• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.285-296
• /
• 2005

Reduced pressure chemical vapor deposition technology has been used to study SiGe heterostructure epitaxy and device issues, including SiGe relaxed buffers, proper control of Ge component and crystalline defects, two dimensional delta doping, and their influence on electrical properties of devices. From experiments, 2D profiles of B and P presented FWHM of 5 nm and 20 nm, respectively, and doses in 5×10/sup 11/ ∼ 3×10/sup 14/ ㎝/sup -2/ range. The results could be employed to fabricate SiGe/Si heterostructure field effect transistors with both Schottky contact and MOS structure for gate electrodes. I-V characteristics of 2D P-doped HFETs revealed normal behavior except the detrimental effect of crystalline defects created at SiGe/Si interfaces due to stress relaxation. On the contrary, sharp B-doping technology resulted in significant improvement in DC performance by 20-30 ％ in transconductance and short channel effect of SiGe HMOS. High peak concentration and mobility in 2D-doped SiGe heterostructures accompanied by remarkable improvements of electrical property illustrate feasible use for nano-sale FETs and integrated circuits for radio frequency wireless communication in particular.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.3.1-3.1
• /
• 2011

Over the past decade, the major efforts for lowering the cost of electronics has been devoted to increasing the packaging efficiency of the integrated circuits (ICs), which is defined by the ratio of all devices on system-level board compared to the area of the board, and to working on a larger but cheaper substrates. Especially, in flexible electronics, the latter has been the favorable way along with using novel nanomaterials that have excellent mechanical flexibility and electrical properties as active channel materials and conductive films. Here, the tool for achieving large area patterning is by printing methods. Although diverse printing methods have been investigated to produce highly-aligned structures of the nanomaterials with desired patterns, many require laborious processes that need to be further optimized for practical applications, showing a clear limit to the design of the nanomaterial patterns in a large scale assembly. Here, we demonstrate the alignment of highly ordered and dense silicon (Si) NW arrays to anisotropically etched micro-engraved structures using a simple evaporation process. During evaporation, entropic attraction combined with the internal flow of the NW solution induced the alignment of NWs at the corners of pre-defined structures. The assembly characteristics of the NWs were highly dependent on the polarity of the NW solutions. After complete evaporation, the aligned NW arrays were subsequently transferred onto a flexible substrate with 95% selectivity using a direct gravure printing technique. As proof-of-concept, flexible back-gated NW field effect transistors (FETs) were fabricated. The fabricated FETs had an effective hole mobility of 0.17 $cm2/V{\cdot}s$ and an on/off ratio of ${\sim}1.4{\times}104$. These results demonstrate that our NW gravure printing technique is a simple and effective method that can be used to fabricate high-performance flexible electronics based on inorganic materials.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.661-673
• /
• 2020

The quarter-core simulation of BEAVRS Cycle 2 depletion benchmark has been conducted using the MCS/CTF coupling system. MCS/CTF is a cycle-wise Picard iteration based inner-coupling code system, which couples sub-channel T/H (thermal/hydraulic) code CTF as a T/H solver in Monte Carlo neutron transport code MCS. This coupling code system has been previously applied in the BEAVRS benchmark Cycle 1 full-core simulation. The Cycle 2 depletion has been performed with T/H feedback based on the spent fuel materials composition pre-generated by the Cycle 1 depletion simulation using refueling capability of MCS code. Meanwhile, the MCS internal one-dimension T/H solver (MCS/TH1D) has been also applied in the simulation as the reference. In this paper, an analysis of the detailed criticality boron concentration and the axially integrated assembly-wise detector signals will be presented and compared with measured data based on the real operating physical conditions. Moreover, the MCS/CTF simulated results for neutronics and T/H parameters will be also compared to MCS/TH1D to figure out their difference, which proves the practical application of MCS into the BEAVRS benchmark two-cycle depletion simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.499-509
• /
• 2005

The capacity of Satellite DMB(Digital Multimedia Broadcasting) system is limited mainly by the interference. So, to achieve the expected performance of Satellite DMB system and to minimize the interference from other Satellite DMB system, ACI(Adjacent Channel Interference) should be considered carefully. Satellite DMB system uses the Gap-filler for effective transmission in terrestrial environment, and the Gap-filler can use direct amplification or frequency conversion to satisfy the specific requirements. Therefore, amplified signal causes several effects on interference between System A(Eureka 147 DAB) and System E(ISDB : Integrated services Digital Broadcasting). In this paper, by using the outcome of system-level simulation considering the results of link-level simulation, we analyze the interferences between System A and System E under practical situation based on the exact parameters of ITU-R BO. 1130-4. We also propose the appropriate level of guard band and Cell Radius to optimize system capacity by adapting the spectrum mask given in the spec. and utilizing the interference analysis between System A and System E.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.33-36
• /
• 2009

A new hybrid silicon thin-film transistor (TFT) fabrication process using the DPSS laser crystallization technique was developed in this study to realize low-temperature poly-Si (LTPS) and a-Si:H TFTs on the same substrate as a backplane of the active-matrix liquid crystal flat-panel display (AMLCD). LTPS TFTs were integrated into the peripheral area of the activematrix LCD panel for the gate driver circuit, and a-Si:H TFTs were used as a switching device of the pixel electrode in the active area. The technology was developed based on the current a-Si:H TFT fabrication process in the bottom-gate, back-channel etch-type configuration. The ion-doping and activation processes, which are required in the conventional LTPS technology, were thus not introduced, and the field effect mobility values of $4\sim5cm^2/V{\cdot}s$ and $0.5cm^2/V{\cdot}s$ for the LTPS and a-Si:H TFTs, respectively, were obtained. The application of this technology was demonstrated on the 14.1" WXGA+(1440$\times$900) AMLCD panel, and a smaller area, lower power consumption, higher reliability, and lower photosensitivity were realized in the gate driver circuit that was fabricated in this process compared with the a-Si:H TFT gate driver integration circuit

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.14-24
• /
• 2006

The terrestrial-DMB (T-DMB) provides one-way broadcasting service in intial phase and two-way interactive data services through a return channel of mobile communications network are commercialized recently. The possible evolution of the T-DMB will be fully convergence between the T-DMB and other communication services such as telematics, RFID and so on. From this evolution point of view, a framework should be defined for supporting telematics and RFID applications on T-BMB platform. In this paper, we propose an integrated service model that could support RFID application services on the interactive T-DMB. To realize the model, we design a service scenario, a network reference model, functionalities of each entity, a data transmission mechanism messages, and coding rules. The service model could allow users to support the identical RFID application services over the T-DMB network even if T-DMB terminal doesn't have RFID reader capability. In addition, in the case for providing the interactive TTI(Traffic and Travel Information)service, users could utilize the current location based RFID application service using by the TPEG-Location application that forms the basis of user location referencing. The messages structure is designed by following TPEG standardization

• The Journal of Internal Korean Medicine
• /
• v.33 no.2
• /
• pp.172-179
• /
• 2012

Objectives : This study was designed to quantify the characteristics, main diagnosis and complications in the intensive care unit (ICU) at an Oriental Medical Hospital. Methods : The medical records of 44 patients admitted to the ICU at Kyunghee Oriental Medical Hospital between January 1, 2011 and December 31, 2011 were reviewed. Basic characteristics of patients, admission channel, main diagnosis, east-western medical therapy, mortality, and complications were investigated retrospectively based on medical notes. Results : 1. The total number of patients was 44. Males were 63.6%, females 36.3%. Average admission days was 15.9. 2. The most frequent age group is eighties, 38.6%. 3. The most frequent disease is cerebrovascular disease, 61.3%. 4. The medical therapy done after admission to ICU was intubation. Central vein insertion was performed next, followed by Foley's catheter insertion, ventilator, tracheostomy, nasogastric intubation, and thoracentesis in order. The proportion of Oriental medical treatment provided to the patients of ICU was as follows: herbal medication only 6.8%; herbal medication plus acupuncture 31.8%; herbal medication, acupuncture electro-acupuncture, plus subcutaneous acupuncture 2.3%; and none 27.3%. 5. The number of cases of complications occurred since ICU admission was 18. The most frequently observed complication was infection, including 6 cases of pneumonia and 4 cases of urinary tract infection. Conclusions : We suggest that ICUs of Oriental medical hospitals need to be managed effectively to treat diseases including cerebrovascular disease and prevent complications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.671-677
• /
• 2010

In the present study, we designed a microfluidic platform for generating monodisperse droplets with diameters ranging from hundreds of nanometers to several micrometers. To generate fine droplets, T-junction and flow-focusing geometry are integrated into the microfluidic channel. Relatively large aqueous droplets are generated at the upstream T-junction and transported to the flow-focusing geometry, where each droplet is broken into smaller droplets of the desired size by the action of pressure and viscous stress. In this configuration, the flow rate of the inner fluid can be made very low, and the ratio of the inner- and outer-fluid flow rates in the flow-focusing region can be made very high. It has been shown that the present microfluidic device can generate droplets with diameters of approximately $1\;{\mu}m$ (standard deviation: <3%).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.9-16
• /
• 2005

In this paper, we focus on supporting the convergence of broadcasting and communication in home network systems with E-PON based home gateway. We propose a new architecture to provide broadcasting and data services in integrated home network using overlay transport mechanism in access network and If multicast techniques of IGMP and IGMP snooping in home network. We also detail a set of mechanisms and procedures for home broadcasting service through the home gateway system. Our new scheme is composed of three parts: a) an overlay transmission model of video broadcasting signals (satellite and/or cable TV) and Internet data, b) to select a specific video broadcasting channel and to make of the selected video broadcasting stream into IP multicast packets in tuner/conversion module using multiple tuner system and c) to transfer the converted If multicast packets to L2 switch of home gateway's core module and to send them out to target port(s) by L2 multicast using IGMP snooping.