• 설비공학논문집
• /
• 제29권10호
• /
• pp.504-514
• /
• 2017

The insulation performance of aircaps has been recognized and various studies regarding the aircap as a solution to increased building energy consumption are being carried out. However, the aircap is not durable and therefore it cannot play the role of an independent finishing material. Accordingly, the purpose of this study is to suggest an aircap wall module with improved durability through the lamination of the aircap and verify its effectiveness by evaluating its energy saving performance for lighting and air conditioning through a full-scale testbed. The conclusions of this study are as follows. 1) The aircap wall module featuring a laminated aircap that is being proposed in this study can save lighting energy due to the permeability of the aircap in comparison to previous insulating materials. 2) The aircap wall module with a laminated aircap is effective in improving heating and air-conditioning energy saving when it is more than 15 cm-thick during summer and winter in comparison to a 5 cm-thick prefabricated panel. 3) The aircap wall module featuring a laminated aircap is effective in improving lighting and heating and air-conditioning energy saving when it is 10 cm- and 5 cm-thick during summer and winter, respectively, in comparison to a 5 cm-thick prefabricated panel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.170.1-170.1
• /
• 2016

$Bi_2Te_3$ has long been studied for its excellent thermoelectric characteristics. Recently, this material has been known as a topological insulator (TI). The surface states within the bulk band gap of a TI, which are protected by the time reversal symmetry, contribute to the conduction at the surface, while the bulk is in insulating state. In contrast to the bulk defects tuning the chemical potential to the Dirac energy, the native defects near the surface are expected not to change the shape of the Fermi surface and the related spin structure. Using scanning tunneling microscopy (STM), we have systematically characterized surface or near surface defects in p- and n- doped $Bi_2Te_3$, and identified their structure by first principles calculations. In addition, bias-polarity dependences of STM images revealed the electron donor/acceptor nature of each defect. A detailed theoretical study of the surface states near the Dirac energy reveals the robustness of the Dirac point, which verifies the effectiveness of the disturbance on the backscattering from various kinds of defects.

• 대한기계학회논문집B
• /
• 제35권1호
• /
• pp.93-100
• /
• 2011

액체질소 온도부근에서 작동하는 고온초전도 케이블 시스템을 개발하기 위해서는 고온초전도 케이블 시스템에 사용되는 극저온 절연재료의 정확한 열물성 자료가 필요하다. 금속재료와 달리, 비금속 계열의 재료는 열저항이 크기 때문에 정확한 열 유입량을 측정하기 위해서는 특별한 주의가 요구된다. 본 연구에서는 극저온 냉동기를 이용하여 30K 부터 상온 사이에서 절연재료의 열전도도를 정확하게 측정할 수 있는 시스템을 개발하였다. 설계와 제작과정을 포함한 열전도도 측정 시스템을 자세하게 기술하였다. 또한 상온으로부터 침입하는 불가피한 열유입량을 최소화하기 위한 열전도도 측정 시스템의 최적화 과정을 소개한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권1호
• /
• pp.41-47
• /
• 2017

After $SF_6$, which is being used in power equipment as an insulating material, is classified as one of the 6 major greenhouse gases, the maintenance and the refinement of used $SF_6$ started to get attention. In regard to this, KEPCO Research Institute (KEPRI) is developing $SF_6$ recovery and refinement technology starting with establishing a comprehensive $SF_6$ analysis system. With the analysis system, qualitative and quantitative analyses of the purity and the impurities of $SF_6$ before and after recovery, and before and after refinement have been carried out. The analysis system is comprised of GC-DID (Gas Chromatograph -Discharge Ionization Detector) for trace impurities analysis, GC-TCD (Thermal Conductivity Detector) for analyses of $SF_6$ purity and major impurities concentration from several hundred ppm up to percent range, GC-MSD (Mass Selective Detector) for analyses of impurities not included in standard gas, FT-IR (Fourier Transform-Infrared) Spectrometer for analysis of HF and $SO_2$, and moisture analyzer for analysis of moisture below 100 ppm. With this analysis system, complete analysis method of $SF_6$ has been established. This analysis system is being used in the maintenance of power equipment and the development of $SF_6$ recovery and refinement technologies. In this paper, the analysis results of four samples - gas and liquid phase $SF_6$ samples from a $SF_6$ refinement system before and after refinement are presented.

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.221-224
• /
• 2013

Effects of ambient temperature on the ac electrical treeing and breakdown behaviors in an epoxy/layered silicate (1 wt%) were carried out in needle-plate electrode geometry. A layered silicate was exfoliated in an epoxy base resin,, using our ac electric field apparatus. To measure the treeing initiation and propagation, and the breakdown rate, constant alternating current (ac) of 10 kV (60 Hz) was applied to the specimen in a needle-plate electrode arrangement, at $30^{\circ}C$, $90^{\circ}C$ or $130^{\circ}C$ of insulating oil bath. At $30^{\circ}C$, the treeing initiation time and the breakdown time in the epoxy/layered silicate (1 wt%) system were 1.4 times higher than those of the neat epoxy resin. At $90^{\circ}C$ (lower than Tg), electrical treeing was initiated in 55 min, and propagated until 1,390 min at the speed of $0.35{\times}10^{-3}mm/min$, which was 4.4 times higher than that at $30^{\circ}C$; however, there was almost no further treeing propagation after 1,390 min. At $130^{\circ}C$ (higher than Tg), electrical treeing was initiated in 44 min, and propagated until 2,000 min at the speed of $0.96{\times}10^{-3}mm/min$. Typical branch type electrical treeing was obtained from the neat epoxy and epoxy/layered silicate at $30^{\circ}C$, while bush type treeing was observed out from the needle tip at $90^{\circ}C$ and $130^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.308-311
• /
• 2013

The effect of an electric field on the ac electrical treeing in various epoxy/reactive diluent systems was studied in a needle-plate electrode geometry. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and 1,4-butanediol diglycidyl ether (BDGE) or polyglycol (PG) as a reactive diluent was introduced to the DGEBA system, in order to decrease the viscosity of the DGEBA epoxy system. BDGE was acted as a chain extender, and PG acted as a flexibilizer, after the curing reaction. To measure the treeing initiation time and the propagation rate, three constant alternating currents (ac) of 10, 13 and 15 kV/4.2 mm (60 Hz) were applied to the specimen, in a needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. When 10 kV/4.2 mm (60 Hz) was applied, the treeing initiation time and the propagation rate in the DGEBA system were 356 min and $1.10{\times}10^{-3}$ mm/min, respectively, those in the DGEBA/BDGE system were 150 min and $1.14{\times}10^{-3}$ mm/min, respectively. Those in the DGEBA/PG system were 469 min and $1.05{\times}10^{-3}$ mm/min, respectively. As 15 kV/4.2 mm (60 Hz) was applied, the propagation rate in the DGEBA system was $5.41{\times}10^{-3}$ mm/min, and that in the DGEBA/PG system was $1.42{\times}10^{-3}$ mm/min. These values meant that PG could be used as a reactive diluent in the DGEBA system, without the deterioration of the insulation breakdown property.

• 조명전기설비학회논문지
• /
• 제16권2호
• /
• pp.113-120
• /
• 2002

본 논문은 인체에 의해 발생하는 정전기 방전과도전압 파형의 특성에 관한 것으로 정전기 방전전압의 피크 크기와 초기상승부분의 특성에 대한 통계를 분석하기 위해서 여러 가지 실험조건에서 정전기 방전전압을 측정하였다. 정전기 방전전압의 측정에는 주파수대역이 DC∼400[MHz]인 전압측정계를 사용하였으며, 정전기 방전전압의 파형은 전류 파형과 거의 동일하였다. 또한 본 연구에서 제안한 등가회로를 적용한 시뮬레이션결과는 측정결과와 거의 일치하였다. 정전기 방전전압 파형은 접촉 물체의 재질과 접근속도에 크게 영향을 받으며, 빠른 접근일 때가 느린 접근일 때보다 초기상승시간이 짧은 파형으로 나타났다. 손에 의한 정전기 방전전압의 상승시간은 10∼30[ns]로 비교적 길었으나, 크기는 작았다. 반면에 절연손잡이를 갖는 드라이버를 통한 정전기 방전전압 파형은 1[ns]이하의 매우 짧은 상승시간과 매우 큰 피크값을 나타내었다. 본 연구결과는 저전압 소전류인 전자기기의 정전기 장해에 대한 대책의 마련에 응용될 것이다.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1549-1554
• /
• 2010

플라스틱 나사는 경량성, 내식성, 열 및 전기절연성이 우수하여 최근 금속나사 대체용도로 사용 되고 있다. 플라스틱 나사는 사출성형에 의해 제작되며 성형과정에서 수축이 발생하여 형상정밀도가 저하된다. 특히 소형 정밀나사의 경우 마이크로미터 단위의 정밀도를 요구하는 관계로 소성가공에 의해 제작되는 금속나사를 대체하기 위해서는 많은 어려움이 따른다. 본 연구에서는 사출성형 공정의 수치해석을 통해 금형설계 인자를 결정하였고, 실험계획법을 적용하여 변형량을 최소화하기 위한 성형조건을 도출함으로써 플라스틱 나사의 형상정밀도 향상을 위한 연구를 수행하였다.

• 한국안전학회지
• /
• 제33권3호
• /
• pp.15-20
• /
• 2018

There have been a number of major fatal fire accidents in Korea recently. The number of fires in 2017 were 44,178, which is not only increasing number of fires but also increasing in casualties. Particularly, the fire at Jecheon Sports Center, which suffered many casualties, is expected to have a huge impact. The cause of the fire has not been determined yet, but heat waves on the ceiling have also been pointed out. As such, the copper heating waves, which are used as a preventive measure against damage of pipes due to freezing of pipes, etc., always have a fire hazard. To determine the possibility of a flame-resistant heated fire, a positive electric cable product was used to artificially ignite and analyze the results. In case of a short circuit, the external covering of the positive electric cable is damaged, but not short circuit unless the heating material surrounding the wire is damaged. Due to the characteristics of heating cable for preventing copper waves, the chances of insulation becoming more severe due to moisture and temperature changes are higher than normal wires. If the internal heating system is carbonized by insulating deterioration without damage to the outer coating, it is likely to cause trekking, to form a winding loop in the heating materials, and to cause short circuit in the heated materials. For the positive temperature line, if the middle is shorted, the current continues to flow to the short circuit unless the breaker disconnects. Consequently, a heated fire that does not cut off the power immediately may leave multiple marks or cuts.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.488-490
• /
• 2018

본 연구에서는 급격한 스위칭 특성을 달성하기 위해 싱글단일-게이트 실리콘 채널에서 전하 캐리어의 양의 피드백을 이용하는 새롭게 설계된 피드백 전계 효과 트랜지스터를 제안한다. 에너지 밴드 다이어그램, I-V 특성, 문턱전압 기울기 및 on/off 전류 비는 TCAD 시뮬레이터를 이용하여 분석한다. 피드백 전계 효과 트랜지스터의 중요한 특징 중 하나인 히스테리시스의 특성을 보기 위해 게이트 절연막 물질과 게이트 전극물질을 변경하여 시뮬레이션을 진행했다. 이러한 특성변화는 피드백 전계효과 트랜지스터의 문턱전압 ($V_{TH}$)을 변화시켰고, 메모리 윈도우 폭이 작아지는 현상을 보였다.