• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.29-42
• /
• 2014

Extensive research has been conducted on supplier evaluation and selection as a strategic and crucial component of supply chain management in recent years. However, few articles in the previous literature have been dedicated to the use of fuzzy inference systems as an aid in decision-making. Therefore, this essay attempts to demonstrate the application of this method in evaluating suppliers, based on a comprehensive framework of qualitative and quantitative factors besides the effect of gradual coverage distance. The purpose of this study is to investigate the applicability of the numerous measures and metrics in a multi-objective optimization problem of the supply chain network design with the aim of managing the allocation of orders by coordinating the production lines to satisfy customers' demand. This work presents a dynamic non-linear programming model that examines the important aspects of the strategic planning of the manufacturing in supply chain. The effectiveness of the configured network is illustrated using a sample, following which an exact method is used to solve this multi-objective problem and confirm the validity of the model, and finally the results will be discussed and analyzed.

• 한국정보시스템학회지:정보시스템연구
• /
• 제20권3호
• /
• pp.111-127
• /
• 2011

This study is intended for international cooperation in the field of LED were analyzed. The results, LED wide coverage areas, and a promising future is expected to grow fast enough to occupancy for a major national technology is a competitive situation. Chip Scale Package, including our country, such as LED manufacturing technology that might be competitive in parts, but new technologies such as renal substrate R&D and technology development still active preemption is not the situation. Renal substrate, particularly, large-diameter sapphire, large size/large LED manufacturers, such as a promising area for future research and development support will be needed. To do this, previous research in this area and the U.S., Japan cooperation in such studies also will need to expand. Bibliometrics way through this study, analytical techniques and analytical tools used in the integrated analysis of the usefulness and necessity of the system development were found.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1687-1696
• /
• 1995

An integrated fault diagnosis system for heterogeneous manufacturing environments is developed. This system has a contrast with existing diagnosis systems in the respect that they are mostly for diagnosing faults on individual machines. In addition to the usual (e.g., audio, electrical) diagnostic signals, the characteristics of products from the machines are considered as the unifying diagnostic parameters among heterogeneous machines in the diagnosis. The system is composed of a knowledge representation scheme and a diagnostic query processing mechanism. Its knowledge representation scheme allows the diagnostic knowledges from heterogeneous unit diagnostic systems to be uniformly expressed in terms of the causal relations among relevant data items. It is flexible in the sense that causes for one relation can be effects for another may be reflected on our knowledge representation scheme. The diagnosis mechanism is based on a probabilistic inferencing method. This probablistic diagnosis mechanism provides more general diagnosis than existing ones in that it accommodates multiple causes and takes complication among causes into account. These scheme and mechanism are applied to a typical example to demonstrate how our system works.

• 산업경영시스템학회지
• /
• 제23권61호
• /
• pp.99-104
• /
• 2000

Although the outsourcing of logistics is one of the most widely discussed contemporary topics in the field of business logistics, efforts to organize them in an integrated broad-based body of knowledge have so far been rather limited. In order to develop and implement the outsourcing of logistics effectively and efficiently, this paper presents the procedure for establishment of outsourcing logistics systems. Several case studies including 7 firms from X Group in glass manufacturing industry and 1 firm from Y Group in chemical industry, respectively are introduced to determine the benefits of outsourcing according to some criteria, such as performance evaluation of before-outsourcing and after-outsourcing logistics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.658-663
• /
• 1994

The classification and coding of part for group technology applications continus to be labour intensive and time-consuming process, and therefore much effort is dedicated to the structure and creation of automatic coding systems. IN this paper, Neural networks is used to generate processes-related digit as well as part geometry-related digit of the TS code where part name is provided as input.since part name, which is appropriately designated, provides much information about part geometry and manufacturing processes. THe developed GT recommendation system is integrated with interactive TS coding system and database in order to handle the changes of production environment, such as the change of production part of plant. It is found to recommend codes accurately and promises to be a useful tool for consistent, reliable and convenient coding processes.

• 산업경영시스템학회지
• /
• 제22권51호
• /
• pp.117-127
• /
• 1999

Modern production control systems based on MRPⅡ (Manufacturing Resource planning) didn't solved about the capacity and lead time problems. In the past, It solved that problems under deterministic. Therefore, the problem about determination of correct lead time and finite capacity are studied continuously by researchers. Now, we need to a integrated method that is from low level to high level instead of top-down in MRP. In this research uses the MRP-C(Capacitated Material Requirement Planning) concept that is more efficient then MRP system for capacity and flexible lead time , and shows the MRP-C algorithm and the prototype.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.899-905
• /
• 2009

There are many different types of surface defects on semiconductor Integrated Chips (IC's) caused by various factors during manufacturing process, such as Scratch, Flash, Resin bleed, and Melting. These defects must be detected and classified by an inspection system for productivity improvement and effective process control. Among defects, in particular, Resin bleed and Melting are the most difficult ones to classify accurately. The brightness value and the shape of Resin bleed and Melting defects are so similar that normally it is difficult to classify the Resin bleed and Melting. In this paper, we propose a segmenting method and a set of features for detecting and classifying the Resin bleed and Melting defects.

• Journal of Multimedia Information System
• /
• 제8권1호
• /
• pp.57-60
• /
• 2021

Industry 4.0 is continuous automation by applying the latest smart technologies to traditional manufacturing industries. It means that large-scale M2M (Machine-to-Machine) communication and IoT (Internet of Things) technologies are well integrated to build efficient production systems by analyzing and diagnosing various issues without human intervention. Edge computing is widely used for M2M services that handle real-time interactions between devices at industrial machinery tool sites. Here, secure data transmission is required while interacting. Thus, this paper focused on a method of creating and maintaining secret key and security tag used for message authentication between end-devices and edge-device.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.167-174
• /
• 2004

As the networks connect the world, enterprises tend to move manufacturing activities into virtual spaces. Since different applications use different data terminology, it becomes a problem to interoperate, interchange, and manage electronic data among different systems. According to RTI, approximately one billion dollar has been being spent yearly for product data exchange and interoperability. As commercial CAD systems have brought in the concept of design feature for the sake of interoperability, terminologies of design feature need to be harmonized. In order to define design feature terminology for integration, knowledge about feature definitions of different CAD systems should be considered. STEP (Standard for the Exchange of Product model data) have attempted to solve this problem, but it defines only syntactic data representation so that semantic data integration is unattainable. In this paper, we utilize the ontology concept to build a data model of design feature which can be a semantic standard of feature definitions of CAD systems. Using feature ontology, we implement an integrated virtual database and a simple system which searches and edits design features in a semantic way. This paper proposes a methodology for integrating modeling features of CAD systems.

• Asia pacific journal of information systems
• /
• 제29권1호
• /
• pp.65-82
• /
• 2019

Technological innovations over the years have accentuated the workings in corporate- connected organizations and different application platforms. Hence, a unified management information system (MIS) that can utilize the Web and propel programming developments is required. Software agents, the latest developments in computer software technology, can be utilized to rapidly and effortlessly build integrated information systems. Consequently, 59 research papers on the use of software agents in MIS were identified from top 40 MIS journals published between 2007 and 2017. Then, we reviewed and classified all the research papers according to two categories: application fields and application categories. The application fields consisted of eight sub-groups: manufacturing, telecommunication systems, traffic and transportation management, information filtering and gathering, electronic commerce, business process management, entertainment, and medical care; whereas the application categories consisted of three sub-groups: multi-agent systems, personal assistants, and multi-agent simulation. The research papers were further divided into journal and year of publication, and journal and application field. The objective of our research was to understand the trend of the use software agent technology in MIS by examining the published research paper beside to add knowledge and content to the information system academic discipline.