• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.5
• /
• pp.601-611
• /
• 2011

This research evaluates the availability of consumers moving to integrated multi channels by a target analysis on the integrated online channel and verifies the possibility of a synergy effect created by the expansion of an integrated online channel. The objectives are to define the scope of benefits desired in fast fashion and online shopping, compare the desired benefits of fast fashion consumers, online shopping consumers and fast fashion, and online shopping consumers, investigate the acceptance intention of the integrated online channel of consumers, and verity its relationship with the desired benefits. As a result, all consumers indicate the desire to pursue social recognition, pleasure, individuality, economic and convenience orientation, and fashion-innovativeness through shopping activities. In addition, there were differences in the mean of social recognition benefit individuality benefit, economical and convenience orientation benefit, and fashion-innovativeness benefit. Lastly, the acceptance intention of the integrated online channel was significant in all groups and the desired benefits that affect the acceptance intention of the integrated online channel were social recognition for fast fashion consumers along with pleasure and individuality for fast fashion and online shopping consumers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.566-578
• /
• 2018

In this paper, we design a segment training based individual channel estimation (STICE) scheme for the classical two-way relay network (TWRN) with multi-pair sources (MPS) and amplify-and-forward (AF). We adopt the linear minimum mean square error (LMMSE) channel estimator to minimize the mean square error (MSE) without channel estimation error, where the optimal power allocation strategy from the relay for different sources is obtained. Then the MSE gains are given with different source pairs among the proposed power allocation scheme and the existing power allocation schemes. Numerical results show that the proposed method outperforms the existing ones.

• Journal of Sensor Science and Technology
• /
• v.18 no.2
• /
• pp.154-159
• /
• 2009

This paper describes two methods - stamp-to-stick bonding and microtransfer molding - to integrate microfluidic channel into an optoelectrofluidic device for in-channel microparticle manipulation. We have demonstrated the optoelectronic microparticle manipulation in the channel-integrated optoelectrofluidic device using a liquid crystal display. As injecting a liquid sample containing $15{\mu}m$-diameter polystyrene particles into the fabricated channel, trapping and transport of individual microparticles have been successfully demonstrated. This channel-integrated optoelectrofluidic device may be useful for several in-channel applications based on the optoelectrofluidics such as optoelectronic flow control, droplet-based protein assay and bead-based immunoassay.

• Journal of Digital Convergence
• /
• v.10 no.5
• /
• pp.245-249
• /
• 2012

The rapid adoption of smartphones led to using SNS(Social Network Service) and many organizations use of SNS as a strategic tool for marketing. Utilization of SNS in the organizations separately operated each channel due to technical problems with SNS. So, the channel separations is required much more operation and management cost to organizations. In this paper, we apply to HTML5 as the web standard technology, and implement to the integrated channels, and the result showed.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.311-319
• /
• 2006

Platform operators adopted ATSC standard send only their own channel program schedule information, so in order for the viewer to see other channel information, they have to tune the channel to the other. This issue arises from the operators' lack of bandwidth and the business interest conflicts between the platform operators. This paper guides how ATSC standard could be used within Xlet based application to display other channel information through the ISG (Integrated Scheduling Guide) technology via interactive return channel services. Its own channel information can be displayed by using on-air PSIP (Program and System Information Protocol) data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.147-154
• /
• 2009

This paper presents a grating~integrated SPR (Surface Plasmon Resonance) sensor chip for simple and inexpensive biomolecule detection. The grating-integrated SPR sensor chip has two sensing channels having a nano grating for SPR coupling. An external mirror is used for multi channel SPR sensing. The present sensor chip replaces bulky and expensive optical components, such as fiber-optic switches or special shaped prisms, resulting in a simple and inexpensive wavelength modulated multi-channel SPR sensing system. We fabricate a SPR sensor chip integrated with 835 nm-pitch gratings by a micromolding technique to reduce the fabrication cost. In the experimental characterization, the refractive index sensitivity of each sensing channel is measured as $321.8{\pm}8.1nm$/RI and $514.3{\pm}8.lnm$/RI, respectively. 0.5uM of the target biomolecule (streptavidin) was detected by a $1.13{\pm}0.16nm$ shift of the SPR dip in the 10%-biotinylated sample channel, while the SPR dip in the reference channel for environmental perturbation monitoring remained at the same position. From the experimental results, multi-channel biomolecule detection capability of the present grating-integrated SPR sensor chip has been verified. On the basis of the preliminary experiments, we successfully measured the binding reaction rate for the $2\;nM{\sim}200\;nM$ monoclonal-antibiotin, thus verifying biomolecule concentration detectability of the present SPR sensor chip. The binding reaction rates measured from the present SPR sensor chip agredd well with those from a commercialized SPR sensor.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2000

Channel management is critical in designing a cellular mobile system that offers high capacity and high quality. In this paper, an integrated channel management scheme is proposed, which consists of a dynamic channel allocation scheme and an admission control scheme. The dynamic channel allocation scheme allocates a call request the channel which minimizes the impact on its interfering cell, and consists of two types of channel allocation strategies : nominal channel allocation strategy and non-nominal channel allocation strategy. The admission control scheme named the variable cutoff priority scheme reserves some frequency channels for handoff cells in each cell the number of which varies according to the blocking probability of handoff class in that cell. Computationl tests are performed to evaluate the performance of the proposed scheme in terms of overall blocking probability, defined by the weighted value of the blocking probabilities of new calls and handoff calls. The results show that the proposed scheme yields better performance than other compared schemes.

• Asia Marketing Journal
• /
• v.19 no.4
• /
• pp.37-59
• /
• 2018

This study investigates the effects of the distribution channel structure on quality decisions under duopoly competition. I considers a set-up in which two retailers compete on product quality and retail price. In the set-up, the integrated retailer has the power to determine the quality of its exclusive product, while the decentralized retailer does not. For the decentralized retailer, the supplier determines product quality. I find that asymmetric pairs of a decentralized channel by one retailer and an integrated channel by the other retailer can be a Nash equilibrium in a simultaneous-channel-choice model. The two retailers select different levels of quality, and this quality competition benefits retailers by softening price competition. In a sequential-channel-choice model, I find that the leader can obtain a first-mover advantage. From the perspective of the supplier, which can decide the distribution channel structure and level of quality, both suppliers choose the decentralized channel in equilibrium.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.956-970
• /
• 2015

In this paper, we study the design of network coding for the generalized transmit scheme in multiple input multiple output Y channel, where K users wish to exchange specified and shared information with each other within two slots. Signal space alignment at each user and the relay is carefully constructed to ensure that the signals from the same user pair are grouped together. The cross-pair interference can be canceled during both multiple accessing channel phase and broadcasting channel phase. The proposed signal processing scheme achieves the degrees of freedom of ${\eta}(K)=K^2$ with fewer user antennas.