• Industrial Engineering and Management Systems
• /
• 제15권4호
• /
• pp.403-431
• /
• 2016

The objective of this study is to integrate the business, maintenance and production processes of a manufacturing system by incorporating errors. First, the required functions are estimated according to the historical data. The system activities are simulated by Visual SLAM software and the required outputs are obtained. Several outputs including lead times in different dimensions, total cost and production rates are computed through simulation. Finally, data envelopment analysis (DEA) is utilized in order to select the best option between the defined scenarios due to the multi-criteria feature of the problem. This is the first study in which the lead times, cost and production rates are simultaneously considered in the integrated system imposed of business, maintenance and production processes by incorporating errors. In the current study, the major bottlenecks of the system being studied are identified and suggested different strategies to improve the system and make the best decision.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.81-87
• /
• 2015

Recently, in order to prevent increasing energy usages in the international community, many countries have attempted to develop the innovative renewable energy systems. Among the renewable energy systems, Ground source heat pump(GSHP) system which supply the heating, cooling and hot water in the building has been attracted by its stability of heat production and high efficiency. However, the initial drilling costs become very expensive and the construction period takes longer the other systems, because GSHP system needs more than 100 m depth drilling. In this study, in order to reduce initial costs of the GSHP, the building integrated geothermal system using the horizontal heat exchanger was developed. The heating and cooling load in the standard housing model was calculated by a simulation and the system design capacity in the high-rise apartment was decided by the total load. Based on the system design capacity, the high-rise apartments were applied to a BIGS and vertical GSHP system and there are analyzed about initial costs. In the result, the initial cost of BIGS could reduce 24% of the initial cost of the vertical GSHP system.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.138-147
• /
• 2014

In manufacturing companies, different types of production have been developed based on diverse production strategies and differentiated technologies. The production systems have become smart, factories are filled with unmanned manufacturing lines, and sustainable manufacturing technologies are under development. Nowadays, the digital manufacturing technology is being adopted and used in manufacturing industries. When this technology is applied, a lot of efforts, time and cost are required and training professionals in-house is limited. In this paper, we introduce e-FEED system (electronic based Front End Engineering and Design) that is the integrated design and analysis system for optimized manufacturing line development on virtual environment. This system provides the functions that can be designed easily using library and template based on standardized modules and analyzed automatically the logistic and capacity simulation by one-click and verified the result using visual reports. Also, we can review the factory layout using automatically created 3D virtual factory and increase the knowledge reuse by e-FEED system.

• 한국시뮬레이션학회논문지
• /
• 제32권3호
• /
• pp.23-31
• /
• 2023

소프트웨어 개발에는 시스템 엔지니어링 프로세스와 유사한 요구 사항 분석, 설계, 구현, 단위 테스트 및 통합 테스트를 포함한 일련의 단계가 포함된다. 본 연구는 다기능 레이다 소프트웨어를 개발하기 위해 MathWorks사의 모델 기반 설계 플랫폼을 활용하고 타당성과 효율성을 평가하였다. 기존 레이다 소프트웨어의 개발은 통합적인 형태보다는 단일 알고리즘 단위로 이루어졌기 때문에, 요구 분석이나 통합 테스트가 별도로 이루어졌고, 이들에 대한 통합 관리를 위해 추가적인 도구나 노력을 요구하였다. 본 논문에서 적용한 모델 기반 플랫폼은 요구사항 분석 및 할당, 시뮬레이션을 통한 알고리즘 개발, 배포를 위한 자동 코드 생성, 통합 요구사항 테스트 및 결과 관리를 위한 통합 개발 환경을 제공한다. 이 플랫폼을 통해 다기능 레이다 소프트웨어의 다단계 모델을 개발하고, 테스트 하네스를 사용하여 검증하며, 요구 사항을 관리하고, 자동 코드 생성툴을 사용하여 하드웨어 배포 가능한 언어로 변환하는 전과정을 수행하였다. 이러한 모델 기반 통합 개발을 통해 잘못된 의사소통이나 기타 인적 요인으로 인한 오류를 줄이고 개발 일정과 비용을 절감할 수 있을 것으로 기대한다.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 2010

An integrated machining center is developed for high precision and productivity manufacturing. The developed machine is composed of the high precision spindle using ball bearings, the high stiffness bed and the three axis CNC controller with the high resolution AC servo motor. In this paper, structural and modal analysis for the developed machine are carried out to check the design criteria of machine. The analysis is carried out by FEM simulation with using the commercial software, CATIA V5, ANSYS and ARMD. The simulation model of machine is made by shell and solid finite elements. This study also presents the measurement system on the modal analysis of an integrated machining center. The weak part of the machine is found by the analytical evaluation. The results provide with the structural modification data for good dynamic behaviors. And the safety of machine is confirmed by the modal analysis of modified machine design. As this study results can be trustworthy with the analysis of ANSYS and CATIA, integrated machining center can be successfully developed.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.692-698
• /
• 1999

This paper analyzes the effect of DGS(Dispersed Generation System) on the voltage regulation of the traditional distribution system of which the voltage is controlled by the bank LDC(Line Drop Compensator). Through the simulation results for 22.9kV class distribution system with DGSs, some general relationships among the operating power factor and introduction limit of DGS, and the sending-end reference voltage determined by internal setting coefficients of the LDC are derived. Those relationships are that the introduction limit of DGS increases as the power factor of DGS goes from lagging to leading and also as the allowance of the sending-end reference voltage increases. From the relationships, a operation method of the power distribution system integrated with DGSs is proposed from the view point of the operating power factor of DGS and new voltage regulation method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.821-825
• /
• 1991

This paper presents an architecture and control logic of a Flexible Manufacturing Cell (FMC) which is one of the important elements under Computer Integrated Manufacturing (CIM) environment. To implement FMC, it is very important to develop a software which can control and monitor the overall system in an integrated environment. Our primary concern in this research is not to develop individual systems, but to integrate them in the hierarchical control level. Progress on the research of integrating CAD/CAM, Process Planning, Off-line Robot Programming and Simulation module into FMC control system is reported. FMC hardware system used here has an Automated Storage & Retrieval System (AS/RS), a conveyor system, a transfer robot, a CNC milling machine, a bar-code system, and an IBM PC/AT as Cell Control System (CCS). In order to demonstrate the operational result, the name plates, text-carved aluminium plates, are manufactured by this system.

• 한국주거학회논문집
• /
• 제15권2호
• /
• pp.107-115
• /
• 2004

The objective of this study is to show the system Integrations and control method for operation of the Radiant Floor Cooling. The systems for radiant floor cooling system consist of only using the radiant floor cooling and the radiant floor cooling integrated with a dehumidification system. And the study is suggested control method with composed radiant floor cooling system through simulations. Radiant floor cooling systems compose of four main parts: an existing radiant heating panel, manifold, cooling source and controller, and sensors. If dehumidifying or supplementary cooling is needed, additional equipments such as PAC and AHU are needed. Simulation results show that control method only using radiant floor cooling system can prevent condensation and set room air temperature with the exception of hot and humid periods and control method using the radiant floor cooling integrated with a dehumidification system is comfort thermal environments and can reduce the cooling load quickly, moreover, show comfort control method to meet various cooling operation situations.

• 한국국방경영분석학회지
• /
• 제11권1호
• /
• pp.55-78
• /
• 1985

This thesis provides the implementation of a simulation model for a particular Local Area Network (LAN), employs carrier sense multiple access (CSMA) bus architecture, which implements functions of the Stock Point Logistics Integrated Communication Environment (SPLICE). First, specifications of the model are identified based on the given functional specification and operating system design. Then the approach taken for modeling and programming in GPSS is discussed. Finally, the program and results of the simulation run are provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.676-679
• /
• 1997

Networking for manufacturing is gaining importance as a nerve system of computer-integrated manufacturing(CIM). Among the various network types, the most inexpensive type called fieldbus is specifically aimed to interconnect simple devices such as sensors and actuators. For this purpose, there are several choices of the protocol such as Profibus, FIP, Foundation Fieldbus, and IEC/ISA fieldbus. This paper presents the simulation results of Profibus and FIP. Both protocols has been simulated in order to evaluate the performance such as transmission delay and throughput under different protocol parameter setting and traffic conditions.