• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.89-92
• /
• 2010

A bolometer sensor used in an infrared thermal imaging system has many advantages on the process because it does not need a separate cooling system and its manufacturing is easy. However the sensitivity of the bolometer is low and the fixed pattern noise(FPN) is large, because the bolometer sensor is made by micro electro mechanical systems (MEMS). These problems can be fixed-by using the high performance readout integrated circuit(ROIC) with noise reduction techniques. In this paper, we propose differential delta sampling circuit to remove the mismatch noise of ROIC itself, the FPN of the bolometer. And for reduction of FPN noise, the reference signal compensation circuit which compensate the reference signal by using on-resistance of MOS transistor was proposed.

• IE interfaces
• /
• v.19 no.4
• /
• pp.333-341
• /
• 2006

RFID (Radio Frequency Identification) is a technology that can input identification information to microchip and make goods, animals, persons recognized, chased, and managed using radio frequency, and is founded on the core technology of ubiquitous environment of the future. In this paper, we propose a RFID integrated system designed to manage the lifecycle of an individual product efficiently. The proposed system can enable traceability and visibility of items through their entire life by integrating distribution and banking information on the basis of EPCglobal Network. It may provide the infra of Digital Manufacturing and RTE (Real Time Enterprise) and effective information sharing structure with existing legacy system (ERP, CRM, SCM) by real time.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.226-228
• /
• 1998

Current power systems are integrated and operated in the form of EMS/SCADA with the development of computer and communication. With this EMS/SCADA system, the production, transmission and distribution of power are effectively operated. But if the communication protocol are different from each other, it is difficult to integrate the whole system. To solve this problem, Electric Power Research Institute (EPRI) issued new standard communication protocol between control centers named Inter-Control Center Protocol (ICCP). ICCP specifies the use of Manufacturing Message Specification(MMS) for the messaging services needed by ICCP in layer 7 and support the communication between heterogeneous control centers. This study deals the characteristics of ICCP, relation between ICCP and MMS and also implements the data exchange between control centers using ICCP.

• Journal of Information Technology Services
• /
• v.21 no.2
• /
• pp.97-107
• /
• 2022

Recently, interest in smart factories is increasing. Investments to improve intelligence/automation are also being made continuously in manufacturing plants. Facility automation based on sensor data collection is now essential. In addition, we are operating our factories based on data generated in all areas of production, including production management, facility operation, and quality management, and an integrated standard information system. When producing LCD polarizer products, it is most important to link trace information between data generated by individual production processes. All systems involved in production must ensure that there is no data loss and data integrity is ensured. The large-capacity data collected from individual systems is composed of key values linked to each other. A real-time quality analysis processing system based on connected integrated system data is required. In this study, large-capacity data collection, storage, integration and loss prevention methods were presented for optimization of LCD polarizer production. The identification Risk model of inspection products can be added, and the applicable product model is designed to be continuously expanded. A quality inspection and analysis system that maximizes the yield rate was designed by using the final inspection image of the product using big data technology. In the case of products that are predefined as analysable products, it is designed to be verified with the big data knn analysis model, and individual analysis results are continuously applied to the actual production site to operate in a virtuous cycle structure. Production Optimization was performed by applying it to the currently produced LCD polarizer production line.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.91-103
• /
• 2015

To increase the competitiveness of domestic manufacturers products, CAE system, process and fast delivery of development information and implementation of retrieval system introduced for manufacturers is necessary situation For this purpose, this study analysed instance to build integrated design simulation system that provide design automation, modular design, design standards, automation of quality verification and design knowledge. Also, we discuss that improve design of the new product and increasing the satisfaction of our customers. Completed development of simulation systems are the basic steps, and pilot operation about new product. During pilot operation, the systems is improved. Through this process, the experimental data accumulated to increase the effectiveness of the simulation, and improve the utilization. Therefore, this study have many theoretical, practical value for growing global company.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.117-128
• /
• 2005

This study proposes an integrated monitoring system for data reliability improvement in a steel manufacturing industry. The data obtained from existing steel manufacturing process is not micro data which is gathered at the occurring point, but average value (macro data) which is gathered from the occurring point to ending point. This kind of macro data is not only difficult for a detailed analysis for an error causing factor, but it might cause a fatal influence as well on the quality of produced goods even if the error is within an error tolerance. And during the process of steel production, thousands of data is produced in a second, thus requiring database plan to manage abundant amount of data. Therefore, the following proposed system is capable of collecting as well as analyzing all the data generated from the process of product production. And the system was able to raise the efficiency of the database server by planning the database to handle large capacity data. Also, by applying web-based technology, inquiries and analysis of data with no limit on time and space was possible with PC connected to the intranet. Hence, the system was able to work on effective quality improvement of manufactured products, plus able to raise the reliability of the product. Also, accumulated data from long period of time was used for fundamental material for new controlling model, operation technology, and new product development.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.2
• /
• pp.62-72
• /
• 1999

We consider a Direct Input Output Manufacturing System(DIOMS) which has a munber of machine centers placed along a built-in Automated Storage/Retrieval System(AS/RS). The Storage/Retrieval(S/R) machine handles parts placed on pallets for the machine centers located at either one or both sides of the AS/RS. This paper deals with the operational aspect of DIOMS and determines the optimal operating policy by combining computer simulation and genetic algorithm. The operational problem includes: input sequencing control, dispatching rule of the S/R machine, machine center-based part type selection rule and storage assignment policy. For each operating policy, several different policies are considered based on the known research results. In this paper, using the computer simulation and genetic algorithm we suggest a method which gives the optimal configuration of operating policies within reasonable computation time.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.1
• /
• pp.62-66
• /
• 2006

The learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work, the authors presented an iterative precision of linear decentralized learning control based on p-integrated learning method for the vertical dynamic multiple systems. This paper develops an indirect decentralized learning control based on adaptive control method. The original motivation of the learning control field was learning in robots doing repetitive tasks such as an assembly line works. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. Some techniques will show up in the numerical simulation for vertical dynamic robot. The methods of learning system are shown for the iterative precision of each link.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.253-258
• /
• 2008

PLM(Product Lifecycle Management) is one of innovative manufacturing paradigms which leverages e-business technologies to allow a company's product content to be developed and integrated with all company business process through the extended enterprise. In these days, most construction companies also make an effort to enhance their systems for creating, sharing and managing information to improve business efficiency through entire lifecycle of project execution. Because of different needs, business process and diverse engineering activities such as design, structural analysis, installing simulation, documents and data managements, a new paradigm for construction companies is needed to manage and share the entire workflow, and information in total project lifecycle. In this paper, we conducted user requirement and business process analysis of the construction to design architecture of C-PLM(Construction Project Lifecycle management) and implement a prototype of C-PLM systems based on commercial PDM system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.3
• /
• pp.229-237
• /
• 2017

Presented in this paper is a case study of constructing a smart factory for aircraft parts. The construction procedure involves four phases. First of all, its management goals are set, and layout design and simulation are carried out in the conceptual design phase. In the detail design phase, operating scenarios for each module are written out, and probable risks are analyzed by expert groups, and then requirements for developing equipments and subsystems are determined with consideration for element technologies and their integration schemes into the smart factory. In the fabrication and installation phase, system development, equipment fabrication and installation are proceeded in a separate manner, and then integrated together subsequently. In the operation and improvement phase, the factory is stabilized, sophisticated and improved constantly during real operation.