• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.75-80
• /
• 2012

The integrated protection unit of CHEONGUNG is composed of chemical-biological equipment and air conditioner equiped heating element. The protection capabilities against chemical-biological agent were measured by using simulant agents such as n-Hexane, KM5 Screening Smokes and CS agent. The experimental test results with simulant agents verify the protective performance of the integrated protection unit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.994-996
• /
• 1997

This paper describes a SU(Station Unit) for integrated digital protection and control system, which is specified with fast responses and reliable operations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.445-453
• /
• 2015

A fully integrated cost-effective and low-power single chip Lithium-Ion (Li-Ion) battery protection IC (BPIC) for portable devices is presented. The control unit of the battery protection system and the MOSFET switches are integrated in a single package to protect the battery from over-charge, over-discharge, and over-current. The proposed BPIC enters into low-power standby mode when the battery becomes over-discharged. A new auto release function (ARF) is adopted to release the BPIC from standby mode and safely return it to normal operation mode. A new delay shorten mode (DSM) is also proposed to reduce the test time without increasing pin counts. The BPIC implemented in a $0.18-{\mu}m$ CMOS process occupies an area of $750{\mu}m{\times}610{\mu}m$. With DSM enabled, the measured test time is dramatically reduced from 56.82 s to 0.15 s. The BPIC chip consumes $3{\mu}A$ under normal operating conditions and $0.45{\mu}A$ under standby mode.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.363-367
• /
• 2011

In this paper a simulator for Integrated Onboard Signalling System(IOSS) will be presented and illustrated. IOSS which is integrated with there signalling systems such as ERTMS/ETCS Level 1 ATP(Automatic Train Protection), ATC(Automatic Train Control) and ATS(Automatic Train Stop) is a signalling system for HEMU-400X(Highspeed Electric Multiple Unit - 400km/h eXperiment). HEMU-400X is under development as the next generation high-speed train in Korea. Before conducting a trial run of HEMU-400X with IOSS, we must carry out functional test of IOSS. The simulator is suggested in this paper for testing and verification of IOSS. The simulator can help to test all function of IOSS although a real train and trackside equipments are not existed. Also the simulator can make a fault in trackside equipment intentionally. In that scenario, we can figure out how IOSS handle emergency situations.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.463-468
• /
• 2004

The digital motor protection, measuring and control equipment, as called "The digital motor control equipment", for applying to single/three phase motors designed an integrated one unit and manufactured a compact size which will be installed on the motor control center. It performs serveral protection functions and motor starting function, and measures and indicates a serveral measurement. This paper proposes the design concept and functionality of new digital motor control equipment to improve control performance and integrate several equipments for the control and protection of the motor.

• 한국초등과학교육학회지:초등과학교육
• /
• 제35권1호
• /
• pp.26-38
• /
• 2016

The purpose of this study was to grasp the characteristics of composition regarding the material-centered integrated unit of environmental and natural studies, a science subject in Finland, to investigate a need for applying the material-centered integrated unit to the science curriculum of Korea. For the purpose, the study made an analysis on contents, inquiry activities, and visual materials (the most important in the elementary science curriculum and textbook composition), and it brought following results: First, as a result of analyzing the area of contents, the bicycle material-centered integrated unit comprised a large proportion of 44 pages (25.3%) of the whole 174 pages from the environmental and natural studies textbook for the third grade. The contents included such various concepts as traffic rules, safety, environmental protection and pollution, recycling and separate collection, tubes and triangular structures, wedges and screws, leverage, wheels, axles, gears, elasticity (spring), friction, and so on. Second, as a result of analyzing contents related to the thinking ability of inquiry activities, "expecting or confirming expectations" and "application" are included in every lesson, and one lesson is composed in such a way that students can study on bicycles as a practical material for their daily life and they can improve various thinking abilities. Third, as a result of analyzing the circumstances of inquiry activities, daily circumstances made up eight lessons (80.0%) and technical and social circumstances made up two lessons (20.0%) by focusing on bicycles, a material related to students' daily life. Fourth, as a result of analyzing visual materials, the percentage of pictures and photos was high at 53.4% and 45.2% respectively. As a result of analyzing the role of visual materials, the percentage of the illustrative role and explanatory-complementary role was high at 52.1% and 47.9% respectively. Lastly, as a result of analyzing from the epistemological view to interpret the relation between visual materials and students and the position of visual materials, the visual textbook materials were provided toward a way that students can decrease their feeling of epistemological separation in the three fields of ideational metafunction, interpersonal metafunction, and textual metafunction.

• The Plant Pathology Journal
• /
• 제38권1호
• /
• pp.1-11
• /
• 2022

Fusarium culmorum is one of the most important causal agents of root rot of wheat. In this study, 10 F. culmorum isolates were collected from farms located in five agro-ecological regions of Morocco. These were used to challenge 20 durum wheat genotypes via artificial inoculation of plant roots under controlled conditions. The isolate virulence was determined by three traits (roots browning index, stem browning index, and severity of root rot). An alpha-lattice design with three replicates was used, and the resulting ANOVA revealed a significant (P < 0.01) effect of isolate (I), genotype (G), and G × I interaction. A total of four response types were observed (R, MR, MS, and S) revealing that different genes in both the pathogen and the host were activated in 53% of interactions. Most genotypes were susceptible to eight or more isolates, while the Moroccan cultivar Marouan was reported resistant to three isolates and moderately resistant to three others. Similarly, the Australian breeding line SSD1479-117 was reported resistant to two isolates and moderately resistant to four others. The ICARDA elites Icaverve, Berghisyr, Berghisyr2, Amina, and Icaverve2 were identified as moderately resistant. Principal component analysis based on the genotypes responses defined two major clusters and two sub-clusters for the 10 F. culmorum isolates. Isolate Fc9 collected in Khemis Zemamra was the most virulent while isolate Fc3 collected in Haj-Kaddour was the least virulent. This work provides initial results for the discovery of differential reactions between the durum lines and isolates and the identification of novel sources of resistance.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.18-27
• /
• 1996

By integrating WDM to OPS unit which plays an improtant role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet easily the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been perfomred. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals sucessfully.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1461-1464
• /
• 2019

본 논문에서는 위치추적과 방사선 측정이 가능한 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드 개발을 제안한다. 제안하는 방사선 피폭 방호 소방관 인명구조 경보기의 임베디드 보드는 신호 처리부, 통신부, 전원부, 메인 제어부 등으로 구성된다. 신호 처리부에서는 차폐설계, 노이즈 저감 기술 및 전자파 차감 기술 등을 적용한다. 통신부에서는 WiFi 방식을 사용하여 통신하도록 설계한다. 메인 제어부에서는 전력 소모를 최소한으로 줄이고 작고 밀도가 높으면서도 낮은 발열성을 통하여 높은 고성능 시스템을 구성한다. 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드는 재난 및 화재현장 등 열악한 환경에 노출되어 운영하는 장비이므로 방수와 내열성을 고려한 외형도 설계 및 제작을 한다. 제안된 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 효율을 판단하기 위하여 공인시험기관에서 실험하였다. 방수 등급은 소방관용 장비의 특성 상 재해 현장에서 물에 의한 침수 시에도 안정적인 성능을 유지할 수 있는 IP67 등급을 달성하였다, 동작 온도는 재해현장에서의 폭넓은 환경변화에 대응할 수 있는 -10℃~50℃의 범위에서 측정이 되었다. 배터리 수명은 붕괴사고 등의 비상 재난 상황에 대처할 수 있는 1회 충전 후 144시간 사용 가능함이 측정되었다. PCB를 포함한 최대 통신 거리는 재난 상황 시 지휘통제 차량과의 직선거리에서 기존의 50m보다 넓은 범위인 54.2m에서 작동하는 것이 측정되었다. 따라서 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 그 효용성이 입증되었다.