• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.165-172
• /
• 2012

Integrated-optic asymmetric Mach-Zehnder interferometer at $1.3{\mu}m$ wavelength and segmented electrode structure were designed and fabricated as a sensing part for the electric-field measurement system. The device was simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides and lumped-type electrodes. Almost half-maximum power transmission was observed for asymmetric interferometers with ${\pi}/2$ intrinsic phase difference. Expected experimental measurements were observed for 1KHz electrical signal bandwidth.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2016

We have demonstrated a $Ti:LiNbO_3$ electro-optic electric-field sensors utilizing a $1{\times}2$ Y-fed balanced-bridge Mach-Zehnder interferometric (YBB-MZI) modulator which uses a 3-dB directional coupler at the output and dipole patch antenna. The operation and design were proved by the BPM simulation. A dc switching voltage of ~16.6 V and an extinction ratio of ~14.7 dB are observed at a wavelength of $1.3{\mu}m$. For a 20 dBm rf power, the minimum detectable electric-fields are ~1.12 V/m and ~3.3 V/m corresponding to a dynamic range of about ~22 dB and ~18 dB at frequencies 10 MHz and 50 MHz, respectively. The sensors exhibit almost linear response for the applied electric-field intensity from 0.29 V/m to 29.8 V/m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.977-985
• /
• 2021

The LiDAR sensor is attracting attention as a key sensor for autonomous driving vehicle. LiDAR sensor provides measured three-dimensional lengths within range using LASER. However, as much data is provided to the external system, it is difficult to process such data in an external system or processor of the vehicle. To resolve these issues, we develop integrated processing system for LiDAR sensor. The system is configured that client receives data from LiDAR sensor and processes data, server gathers data from clients and transmits integrated data in real-time. The test was carried out to ensure real-time processing of the system by changing the data acquisition, processing method and process driving method of process. As a result of the experiment, when receiving data from four LiDAR sensors, client and server process was operated using background or multi-core processing, the system response time of each client was about 13.2 ms and the server was about 12.6 ms.

• Journal of Biomedical Engineering Research
• /
• v.43 no.3
• /
• pp.170-176
• /
• 2022

Cell separation from a heterogenous mixture sample is an essential process for downstream analysis in biological, chemical, and clinical applications. This study demonstrates an integrated hybrid device of the viscoelastic focusing in a straight rectangular channel and subsequent size-based separation using acoustophoresis to attain high efficiency and separation tunability. For particle pre-alignment in a viscoelastic fluid, the flow rate higher than 10 μl/min was required. Surface acoustic wave-based lateral migration of particles with different sizes (13 and 27 ㎛) was examined at various applied voltages and flow rate conditions. Therefore, the flow rate of 100 μl/min and the applied voltage of 20 V_pp can be used for size-based particle separation.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.152-161
• /
• 2023

Modern people live a life connected with the real world and the virtual world by relying on the new media of enterprises and social consumption led by innovative technologies. In this environment, virtual influencers actively communicate with consumers and build relationships through social media, which is a new marketing tool that has attracted widespread attention. From a business perspective, it is necessary to have a solid understanding of this phenomenon, and then explore communication strategies to effectively develop virtual influencers. To investigate followers' preference for virtual influencers, this study employs the Q-method, which studies human subjective attributes, an empirical research effort to uncover complex issues in human subjectivity. To determine the factors that trigger people's voluntary and active practice and the preference degree of virtual influencers, the Q method is implemented to examine human subjectivity, thoughts and attitudes. According to the results of this study, virtual influencers are a new group of idols full of vitality. The interviews found that there are still many virtual influencers who do not know about followers, but each type can be clearly understood through the intuitive understanding of the interviewees. Divided out, type 1 one egoideal virtual influencers aim to represent an idealized version of the creator or target audience. Embodies ideal physical characteristics, personality or lifestyle desired by the audience. Type 2 is charismatic and attractive, and has the characteristics of most virtual influencers. It is suggested that it can be developed into a potential type, doing brand cooperation, and content production on social media platforms. Type 3: Game animation, derived from the image of characters in games or comics, with stylized features and energetic personalities, which can be integrated into games or entertainment experiences. Type 4 development potential type is the most successful type among virtual imagers, and it is also the purpose of marketing virtual influencers. It is essential that brand endorsement on social media platforms, integrated marketing, and driving advertising traffic. It is recommended to improve production technology to reduce investment costs.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1293-1293
• /
• 2024

Virtual reality (VR) is increasingly utilized in the construction industry for diverse applications. Immersive virtual reality (IVR) offers practical experiences and educational opportunities for workers, enhancing productivity and safety. Efforts to optimize IVR involve analyzing biometric responses to monitor concentration, assess learning efficiency, and deliver personalized content. However, IVR faces challenges such as high production costs and prolonged production periods. Additionally, integrating biometric response recording into IVR experiences requires separate modules, further extending production timelines. To address these challenges, an integrated platform is necessary to streamline IVR production, user experience, and biometric response setup and recording. This study introduces such a platform designed to enhance the efficacy of IVR experiences through real-time biometric response analysis. The proposed platform comprises three main processes: (i) IVR content production using Unity; (ii) biometric response definition; and (iii) IVR content experience accompanied by generated logs for biometric responses. Firstly, IVR content production using Unity involves the development of IVR environments and scenarios. The platform incorporates diverse 3D models, including urban landscapes, building elements, and furniture, as the basis for IVR environments. Scenarios are constructed by integrating events into these environments, triggered by conditions such as reaching specific locations, the passage of time, or user interactions. Upon event activation, participants are presented with description UIs, quiz UIs, or route guidance, facilitating engagement and progression through interaction. Secondly, biometric responses encompass eye tracking and EEG. Eye tracking captures pupil diameter and fixation status on Areas of Interest (AOI), defined during IVR content production. EEG recording options include signals from each channel by default, as well as frequency-specific signals and EEG metrics such as attention, stress, fatigue, valence, and arousal. The platform supports the addition of new EEG metrics, enhancing customization and recording capabilities. Lastly, IVR content can be experienced alongside generated logs for biometric responses. The dataset enables monitoring and evaluation of participants' learning performance during IVR experiences, with the potential to enhance worker safety and productivity through immersive practical training and education.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.251-257
• /
• 2012

Human body communication means transmitting and receiving data through human body medium or through free space along with the human body skin. Electric field distribution around the human body between the transmitter and the receiver were calculated at five different frequencies with 5 MHz interval between 10 MHz and 30 MHz. Commercial electromagnetic simulation tool was used for the calculation of E-field distributions applying the Korean standard male model including 29 different kinds of human tissues. After calculating specific absorption rate(SAR) values on back of the hand, it was compared with International Commission on Non-Ionizing Radiation Protection(ICNIRP) human protection guideline. While conductivities(${\sigma}$) and relative permittivities(${\varepsilon}_r$) of the human tissues for each frequency were input as the analyzing parameters, electric field intensities near both hands were integrated along the integral line between the nearby electrodes for the calculation of the transmitting and receiving voltages whose ratio was defined as channel loss. The calculated channel losses were about ($75{\pm}1$) dB and showed nearly flat response all through the evaluated frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.207-214
• /
• 2005

This paper presents a channel structure for promising high performance pseudomorphic high electron mobility transistor(pHEMT) switching device for design and fabricating of microwave control circuits, such as switches, phase shifters, attenuators, limiters, for application in personal mobile communication systems. Using the designed epitaxial channel layer structure and ETRI's $0.5\mu$m pHEMT switch process, single pole double throw (SPDT) Tx/Rx monolithic microwave integrated circuit (MMIC) switch was fabricated for 2.4 GHz and 5 GHz band wireless local area network (WLAN) systems. The SPDT switch exhibits a low insertion loss of 0.849 dB, high isolation of 32.638 dB, return loss of 11.006 dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V These performances are enough for an application to 5 GHz band WLAN systems.