• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.378-386
• /
• 2023

A wideband instantaneous frequency measurement (IFM) system is been proposed, designed and analyzed. Phase modulation to intensity modulation conversion is implemented based on the stimulated Brillouin scattering (SBS) effect, and the microwave frequency can be measured by detecting the change in output power. Theoretical analysis shows that the frequency measurement range can be extended to 4f_b by adjusting the two sweeping signals of the phase modulators with a difference of 2f_b. The IFM system is set up using VPI transmission maker software and the performances are simulated and analyzed. The simulation results show that the measurement range is 0.5-45.96 GHz with a maximum measurement error of less than 9.9 MHz. The proposed IFM system has a wider measurement range than the existing SBS-based IFM system.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.42-49
• /
• 2016

본 논문에서는 지연 선로의 경로차를 이용하여 4~6 GHz의 연속파 신호를 감지하여 125 MHz의 해상도로 순시 주파수를 측정하는 순시 주파수 측정용 수신기를 설계 및 제작하였다. 수신기는 4 비트 지연 선로 구조를 가졌으며, 전력 분배기, 지연 선로, 전력 합성기, 전력 검파기, 비교기 등으로 구성되었다. 각각의 비트에 배정된 지연 선로의 주파수에 따른 경로 손실 차이를 보상하고, 전력 검파 특성의 주파수 의존성을 보정하기 위해 오프셋 전압 보상을 비교기에 적용하여 측정의 정확성을 향상시켰다.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.361-367
• /
• 2020

An approach based on an integrated photonic Ti:LiNbO₃ Y branch has been proposed, designed, and analyzed for the microwave instantaneous frequency measurement (IFM). By designing the Y branch with length L = 6545 ㎛ and refractive index N_TE - N_TM = 0.0764, a complementary optical filter with free spectral range (FSR) of 600 GHz is constituted, which results in a maximum measureable frequency of 300 GHz being obtained. Theoretical analysis on the temperature stability of the Ti:LiNbO₃ Y branch shows that the FSR variation of the complementary filter is 0.3% for the temperature change of 100 K, which indicates that the IFM approach will have a better stability. All these results demonstrate that the proposed IFM approach has potential capability to be used for the increasingly higher microwave IFM with better stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권4호
• /
• pp.33-40
• /
• 1987

Arc power is consumed energy per unit time between welding electrodes. The relations between consumed energy and electrode distance, current, voltage are nonlinear characteristics. Therefore commercial A.C. wattmeter cannot be used for measurement of the arc power. Most of arc energy measuring systems are developed for relay contact arc measurement. Relaly arc requires integrated instantaneous power because relay arc finishes in a short instant. But most of welding powers are continually consumed powers, therefore instantaneous power must be continually indicated in the form of averagy value. The author propose a new measurement method of power in which the current and voltage of welding electrode is multiplied and the resultant signal is passed to low pass filter in order to remove higher order frequency components. After integrating, the signal is devided by the integral interval and the results are stored in a computer memory.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.198-202
• /
• 2003

An engineer prefers DIFM receiver which is superior to instantaneous response rather than superheterodyne receiver which has a scan rate in normal wide band receiver designing. But DIFM receiver has weak point in sensitivity and continuous wave signal because of special environments. In this paper we propose the method which is certificated through simulation and prototype testing to improve sensitivity of DIFM receiver. And we analyze the important factors of DIFM receiver from our results.

• 전자공학회논문지SC
• /
• 제45권6호
• /
• pp.141-148
• /
• 2008

신재생 에너지 분야에서 각광받고 있는 계통 연계형 태양광 인버터에서는 계통과의 연계를 위해서 반드시 계통의 위상 정보가 필요하다. 본 논문에서는 계통 연계형 태양광 발전 시스템에서의 위상 동기화 방법으로 원하는 기준 신호의 주파수를 구하여 동기신호로 사용하고, DFT(Discrete Fourier Transform) 알고리즘을 이용하여 기준 신호와의 위상차를 구하여 위상차만큼 보상하는 PLL(Phase Locked Loop)의 순시 추종방법을 제안하였다. 또한 DFT 연산에 사용되는 한주기 값들을 샘플링 할때마다 보정 위상 값을 구하는 방법과 특정 주파수의 기준신호에 대한 주파수 및 위상 추종뿐만 아니라 다양한 주파수 신호에 대한 주파수 및 위상을 추종하는 방법을 적용하여 시뮬레이션과 실험을 통해 본 논문의 타당성을 검증하여 유효성을 보이고자 한다.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.816-823
• /
• 2018

The Auto-synchronizer is essential equipment for synchronizing a generator to the power system. It is performing that measurement of the magnitude, frequency and phase of the voltage signal of the power system and generator. It is important to select the appropriate measurement algorithm for preventing various problem such as mechanical stress and Electrical problem. Teager Energy Operator(TEO) and Discrete separation algorithm(DESA) is measurable the instantaneous parameters of a sine wave using 5 samples and can be measured at a fast and with a simple operation. Therefore it has many advantages in measuring the parameters. In this paper, it confirmed measurement results using matlab simulations when there are synchronized in order of frequency, magnitude. Also it presented methods using digital filters and sample intervals to improve accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1233-1239
• /
• 2000

순시주파수를 갖는 FM 신호의 대역폭을 효율적으로 측정하기 위한 방법을 제안한다. ITU-R 권고 x-dB 대역폭 추정의 문제점을 해결하기 위하여 smoothing 필터를 사용하였으며, 이는 스펙트럼 포락선의 섭동을 제거해줌으로써 기준레벨과 x-dB 차이가 되는 교차 주파수를 쉽게 정할 수 있는 장점이 있다. 시뮬레이션 결과 제안된 방법이 기존 x-dB 대역폭 측정방법보다 표본 바이러스 및 평균 제곱오차 면에서 우수한 성능을 제공함을 확인하였다.