• Journal of Positioning, Navigation, and Timing
• /
• 제7권2호
• /
• pp.73-90
• /
• 2018

Various navigation systems are integrated with the Global Navigation Satellite System (GNSS) to improve navigation performance so that continuous navigation information can be obtained even when navigation performance is degraded or navigation is not available due to the outage of GNSS. Time and cost can be reduced by evaluating performance of the integrated navigation system through Modeling and Simulation (M&S) software prior to the deployment of the integrated navigation system. The measurements of the navigation system should be generated to evaluate performance through of the navigation system M&S software. This paper proposes a method of designing a navigation environment generation module in M&S software of the integrated navigation system. To show applicability of the proposed method to M&S software design of the integrated navigation system, functions are verified through MATLAB. And then visual C++ based M&S software for the integrated navigation system is implemented to check the operation of the navigation environment generation module. The reference trajectory is generated and true measurements of Global Positioning System (GPS), Korea Positioning System (KPS), and enhanced Long range navigation (eLoran) are generated from the reference trajectory. The navigation results obtained from the true measurements are compared with the reference trajectories. The results show that the measurements generated using the design generation module by the proposed method are valid and the navigation environment generation module can be applied to M&S software of the integrated navigation system.

• Journal of The Korean Association For Science Education
• /
• 제34권6호
• /
• pp.549-558
• /
• 2014

Integrated concepts that are broad enough to embrace facts, principles, laws, and concepts of multiple disciplines could become the core of integrated education. Integrated concept-centered education enables effective and practical learning. In this study, the Delphi Method was implemented targeting experts in science (physics, life science, chemistry, and earth science) and humanities (history, geology, economics, ethics, and politics) to find out the integrated concept that can be used to design the concept-centered integrated education in the Republic of Korea. 124 experts participated in this survey. Delphi survey was conducted for three rounds. In the first round, an open questionnaire was given to experts to collect feasible integrated concepts in each major field. Then, in the second round experts were asked to select integrated concepts that could be used practically in the field of their major. In the third round, the integrated concept with selection frequency over medium value were given. They were asked to evaluate the applicability of integrated concepts by using the Likert-scale questionnaire. Through this process, content validity was analyzed. As a result, five integrated concepts (change, interaction, space-time, energy, and equilibrium) were selected for the inter-science integration. And thirteen integrated concepts (conflict, community, relationship, structure, power, diversity, culture, change, society, interaction, freedom, justice, and equality) were chosen for the inter-humanities integration. Finally, for the science-humanities integration, seven integrated concepts (structure, diversity, change, interaction, cycle, system, and environment) were determined.

• Journal of the Korean Society of Safety
• /
• 제27권2호
• /
• pp.57-64
• /
• 2012

For the vibration control of earthquake-excited buildings, an optimal design method of integrated control system considering soil-structure interaction is studied in this paper. Interaction between soils and the base of the building is simply modeled as lumped parameters and equations of motion are derived. The equations of motion are transformed into the state space equations and the probabilistic excitations such as Kanai-Tajumi power spectral density function is introduced. Then an optimization problem is formulated as finding hybrid or integrated control systems which minimizes the stochastic responses of the building structure for given constraints. In order to investigate the feasibility of the optimization method, an example design and numerical simulations are performed with tenstory building. Finally, numerical results are compared with a conventional design case that soil-structure interaction is not considered.

• Journal of the Korean Operations Research and Management Science Society
• /
• 제23권4호
• /
• pp.63-73
• /
• 1998

With the success of flexible manufacturing systems(FMSs), flexible assembly systems(FASs) have been developed to automatic factories further. As in a cellular FMS, a celluar FAS is considered as the most flexible and feasible assembly systems configuration. This paper presents a method for the integrated layout design in cellular FASs. Unlike the traditional paper, this paper deals with the formation of cells and the layout of cells for jobs with operation times on different machines. The procedure in this paper consists of two distinct phases. The first phase presents machine arrangement in a double rows flowline. cell formation not to allow intercellular movements, and integrated layout design in cellular FASs considering the characteristics of FAS, layout, and production factors This phase uses older optimal algorithm. The second phase proposes to balance the system with an objective of reducing the degree of workload deviation in the cells. Simulated annealing method is used to balance the system. This phase also shows the integrated layout design in cellular FASs with the cost less than total cost of the first phase.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.205-220
• /
• 2014

This paper is concerned with the modification of multidisciplinary feasible formulation for MDO problems using the integrated coupled approximate models. A drawback of conventional MDFs is the numerical difficulty in decomposing the design variables and deriving the coupled equations of state. To overcome such a drawback of conventional methods, the coupling in analysis and design is resolved by approximating the state variables in each discipline by the response surface method and by modifying the optimization formulation using the corresponding integrated coupled approximate models. The validity, reliability and effectiveness of the proposed method are illustrated and verified through two optimization problems, a mathematical MDF problem and the multidisciplinary optimum design of suspension unit of wheeled armored vehicle.

• International journal of steel structures
• /
• 제18권5호
• /
• pp.1598-1606
• /
• 2018

An integrated optimal structural design method for a diagrid structure and control device was developed. A multi-objective genetic algorithm was used and a 60-story diagrid building structure was developed as an example structure. Artificial wind and earthquake loads were generated to assess the wind-induced and seismic responses. A smart tuned mass damper (TMD) was used as a structural control system and an MR (magnetorheological) damper was employed to develop a smart TMD (STMD). The multi-objective genetic algorithm used five objectives including a reduction of the dynamic responses, additional stiffness and damping, mass of STMD, capacity of the MR damper for the integrated optimization of a diagrid structure and a STMD. From the proposed method, integrated optimal designs for the diagrid structure and STMD were obtained. The numerical simulation also showed that the STMD provided good control performance for reducing the wind-induced and seismic responses of a tall diagrid building structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제20권5호
• /
• pp.1040-1048
• /
• 2016

Recently, the studies of integrated reliability analysis for combat systems are actively progressing. Especially, the research of integrated reliability analysis is emphasized to overcome limitations of the previous studies. In this paper, we propose a calculation technique for integrated hit probability based on front and side hit probabilities that analyzed in previous studies to improve the time-effectiveness. Also, we find out the integrated reliability of each component based on the integrated hit probability which is calculated, and we propose the method which applied the reliability block diagram technique to analyze the whole combat system of the reliability by function kills. For verifying the proposed method, we applied the proposed method to armored fighting vehicle model. The proposed method considers crew which does not considered the element in the previous study and expects to enhance the accuracy of reliability analysis and the time-effectiveness compared with the previous study.

• Journal of Information Display
• /
• 제13권2호
• /
• pp.55-59
• /
• 2012

In this paper, a concept of an integrated elastomer substrate for a three-dimensional (3D) liquid crystal display based on the integral-imaging method is presented. The elemental lens array and columnar spacers were integrated into one of the two substrates, an elastomer substrate, through an imprinting process. The integrated elastomer substrate was capable of maintaining the uniform liquid crystal (LC) cell gap and promoting homeotropic LC alignment without any surface treatment. The monolithic approach reported herein will provide a key component for 3D displays with enhanced portability through a more than 40% weight reduction compared with the conventional integral-imaging method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제33권3호
• /
• pp.87-92
• /
• 2010

In this paper, we suggest a PLCS-based architecture and operation method for providing interoperability in SBA integrated collaborative environment. Specifically, the suggested architecture is based on the distributed collaborative environment which employes the PLCS application protocol and integrated repository for representing and sharing product data information between collaborators remotely located. As an example of data representation, a military vehicle system is considered and two kinds of information, including state and activity/process, are explained. We expect that the suggested architecture can be used as a reference model to develop an efficient SBA integrated collaborative environment.

• Journal of the Korean Society for Precision Engineering
• /
• 제15권8호
• /
• pp.11-16
• /
• 1998

Recently, the motor-integrated spindle systems have been used to simplify the machine tool structure, to improve the motion flexibility of machine tool, and to perform the high-speed machining. In this study, a static and dynamic analysis system for motor-integrated high-speed spindle systems is developed based on Timoshenko theory, finite element method and windows programming techniques. Since the system has various analysis modules related to static deformation analysis, modal analysis, frequency response analysis, unbalance response analysis and so on, it is useful in performing systematically the design and evaluation processes of motor-integrated high-speed spindle systems under windows GUI environment.