• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.589-604
• /
• 2016

Kenya has recently experienced worrying collapse of buildings during construction largely attributable to the poor quality of in-situ concrete and poor workmanship. The situation in the country is further compounded by rapid deterioration of infrastructure, hence necessitating the development of alternative structural systems such as concrete filled unplasticized poly vinyl chloride (UPVC) tubes as columns. The work herein adds on to the very limited and scanty work on use of UPVC tubes in construction. This study presents the findings of experimental and analytical work which investigated the structural response of composite concrete filled UPVC tubes under compressive load regime. UPVC pipes are cheaper than steel tubes and can be used as formwork during construction and thereafter as an integral part of column. Key variables in this study included the strength of infill concrete, the length to diameter ratio (L/D) of the plastic tube, as well as the diameter to thickness ratio (D/2t) of the plastic tube. Plastic tubes having varying diameters and heights were used to confine concrete of different strengths. Results obtained in the study clearly demonstrate the effectiveness of UPVC tubes as a confining medium for infill concrete, attributable to enhanced composite interaction between the UPVC tube and infill concrete medium. It was determined that compressive strength of the composite column specimens increased with increased concrete strength while the same decreased with increased column height, albeit by a small margin since all the columns considered were short columns. Most importantly, the experimental confined concrete strength increased significantly when compared to unconfined concrete strength; the strength increased between 1.18 to 3.65 times the unconfined strength. It was noted that lower strength infill concrete had the highest confined strength possibly due to enhanced composite interaction with the confining UPVC tube. The study further proposes an analytical model for the determination of confined strength of concrete.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2358-2368
• /
• 2011

Density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations, employing the B3LYP method and the LANL2DZ, 6-31G$^*$(LANL2DZ for Tc), 6-31G$^*$(cc-pVDZ-pp for Tc) and DGDZVP basis sets, have been performed to investigate the electronic structures and absorption spectra of the technetium-99m-labeled methylenediphosphonate ($^{99m}Tc$-MDP) complex of the simplest diphosphonate ligand. The bonding situations and natural bond orbital compositions were studied by the Mulliken population analysis (MPA) and natural bond orbital (NBO) analysis. The results indicate that the ${\sigma}$ and ${\pi}$ contributions to the Tc-O bonds are strongly polarized towards the oxygen atoms and the ionic contribution to the Tc-O bonding is larger than the covalent contribution. The electronic transitions investigated by TDDFT calculations and molecular orbital analyses show that the origin of all absorption bands is ascribed to the ligand-to-metal charge transfer (LMCT) character. The solvent effect on the electronic structures and absorption spectra has also been studied by performing DFT and TDDFT calculations at the B3LYP/6-31G$^*$(cc-pVDZ-pp for Tc) level with the integral equation formalism polarized continuum model (IEFPCM) in different media. It is found that the absorption spectra display blue shift in different extents with the increase of solvent polarity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5647-5654
• /
• 2015

Gall bladder cancer (GBC) is a gastro-intestinal cancer with high prevalence among north Indian women. Platelet derived growth factor-B (PDGFB) and human epidermal growth factor receptor-2 (HER2) may play roles in the etiology of GBC through the inflammation-hyperplasia-dysplasia-carcinoma pathway. To study the association of PDGFB and HER2 polymorphisms with risk of GBC, 200 cases and 300 controls were considered. PDGFB +286A>G and +1135A>C polymorphisms were investigated with an amplification refractory mutation system and the HER2 $Ile^{655}Val$ polymorphism by restriction fragment length polymorphism. Significant risk associations for PDGFB +286 GG (OR=5.25) and PDGFB +1135 CC (OR=3.19) genotypes were observed for GBC. Gender wise stratification revealed susceptibility for recessive models of PDGFB +1135A>C (OR=3.00) and HER2 $Ile^{655}Val$ (OR=2.52) polymorphisms among female GBC cases. GBC cases with gall stones were predisposed to homozygous +286 GG and +1135 CC genotypes. Significant risk associations were found for ACIle (OR=1.48), GAVal (OR=1.70), GAIle (OR=2.00) haplotypes with GBC cases and GCIle haplotype with female GBC cases (OR=10.37, P=<0.0001). Pair-wise linkage disequilibrium revealed negative associations among variant alleles. On multi-dimensional reduction analysis, a three factor model revealed significant gene-gene interaction for PDGFB +286A>G, PDGFB +1135A>C and HER2 Ile165Val SNPs with GBC. Protein-protein interaction showed significant association of PDGFB and HER2 with the epidermal growth factor receptor signaling pathway.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.935-939
• /
• 2015

This paper describes sensorless speed control of brushless DC motors by using direct torque control. Direct torque control offers fast torque response, robust specification of parameter changes, and lower hardware and processing costs compared to vector-controlled drives. In this paper, the current error compensation method is applied to the sensorless speed control of a brushless DC motor. Through this control technique, the controlled stator voltage is applied to the brushless DC motor such that the error between the stator currents in the mathematical model and the actual motor can be forced to decay to zero as time proceeds, and therefore, the motor speed approaches the setting value. This paper discusses the composition of the controller, which can carry out robust speed control without any proportional-integral (PI) controllers. The simulation results show that the control system has good dynamic speed and load responses at wide ranges of speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.897-904
• /
• 2012

The rifling design problem has continuous-type shape variables and an integral number of riflings. In addition, it requires considerable time for analysis because its behavior should be described by a nonlinear finite element model (FEM). Therefore, this study presents an efficient design process for rifling based on a design of experiment (DOE) approach. First, Bose's orthogonal array is used to represent 25 runs for four design variables including three shape variables and one integer variable. Then, nonlinear FE analyses are performed. Next, to minimize the bullet resistance without affecting the bullet velocity and bullet rotational angle immediately before a bullet leaves the gun barrel, a what-if design is performed. In the proposed what-if design, a functional including the design objective and constraints is constructed and effect analysis is performed by using the functional. It is found that the new design obtained from the what-if design shows better results than the current one.

• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.391-402
• /
• 2017

In this paper, a new nonlocal trigonometric shear deformation theory is proposed for thermal buckling response of nanosize functionally graded (FG) nano-plates resting on two-parameter elastic foundation under various types of thermal environments. This theory uses for the first time, undetermined integral variables and it contains only four unknowns, that is even less than the first shear deformation theory (FSDT). It is considered that the FG nano-plate is exposed to uniform, linear and sinusoidal temperature rises. Mori-Tanaka model is utilized to define the gradually variation of material properties along the plate thickness. Nonlocal elasticity theory of Eringen is employed to capture the size influences. Through the stationary potential energy the governing equations are derived for a refined nonlocal four-variable shear deformation plate theory and then solved analytically. A variety of examples is proposed to demonstrate the importance of elastic foundation parameters, various temperature fields, nonlocality, material composition, aspect and side-to-thickness ratios on critical stability temperatures of FG nano-plate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.292-297
• /
• 2014

As a Social Network Service (SNS) has become an integral part of our everyday lives, millions of users can express their opinion and share information regardless of time and place. Hence sentiment analysis using micro-blogs has been studied in various field to know people's opinion on particular topics. Most of previous researches on movie reviews consider only positive and negative sentiment and use it to predict movie rating. As people feel not only positive and negative but also various emotion, the sentiment that people feel while watching a movie need to be classified in more detail to extract more information than personal preference. We measure sentiment distributions of each movie from tweets according to the Thayer's model. Then, we find similar movies by calculating similarity between each sentiment distributions. Through the experiments, we verify that our method using micro-blogs performs better than using only genre information of movies.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.680-685
• /
• 2006

Bridges are an integral part of Transportation that is always open to traffic.To effectively manage bridges today, more needs to be done to assess the day-to-day condition and behavior of bridges, and the deterioration rates of their components, so that efficient and proactive measures can be taken. Conventional methods consumemore time and they lack flexibility to reach all locations in high convoluted structures which most bridges offer. Instead, this work uses a new concept of robot, termed as Bridge inspecting robot, which, as its name suggests, possesses superior ability to flex, reach, and approach all points on the bridge. This study also provides economical feasibility model for the same and a comparison with existing bridge inspection and automated inspection work. Finally, we have uncovered few issues and did not analyze some information because of limitation to data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.459-468
• /
• 1984

The currently accepted model of membrane structure proposes a dynamic, asymmetric lipid matrix of phospholipids and cholesterol with globular proteins embedded across the membrane to various degrees. Most phospholipids are in the bilayer arrangement and also closely associated with integral membrane proteins or loosely associated with peripheral proteins. Biological functions of membrane, such as membrane-bound enzyme functions and transport systems, are influenced by the membrane physical properties, which are determined by fatty acid composition of phospholipids, polar head group composition and membrane cholesterol content. Polar and non-polar region of the phospholipid molecule can interact, with changes in the conformation of a membrane-associated protein altering either its catalytic activity or the protein's interaction with other membrane proteins. Mammalian dietary studies attempted to change the lipid composition of a few cell membranes have shown comparisons, using essential fatty acid-deficient diets. In recent years, Clandinin and a few other workers have pioneered the study proving the influence of dietary fat fed in a nutritionally complete diet on composition of phospholipid classes of cell membrane. Modulation caused by diet fat was rapid and reversible in phospholipid fatty acyl composition of membranes of cardiac mitochondria, liver cell, brain synaptosome and lymphocytes. These changes were at the same time, accompanied by variety of membrane associated functions controlled by membrane-bound enzymes, tranporter and receptor proteins. The findings suggest the basic concept of the necessity of dietary fatty acid balance if consistency of optimal membrane structural lipid composition is to be maintained, as well as the overall inadequacy of describing the nutritional-biochemical quality of a dietary fat solely by its content of linoleic acid. Furthermore, they give light on the possible application to clinical and preventive medicine.

• School Mathematics
• /
• v.18 no.4
• /
• pp.881-901
• /
• 2016

This study is about investigating students' recognition and expression on relationship of 'time, distance, speed' via teaching experiment. In this process, students showed not only a change in perception of the relationship of 'time, distance, speed' but also recognizing the average speed as a viewpoint of the slope of the line connecting the end points of the interval in the distance function as well as another way of perceiving average speed of a height of a rectangle. In this process, the study shows the scene of expanding the relation of 'distance = time ${\times}$ speed' to 'distance = time ${\times}$ average speed', and also the student who makes the continuous reasoning shows the possibility of constructing a new function that can explain the change of the primitive function by allocating the average rate of change to the interval. Although this study was conducted with a limited number of students, this study suggests some implications through the observation of relationship of 'time, distance, speed' the students'. We hope that these results will be the starting point for various studies for constructing the integral learning model in the future.