a method using a ventilator. The efficiency of a ventilator depends mainly on the weather such as wind, irradiation etc. Because this cooling system is so sensitive to the velocity of the wind, it is unable to operate in the nominal operating cell temperature (NOCT) or the standard test condition (STC) which allow it to generate the maximum output. This paper proposes a cooling system using thermoelectric elements to solve such problems. The temperature control of thermoelectric elements can be controlled independently in an outdoor environment because it is performed by a micro-controller. In addition, it can be operated around the NOCT or the STC through an algorithm for temperature control. Therefore, the output of the system is increased and the efficiency is raised. This paper proves the validity of the proposed method by comparing the data obtained through experiments on the cooling systems of BIPV modules using a ventilator and thermoelectric elements.