• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.50-61
• /
• 2002

This paper - following 'Functional requirement of marine waste cleaning ships and organization of the fleets'[1] - describes on the preliminary conceptual design procedure for the multi-purpose marine waste cleaning system for shallow waters. The working area of this system is Yellow Sea and part of South Sea of South Korea. As the first step, we determined the functional requirements including the daily target of waste collecting. Then, the preliminary conceptual design and general arrangements were carried out. In order to evaluate the safety and efficiency of this designed system, the stability check and the computer graphic simulation were carried out. Finally, the sea trial performance test of integrated systems in Yeosoo ports was performed and the designed system was shown its validity and effectiveness.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.488-499
• /
• 2016

We present a design and optical simulation of a cost-effective hybrid daylighting/LED system composed of mixing sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting. In this approach, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The proposed sunlight collector consists of a Fresnel lens array. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. The visible rays passing through the beam splitters are coupled to a stepped thickness waveguide (STW) by tilted mirrors and confined by total internal reflection (TIR). LEDs are integrated at the end of the STW to improve the lighting quality. LEDs’ light and sunlight are mixed in the waveguide and they are coupled into an optical fiber bundle for indoor illumination. An optical sensor and lighting control system are used to control the LED light flow to ensure that the total output flux for indoor lighting is a fixed value when the sunlight is inadequate. The daylighting capacity was modeled and simulated with a commercial ray tracing software (Lighttools^TM). Results show that the system can achieve 63.8% optical efficiency at geometrical concentration ratio of 630. A required accuracy of sun tracking system achieved more than ±0.5^o . Therefore, our results provide an important breakthrough for the commercialization of large scale optical fiber daylighting systems that are faced with challenges related to high costs.

• International Journal of Contents
• /
• v.12 no.2
• /
• pp.12-23
• /
• 2016

This paper presents a novel concept of Disaster Prevention Design (DPD) and its derived subjects and topics for the safety of folk villages in both Korea and Japan. Nowadays, design concepts are focused on 'human-oriented nature' as a whole and this tendency fits to be appropriate for disaster prevention against real dangers of a future society, which is expected to have far more complicated features. On the other hand, convergences have performed with other areas in the field of Information Communication Technology (ICT) so that we can easily find examples like 'the strategy of ICT-based convergence' of the Korean Government in 2014. Modern content designs including UI (user interface) and USN (ubiquitous sensor network) have been developed as one of the representative areas of ICT & UD (universal design) convergences. These days this novel concept of convergence is overcoming the existing limitations of the conventional design concept focused on product and/or service. First of all, from that point our deduced topic or subject would naturally be a monitoring system design of constructional structures in folk villages for safety. We offer an integrated model of maintenance and a management-monitoring scheme. Another important point of view in the research is a safety sign or sign system installed in folk villages or traditional towns and their standardization. We would draw up and submit a plan that aims to upgrade signs and sign systems applied to folk villages in Korea and Japan. According to our investigations, floods in Korea and earthquakes in Japan are the most harmful disasters of folk villages. Therefore, focusing on floods in the area of traditional towns in Korea would be natural. We present a water-level expectation model using deep learning simulation. We also apply this method to the area of 'Andong Hahoe' village which has been registered with the World Cultural Heritage of UNESCO. Folk village sites include 'Asan Oeam', 'Andong Hahoe' and 'Chonju Hanok' villages in Korea and 'Beppu Onsen' village in Japan. Traditional Streets and Markets and Safe Schools and Parks are also chosen as nearby test-beds for DPD based on ICT. Our final goal of the research is to propose and realize an integrated disaster prevention and/or safety system based on big data for both Korea and Japan.

• Journal of Fashion Business
• /
• v.3 no.1
• /
• pp.81-92
• /
• 1999

The purpose of this thesis is to analyze the present conditions and problems of the Electronic Commerce, specially by the fashion companies that utilize the Internet and to propose using plans of Internet Electronic Commerce as a strategic method of fashion companies that have a information-oriented mind to adapt itself to modern century. On the basis of my analysis, I propose some using plans of Internet Electronic Commerce by the fashion companies as follows. As a means of construction method, it is need for the pertinent companies to have an information-oriented mind and then to construct the low-expense but high-speed communication Infrastructure. As an operation and management method, positive web site advertisements plans, such as promotion, using various mass media, subscribing to the Internet search engines and dissemination of products information, etc., are need for companies to attract the consumers to connect to the web site. Second, to offer more satisfactory experiences, it is need for companies to frame the integrated shopping mall as a strategic alliance in the management of shopping mall. To frame the integrated shopping mall is also effective in solving financial problems of shopping mall management and introducing of security system As a means of technology supplement, security management systems, such as SSL or SET, should be introduced for consumers to pay the price and furnish their personal informations. Second, new technology developments, such as the newest simulation programs using Virtual Reality to solve the problem of products' actual feeling, should be need for consumers to feel as they really put clothes on. If these technological developments are realized, fashionable products will be dealt in the Internet shopping mall as well and the marketability of Internet shopping mall will be expanded.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.316-330
• /
• 2008

This paper proposes a novel method for transporting various types of user traffic effectively over the next generation network called integrated services digital network 3 (ISDN3) (or quantum network) using quantum packets. Basically, a quantum packet comprises one or more 53-byte quanta as generated by a "quantumization" process. While connection-oriented traffic is supported by fixed-size quantum packets each with one quantum to emulate circuit switching, connectionless traffic (e.g., IP packets and active packets) is carried by variable-size quantum packets with multiple quanta to support store-and-forward switching/routing. Our aim is to provide frame-like or datagram-like services while enabling cell-based multiplexing. The quantum packet method also establishes a flexible and extensible framework that caters for future packetization needs while maintaining backward compatibility with ATM. In this paper, we discuss the design of the quantum packet method, including its format, the "quantumization" process, and support for different types of user traffic. We also present an analytical model to evaluate the consumption of network resources (or network costs) when quantum packets are employed to transfer loss-sensitive data using three different approaches: cut-through, store-and-forward and ideal. Close form mathematical expressions are obtained for some situations. In particular, in terms of network cost, we discover two interesting equivalence phenomena for the cut-through and store-and-forward approaches under certain conditions and assumptions. Furthermore, analytical and simulation results are presented to study the system behavior. Our analysis provides valuable insights into the. design of the ISDN3/quantum network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.549-557
• /
• 2012

In this paper an on-chip photo energy harvesting system with MPPT(Maximum Power Point Tracking) control is proposed. The ISC(Integrated Solar Cell) is implemented using p-diff/n-well diodes available in CMOS processes. MPPT control is implemented using the linear relationship between the open-circuit voltage of a PV(Photovoltaic) cell and its MPP(Maximum Power Point) voltage such that a small pilot PV cell can track the MPP of a main PV cell in real time. Simulation results show that the designed circuit with the MPPT control delivers the MPP voltage to load even though the load is heavy such that the load circuit can operate properly. The proposed circuit is designed in 0.18um CMOS process. The designed main PV cell and pilot PV cell occupy $8mm^2$ and $0.4mm^2$ respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.175-181
• /
• 2016

In the conventional E-bike, a 42 V/10 A Li-ion battery drives a 24 V/10 A BLDC motor via a 6-switch PWM DC/AC inverter. The major problems of the conventional battery-fed motor drive systems are listed as follows. To charge the battery, an external battery charger (adapter) is required, which degrades the portability of E-bike users. In addition, given the high-frequency operation of the motor drive inverter, the switching losses are significant, which degrades the whole power efficiency. High-voltage batteries (42 V) require a complex battery management system (BMS), which degrades the reliability of the battery pack. In this paper, an embedded boost-converter battery charger for E-bikes is proposed. The variable output boost converter, which converts 16.8 V battery voltage to the required variable voltage of the inverter input, can use a low-voltage battery and thus improve the reliability of batteries. By varying the inverter input voltage via boost converter, a DC link voltage control method can be applied to reduce the switching frequency of the inverter, which improves the whole power efficiency. Given that the function of a flyback charger is integrated in the proposed boost converter, the portability of the E-bike user can be maximized by excluding an external adapter. The validity of the proposed circuit will be confirmed by operation mode analysis and simulation. Moreover, experimental results of integrative charger using Li-ion battery and 200 W motor test will be showed with a prototype sample as well.

• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.425-434
• /
• 2010

Integrated gasification combined cycle (IGCC) is an efficient and environment-friendly power generation system which is capable of burning low-ranked coals and other renewable resources such as biofuels, petcokes and residues. In this study some process modeling on a conceptual entrained flow gasifier was conducted using the ASPEN Plus process simulator. This model is composed of three major steps; initial coal pyrolysis, combustion of volatile components, and gasification of char particles. One of the purposes of this study is to develop an effective and versatile simulation model applicable to numerous configurations of coal gasification systems. Our model does not depend on the hypothesis of chemical equilibrium as it can trace the exact reaction kinetics and incorporate the residence time calculation of solid particles in the reactors. Comparisons with previously reported models and experimental results also showed that the predictions by our model were pretty reasonable in estimating the products and the conditions of gasification processes. Verification of the accuracy of our model was mainly based upon how closely it predicts the syngas composition in the gasifier outlet. Lastly the effects of change oxygen are studied by sensitivity analysis using the developed model.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.367-379
• /
• 2011

This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.465-471
• /
• 1997

An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings.