• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.68-71
• /
• 2001

Integrated Simulation System of Aircraft is a networked virtual synthetic environment. This paper presents hardware-in-the-loop simulation, man-in-the-loop simulation, computer generated aircraft, virtual prototype of aircraft dynamics, and networked simulation system.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1036-1041
• /
• 2008

Double facade systems are often paid attention of as an effective energy saving measure for curtain wall buildings. However, it is not easy to install the system in existing buildings and requires substantial investment. An innovative double window system is proposed in this study which can be installed with exiting window systems in a cost effective way. the proposed system is connected to existing return ducts to make airflow between the existing window and the newly installed window. To ensure the best performance of the proposed system, simulation-based analysis was implemented in which airflow characteristics of inside double window were examined according to air pressures of return duct and window material by using computer simulation ESP-r. the overview of the proposed system and the results of the simulation-based analysis are presented in this paper.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.221-229
• /
• 2015

M&S (Modeling & Simulation) based design is widely accepted for the development of the future weapon system with better performance in a cheaper and faster way. Integrated simulation environment (ISE) is needed for the M&S based design. On the ISE, system engineers can not only verify design options but also validate system requirements. In this paper, we propose architectural models of the integrated simulation environment (ISE) which incorporates mission effectiveness M&S (Modeling & Simulation), system performance M&S, the optimization model of integrated performances, digital mockup and virtual prototype. The ISE architectural models may be used to implement the ISE for the development of the future unmanned ground combat vehicle.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.45-50
• /
• 2015

The simulation model of All-Electric-Ship consists of electrical and mechanical systems. Running the total simulation requires considerable time and causes a lack of computer memory, because the two systems have different dynamic characteristics. Therefore, integrated simulation is practically impossible. This paper proposes the simplified model of electrical system to reduce simulation time significantly, compared to the detailed model. The validity of the proposed simplified model is verified by comparing detailed and simplified simulation results. Thus, the simplified models are applied to the integrated system. As a result, total system simulation can be implemented.

• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2002

This paper presents a structure and architecture of an integrated simulation method (ISM) to meet the requirements of virtual factory engineering (VFE). Combining CAD, VR and discrete event simulation techniques, the ISM provides static and dynamic simulation functions for implementation of VFE throughout the lifecycle. The static simulation can be used to evaluate the factory layout. The dynamic simulation enables us to evaluate ergonomics of factory, process performance of production system, feasibility of production plan and operation of factory, and to train operators safely, which cover the whole VFE lifecycle. The principles of the key techniques of VFE, including virtual factory data management system (VFDMS), static and dynamic simulation, are also discussed. To demonstrate and validate the ISM, a case study has been carried out in an assembly factory.

• IE interfaces
• /
• v.20 no.4
• /
• pp.438-447
• /
• 2007

This paper presents an aspect-oriented approach to simulation design and analysis in system design phase for integrated logistics system simulation. The integrated logistics system composed of AS/RS (Automated Storages and Retrieval System), AGVs (Automated Guided Vehicle System), STVs (Sorting Transfer Vehicle System) and Conveyor System is designed by using the aspect-oriented approach and UML (Unified Modeling Language). The multi-factorial design of experiments and regression analysis are used for design parameters of the system and Evolution Strategies is used to verify each parameter. Aspect-oriented approach for the integrated logistics system simulation shows the advantages of code reusability, extendible, modulation, easy improvement and a better design technique.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.106-108
• /
• 1997

Many new office buildings are being built as intelligent buildings equipped with building automation(HA) systems, office automation(OA) systems, and telecommunication(TC) systems in order to provide pleasant building environment and the ease of maintenance and facility management. Building control systems which are employed in intelligent buildings require varieties of advanced control systems and network systems for efficient integrated management. Design and installation of these types of advanced building control systems take a lot of efforts and also they are costly. In order to design these systems, it is necessary for the designers to have the integrated simulator including proper network system simulation. In this paper, the integrated simulator that consist of HVAC system, lighting system, elevator system, parking system based on the network system is presented. For the development of integrated simulator, AHENA which is the general-purpose software tool for a simulation with reinforced GUI is used.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.730-734
• /
• 2013

The dynamic simulation of machine tools and motion control systems has been widely used for optimization, design verification, control design, etc. There are three main streams in dynamic simulation: structural dynamic analysis based onthe finite element method, dynamic motion analysis based on equations of motion, and control system analysis based on transfer functions. Generally, one of these dynamic simulation methods is chosen and employed for specific purposes. In this study, an integrated dynamic simulation is introduced, in which the structure, motion, and control dynamics are combined together. Commercially well-known software is used in the integrated dynamic simulation: ANSYS, ADAMS, and Matlab/Simulink. Using the integrated dynamic simulation, the dynamics of a magnetic bearing stage is analyzed and the causes of oscillation and noise are identified. A controller design for suppressing a flexible dynamic mode is carried out and verified through the integrated dynamic simulation.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.17-29
• /
• 2004

The focus of this study is to represent a methodology of analysis for integrated logistic system by means of the Evolution Strategies and Data Envelopment Analysis(DEA). The integrated logistic system is composed of AS/RS (Automated Storages and Retrieval System), AGVs(Automated Guided Vehicle System) and Conveyor System. We design the simulation alternatives with choosing the qualitative critical factors for the each subsystem. Evolution Strategies is used to optimize the quantitative critical factors and responses of each alternative. DEA is applied to measure the efficiency of the alternatives in order to select the optimal operation efficiency scheme. The method of analysis which combines Evolution Strategies with DEA can be used to analyze the qualitative and quantitative critical factors in the integrated logistic systems.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.131-138
• /
• 2020

The SBA Integrated Information system is constructed and operated for scientific and systematic management of Defense information utilizing whole process of weapon system acquisition from requirement institution to operation maintenance. In order to utilize m&s resources actively and effectively in the life cycle of weapon system acquisition, efficient management plans of the SBA integrated Information system is required. As a result of identifying usage on SBA Information system and performance of operation performance measurement, it was defined that establishment of the SBA Integrated Information system process and provision of detailed system are mandatory for activating m&s resource and supporting process of acquisitions. In this study, Defense m&s information system is analyzed and improvement plans of SBA Integrated Information system is provided for efficient operation of SBA integrated Information system.