• Wind and Structures
• /
• 제10권1호
• /
• pp.45-60
• /
• 2007

Transmission tower is a vital component in electrical system. In order to accurately compute the dynamic response and reliability of transmission tower under the excitation of wind loading, a new method termed as probability density evolution method (PDEM) is introduced in the paper. The PDEM had been proved to be of high accuracy and efficiency in most kinds of stochastic structural analysis. Consequently, it is very hopeful for the above needs to apply the PDEM in dynamic response of wind-excited transmission towers. Meanwhile, this paper explores the wind stochastic field from stochastic Fourier spectrum. Based on this new viewpoint, the basic random parameters of the wind stochastic field, the roughness length $z_0$ and the mean wind velocity at 10 m heigh $U_{10}$, as well as their probability density functions, are investigated. A latticed steel transmission tower subject to wind loading is studied in detail. It is shown that not only the statistic quantities of the dynamic response, but also the instantaneous PDF of the response and the time varying reliability can be worked out by the proposed method. The results demonstrate that the PDEM is feasible and efficient in the dynamic response and reliability analysis of wind-excited transmission towers.

• 대한전자공학회논문지
• /
• 제13권4호
• /
• pp.1-5
• /
• 1976

Spectrum의 시간기복을 나타내는 시간 및 주파수의 함수 F(w,t,T) 및 W(w,t,T)를 정의하였고, 실례에 적용시켰다. Fourier변환을 f(t)와 Phasor ejwt와의 Correlation으로 정의하였고 그 변환시분이 시간마다의 성분의 합계이어서 t 시각에서의 Spectrum을 그 근거에서의 f(t)값에만 의함을 증명하였다. Two new time functions defining Time Dependent Fourier Transform F(w,t,T) and Time Dependent Spectrum Density W(w,t,T) are deduced. courier transform is defined as the correlation between the time function f(t) and phasor ejwt. Several theorems corncerning the new functions are proved in order to verify the instantaneous cause a effet of the function f(t) and the nuctuating spectrum.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.156-159
• /
• 1993

In this paper, computerized BEAM (brain electrical activity map) was implemented for objective and quantitative multichannel EEG analysis. BEAM is calculated by 4 point Interpolation method and number of elements are 5140. Representation methods of BEAH are two. One is dot density method which classify brain electrical potential 9 levels by dot density and the other is color method which classify brain electrical 12 levers by different colors. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.129-134
• /
• 1994

In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Transformation from temporal summation to two-dimensional mappings is formed by 4 nearest point interpolaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.291-309
• /
• 2020

Chromium was electrodeposited from deep eutectic solvents-based Cr³⁺ electrolytes on HB-pencil graphite electrode. Factors influencing the electrochemical behavior and the processes of Cr nucleation and growth were explored using cyclic voltammetry and chronoamperometry techniques, respectively. Cr³⁺ reduction was found to occur through an irreversible diffusion-controlled step followed by another irreversible one of impure diffusional behaviour. The reduction behavior was found to be greatly affected by Cr³⁺ concentration, temperature, and type of hydrogen bond donor used in deep eutectic solvents (DESs) preparation. A more comprehensive model was suggested and successfully applied to extract a consistent data relevant to Cr nucleation kinetics from the experimental current density transients. The potential, the temperature, and the hydrogen bond donor type were estimated to be critical factors controlling Cr nucleation. The nucleation and growth processes of Cr from either choline chloride/ethylene glycol (EG-DES) or choline chloride/urea (U-DES) deep eutectic solvents were evaluated at 70℃ to be three-dimensional (3D) instantaneous and diffusion-controlled, respectively. However, the kinetics of Cr nucleation from EG-DES was found to be faster than that from U-DES. Cr nucleation was tending to be instantaneous at higher temperature, potential, and Cr³⁺ concentration. Cr nuclei electrodeposited from EG-DES were characterized at different conditions using scanning electron microscope (SEM). SEM images show that high number density of fine spherical nuclei of almost same sizes was nearly obtained at higher temperature and more negative potential. Energy dispersive spectroscopy (EDS) analysis confirms that Cr deposits were obtained.

• 한국수산과학회지
• /
• 제49권3호
• /
• pp.351-358
• /
• 2016

The aim of this study was to verify the performance of Teleaulax amphioxeia as prey for Brachionus plicatilis and for the larvae of the bivalves (Pacific oyster Crassostrea gigas and Manila clam Ruditapes philippinarum) to select the best of five T. amphioxeia strains. The five strains of T. amphioxeia were collected from the coasts of Korea, purecultured and then fed to the rotifer and bivalve larvae. The density and fecundity rate of the rotifer fed on strain 01 were the highest. The instantaneous growth rate of the rotifer fed strain 08-2 was the highest. The maximum density and fecundity rate of the rotifer fed strain 08-2 were significantly higher than those fed Chlorella ellipsoidea, while instantaneous growth rate showed the opposite pattern. Survival rates of the Manila clam larvae fed each strain of Teleaulax showed no significant difference between strains. Survival rates of the Pacific oyster fed Teleaulax were significantly higher than those fed Chaetoceros sp., but lower than those fed I. galbana. This study indicates that strain 08-2 showed better growth for B. plicatilis and better survival for the bivalve larvae than did the other strains, and that T. amphioxeia can also be used as a prey organism for rotifers or bivalve larvae.

• 한국가스학회지
• /
• 제25권1호
• /
• pp.40-47
• /
• 2021

본 연구에서는 화재폭발 사고의 원인 규명을 위하여 다양한 시험 장비를 사용하여 유기과산화물의 일종인 터셔리부틸퍼옥시말레이트(TBPM)의 분해 및 폭발 위험성을 조사하였다. 시차주사열량(DSC) 분석결과, TBPM의 순간동력밀도(IPD)는 26,401 kW/ml로서 NFPA 반응성지수(Nr)가 4로 분류되었다. 또한 발열량과 개시온도 측정값을 이용한 폭발전달성(EP)과 충격감도(SS)는 양의 값을 나타내며 위험성이 있는 것으로 예측되었으며, 평가 장비를 활용한 실험적 결과로부터 충격감도와 마찰감도는 각각 4급 및 5급으로 평가되었다. 압력용기시험에서는 USA-PVT No.가 4로 분류되어 자기반응성물질에 해당되는 것으로 나타났다. 연소속도에 대한 조사 결과로부터 TBPM은 167 mm/sec의 연소속도를 나타내며 인화성고체 분류2에 포함되는 것으로 평가되었다.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.161-171
• /
• 1993

유역순간단위도를 수로기하학적 특성과 사면을 고려하여 유도하였다. 수로기하학적 특성은 Width function으로 정량화되며, 이것은 출구로부터 임의 흐름거리의 유량 분포를 나타낸다. 유역순간단위도의 유도에 사용된 모형은 간단한 확산함수에 의해 수로에 분포된 초기유량을 추적하는 추적요소와 사변에서의 체류시간 밀도함수인 지수분포로 나타내지는 사면요소로 구성하였다. 본 방법의 적용성을 검토하기 위하여 보청천유역, 위천유역에 대해 4개사상의 실측수문량을 이용하여 유역순간단위유량도를 산정하였으며, 산정 결과, 본 연구에서 제안한 방법 을 이용해 유역순간단위유량도를 유도할 수 있음을 확인하였다.

• 전자공학회논문지S
• /
• 제35S권7호
• /
• pp.86-94
• /
• 1998

The rosette-scan seeker is a device mounted on the infrared guided missile. It offers the positions and iamges of target to missiles servo system by scanning a space about target in rosette pattern with a single detector. An instantaneous field of view (IFOV), which is a diameter of a detector moving along the path of the rosette pattern, has the property that its smaller size provide the less interference of background signals and detector noise. If its size is too small to voer the total field of view (TFOV), however, it produces the invisible regions in the TFOV. In this case, the invisible regions cause the performance of the seeker to deteriorate. For full scan-coverage, it is necessary to design the small IFOV without the invisible regions in the TFOV, as possible. In this paper, we propose the new method of designing the smaller IFOV than the conventional method and verify full coverage of the scanned region. By comparing the nose equivalent flux density (NEFD) of the proposed method with the that of the conventional one, we confirm that the former is better than the latter in terms of performance.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.151-165
• /
• 2021

This paper aims to present a novelty damage detection method to identify damage locations by the simultaneous use of both the energy and displacement damage indices. Using this novelty method, the damaged location and even the damaged floor are accurately detected. As a first method, a combination of the instantaneous frequency energy index (EDI) and the structural acceleration responses are used. To evaluate the first method and also present a rapid assessment method, the Displacement Damage Index (DDI), which consists of the error reliability (β) and Normal Probability Density Function (NPDF) indices, are introduced. The innovation of this method is the simultaneous use of displacement-acceleration responses during one process, which is more effective in the rapid evaluation of damage patterns with velocity vectors. In order to evaluate the effectiveness of the proposed method, various damage scenarios of the ASCE benchmark problem, and the effects of measurement noise were studied numerically. Extensive analyses show that the rapid proposed method is capable of accurately detecting the location of sparse damages through the building. Finally, the proposed method was validated by experimental studies of a six-story steel building structure with single and multiple damage cases.