• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.671-678
• /
• 2009

Recently, there have been some researches in the equipment fault detection based on shock and vibration information. Most research of them is based on shock and vibration monitoring to determine the equipment fault or not. Different with engine fault detection based on shock and vibration information we focus on detection of engine for boat and system control. First, it use the duplicated-checking method for shock and vibration information to determine the engine fault or not. If there is a fault happened, we use the integral to determine the error engine shock wave width and detect the fault area. On the other hand, we use the engine trend analysis and standard of safety engine to implement the shock and vibration information database. Our simulation results show that the probability of engine fault determination is 98% and the probability of engine fault detection is 72%

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.516-526
• /
• 2016

This paper introduces a hovering-type autonomous underwater vehicle (AUV) developed for research and its fundamental motion performance results obtained by simulation and field test. The AUV can control its motion in four degrees of freedom (DOF) by means of its horizontal and vertical thrusters, and it is designed to provide a test-bed that facilitates ease of operation and experimentation. Prior to the field tests, six DOF equations of motion are developed, and a simulation program is constructed using MATLAB and Simulink to verify the essential motion performance of the designed vehicle. Furthermore, a proportional-integral-derivative (PID) controller and fuzzy PID controller are designed, and their performances are verified through a simulation. Field tests are performed to verify the motion performance of the AUV; way-point tracking is executed by the PID and fuzzy PID controllers. The results confirmed appropriate control performance under current disturbances.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.127-136
• /
• 2010

Emerging technologies such as four-dimensional computed tomography (4D CT) is expected to allow clinicians to accurately model interfractional motion and to quantitatively estimate internal target volumes (ITVs) for radiation therapy involving moving targets. A need exists for a 4D radiation therapy quality assurance (QA) device that can incorporate and analyze the patient specific intrafractional motion as it relate to dose delivery and respiratory gating. We built a 4D RT prototype device and analyzed the patient-specific 4D radiation therapy QA for 2D dose distributions successfully. With more improvements, the 4D RT QA prototype device could be an integral part of a 4D RT decision process to confirm the dose delivery.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.165-172
• /
• 2016

An experimental study of the thermal-hydraulic characteristics of passive safety systems (PSSs) was conducted using a system-integrated modular advanced reactor-integral test loop (SMART-ITL). The present passive safety injection system for the SMART-ITL consists of one train with the core makeup tank (CMT), the safety injection tank, and the automatic depressurization system. The objective of this study is to investigate the injection effect of the PSS on the small-break loss-of-coolant accident (SBLOCA) scenario for a 0.4 inch line break in the safety-injection system (SIS). The steady-state condition was maintained for 746 seconds before the break. When the major parameters of the target value and test results were compared, most of the thermal-hydraulic parameters agreed closely with each other. The water level of the reactor pressure vessel (RPV) was maintained higher than that of the fuel assembly plate during the transient, for the present CMT and safety injection tank (SIT) flow rate conditions. It can be seen that the capability of an emergency core cooling system is sufficient during the transient with SMART passive SISs.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.761-772
• /
• 2008

The object of this study is to develop the model that solves the numerically difficult problems in hydraulic engineering and to demonstrate the applicability of this model by means of various test examples, such as, verification in the gradually varied unsteady condition, three steady flow problems with the change of bottom slope with exact solution, and frictional bed with analytical solution. The governing equation of this model is the integral form of the Saint-Venant equation satisfying the conservation laws, and finite volume method with the Riemann solver is used. The evaluation of the mass and momentum flux with the HLL Riemann approximate solver is executed. MUSCL-Hancock scheme is used to achieve the second order accuracy in space and time. This study introduce the new and simple technique to discretize the source terms of gravity and hydrostatic pressure force due to longitudinal width variation for the balance of quantity between nonlinear flux and source terms. The results show that the developed model's implementation is accurate, robust and highly stable in various flow conditions with source terms, and this model is reliable for one-dimensional applications in hydraulic engineering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4322-4327
• /
• 2011

This study was conducted to analyze the influences of older volunteer activity. In detail, Administered on girl's maddle school students with the program's purpose on encouragement of positive career development. The study sample was taken from 30 students attending Y girl's middle school in Gyeonggi province, all of whom were regular volunteers at a near by rest home. The contents of the study and apparatus alike incorporated the use of a CAMI and CDS employed as a means of observing the changes before and after older volunteer activity experience in relation to five sub factors and career decision level. The data were analyzed by t-test using the SPSS Program. The results were as follows: First, it appears that older volunteer activity, in general, partial effect of improving a girl's middle school students' career attitude maturity. Second, it appears that older volunteer activity, improving effect a girl's middle school students' career decision level. Third, a girl's middle school students' career attitude maturity and career decision level had positive to advance more in particular in cases where the students' family also participated in older volunteer activity. As observed by the above results, a older volunteer activity experience should be an integral to a girl's middle school students' career education program plan as an effective means of enhancing their career attitude maturity and career decision level.

• Development and Reproduction
• /
• v.20 no.4
• /
• pp.289-296
• /
• 2016

This report describes the sex differentiation of the Korean rose bitterling, Rhodeus uyekii, from hatching to 170 days post-hatch (DPH) in relation to total length (TL), body weight (BW), and integral water temperature (IWT). The growth curve of TL from just hatching to 83 DPH was $5.144e^{0.045t}$ ($R^2=0.961$; t, time), and that of BW was $2.398e^{0.086t}$ ($R^2=0.725$). Primordial germ cells (PGCs) were observed at 17 DPH (7.9 mm TL, 3.74 mg BW, $374^{\circ}C$ IWT), and thereafter began to protrude into the peritoneal cavity. At 21 DPH ($9.2{\pm}0.14mm$ TL, $4.8{\pm}0.07mg$ BW, $462^{\circ}C$ IWT), some PGCs contained condensed chromatin and oocyte were observed in meiotic prophase. In contrast to the ovaries, which grew gradually after sexual differentiation, testes began multiplying at 25 DPH (10.1 mm TL, 5.42 mg BW, $550^{\circ}C$ IWT), when testicular differentiation was first identified, and multiplied continuously thereafter. At 33 DPH (11.2 mm TL, 10.5 mg BW, $726^{\circ}C$ IWT), the developing testes contained spermatogonia that exhibited mitotic activity. No spermatocyte or sperm cell was observed until 83 DPH (18.9 TL, 48.2 mg BW, $1,826^{\circ}C$ IWT). At 170 DPH (32.5 mm TL, 270.1 mg BW, $3,740^{\circ}C$ IWT), which was the end point of this study, the mature ovaries showed germinal vesicle breakdown, while the mature testes contained observable spermatocytes and sperm cells. These results allow us to identify the sex differentiation type of the Korean rose bitterling as differentiated gonochoristic.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.677-696
• /
• 2017

Cartoons and consequently animation are an effective way of visualizing futuristic scenarios. Here we look at how animation is becoming ubiquitous and an integral part of this future today: the cybernetic and mediated society that we are being transformed into. Animation therefore becomes a form of speech between humans and this networked reality, either as an interface or as representation that gives temporal form to objects. Animation or specifically animated films usually are associated with character based short and feature films, fiction or nonfiction. However animation is not constricted to traditional cinematic formats and language, the same way that design and communication have become treated as separate fields, however according to $Vil{\acute{e}}m$ Flusser they aren't. The same premise can be applied to animation in a networked culture: Animation has become an intrinsic to design processes and products - as in motion graphics, interface design and three-dimensional visualization. Video-games, virtual reality, map based apps and social networks constitute layers of an expanded universe that embodies our network based culture. They are products of design and media disciplines that are increasingly relying on animation as a universal language suited to multi-cultural interactions carried in digital ambients. In this sense animation becomes a discourse, the same way as Roland Barthes describes myth as a type of speech. With the objective of exploring the role of animation as a design tool, the proposed research intends to develop transmedia creative visual strategies using animation both as narrative and as an user interface.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.2
• /
• pp.51-57
• /
• 2011

Pilon fractures involving distal tibia remain one of the most difficult therapeutic challenges that confront the orthopedic surgeons because of associated soft tissue injury is common. To introduce and describe the diagnosis, current treatment, results and complications of the pilon fractures. In initial assessment, the correct evaluation of the fracture type through radiographic checkup and examination of the soft tissue envelope is needed to decide appropriate treatment planning of pilon fractures. Even though Ruedi and Allgower reported 74% good and excellent results with primary open reduction and internal fixation, recently the second staged treatment of pilon fractures is preferred to orthopedic traumatologist because of the soft tissue problem is common after primary open reduction and internal fixation. The components of the first stage are focused primarily on stabilization of the soft tissue envelope. If fibula is fractured, fibular open reduction and internal fixation is integral part of initial management for reducing the majority of tibial deformities. Ankle-spanning temporary external fixator is used to restore limb alignment and displaced intraarticular fragments through ligamentotaxis and distraction. And the second stage, definitive open reduction and internal fixation of the tibial component, is undertaken when the soft tissue injury has resolved and no infection sign is seen on pin site of external fixator. The goals of definitive internal fixation should include absolute stability and interfragmentary compression of reduced articular segments, stable fixation of the articular segment to the tibial diaphysis, and restoration of coronal, transverse, and sagittal plane alignments. The location, rigidity, and kinds of the implants are based on each individual fractures. The conventional plate fixation has more advantages in anatomical reduction of intraarticular fractures than locking compression plate. But it has more complications as infection, delayed union and nonunion. The locking compression plate fixation provides greater stability and lesser wound problem than conventional implants. But the locking compression plate remains poorly defined for intraarticular fractures of the distal tibia. Active, active assisted, passive range of motion of the ankle is recommended when postoperative rehabilitation is started. Splinting with the foot in neutral is continued until suture is removed at the 2~3 weeks and weight bearing is delayed for approximately 12 weeks. The recognition of the soft tissue injury has evolved as a critical component of the management of pilon fractures. At this point, the second staged treatment of pilon fractures is good treatment option because of it is designed to promote recovery of the soft tissue envelope in first stage operation and get a good result in definitive reduction and stabilization of the articular surface and axial alignment in second stage operation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.63-74
• /
• 2005

The cinema costume designers carry out the creative works in a different way from the commercial fashion designers generating the new trends by season or year for a number of people. Costumes created by the cinema costume designers are for the people acting in the film screens such as heroes, heroines or extras. The cinema costume designers should not miss the overall flow of a cinema. Moreover, the prominent designers have to devise the costumes livening up every scene. Most cinemas with the prudent interests and attention on the costumes are favored by the public and gain the commercial success. In particular, the cinemas emphasize the visual effects such as setting, lighting and computer graphics and require the substantial budgets for preparing the costumes regardless of genres, while all other industrial fields will be the same. Such efforts are to deliver the meaning and aesthetics that the cinemas intend to show through the designs, colors and textures of costumes closed up in each scene. The costumes in cinemas are another linguistic system and have the symbolic form of compound and meaningful communication used by the directors. The costume design is required to produce the costumes that liven up the characteristics of heroes or heroines as well as to fit for the general artistic effects of films. Moreover, it has to express the characters in the films using the costumes suitable for the film genres. Cinema costumes are defined and refined, and the process can be angst-ridden. Each frame of film is a canvas and has its own proscenuium. Every garment worn in a theatrical production is a costume. Before an actor speaks, his wardrobe has already spoken for him. From the most obvious and flamboyant show clothing, to contemporary clothes using subtle design language, costume design plays an integral part in every film production. Costume design is a vital tool for storytelling. Costumes have always had enormous influence on world fashion. Costume designers are passionate storytellers, historians, social commentators, humorists, psychologists, trendsetters and magicians who can conjure glamour and codify icons. Costume designers are project managers who have to juggle ever-decreasing wardrobe budgets and battle the economic realities of film production. Costume designers are artists with pen and paper, form, fabric and the human figure.