• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.533-536
• /
• 2009

Withdrawal time of erythromycin in the cultured black rockfish (Sebastes schlegeli) was investigated to provide regulatory authority and fishery industry with full information needed to secure food safety of the fish treated with erythromycin. Medication was carried out using the experimental diet containing erythromycin of which concentration was 200 mg/kg diet and its daily dose was about 40 mg/kg body weight. The withdrawal time needed to reduce antibiotic contents around 10.0 mg/kg accumulated during 9 days medication below 0.2 mg/kg was identified about 10 days. The antibiotic with 13.7 mg/kg of fish on the $9^{th}$ days of medication was completely depleted after 30 days from stop of medication.

• 한국수산과학회지
• /
• 제51권5호
• /
• pp.524-534
• /
• 2018

This study assessed the biological and physicochemical hazards involved in establishing a hazard analysis critical control point (HACCP) for canned seasoned Broughton's ribbed ark Scapharca broughtonii and examined the critical control points (CCPs) in the field. Following the basic principles of the HACCP system, the hazard-evaluation procedures were enacted during the production of canned seasoned Broughton's ribbed ark after field investigation of a seafood product company in Korea. CCPs were determined using canned seasoned Broughton's ribbed ark with the corresponding control measures. The HACCP system was applied to each step in processing the product. The results indicated that inspection of raw materials, filling, sterilization, and alien substance detection were the most important CCPs. These results can be used to prevent and control food safety problems in the production of canned seasoned Broughton's ribbed ark.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.579-589
• /
• 2008

In the past few years, there are many studies and researches of the underwater vehicles which are carried out its mission using sonar sensors. MSCL(Marine System Control Lab.) at Inha University developed test-bed small ROV, ISRO. ISRO is an open-frame type and has 4 thrusters. ISRO can control 4 motions i.e surge, sway, yaw and heave with sonar sensors. ISRO is developed for inspection of ship hull, marine structure, plant of lake or river and so on. When ROV ISRO inspects something, it is necessary to control the position of ROV ISRO's for the movement and anti-collision with structures in the underwater. In this paper, we deal with the development of a small ROV and verification of the position control system via simulation and experiment using sonar sensors.

• 한국식생활문화학회지
• /
• 제8권2호
• /
• pp.103-116
• /
• 1993

The purpose of this study was to assess the nutrition education and training needs as a basis for program planning for day care children. Nutrition achievement test developed by American National Dairy Council and Iowa state University was modified and used for measuring the level of basic knowledge of food and nutrition for day care children. The results of this study can be summarized as follows 1. Over 70% of mothers indicated their children had a certain degree of food behavior and feeding problems in terms of unbalanced food habit, irregular meal period. 2. Mean score for the nutrition achievement test for day care children was 9.3. 3. The nutrition achievement test score for children with high socio-economic status was significantly higher than those of children with middle and lower group. 4. Inspection of the difficulty difference indices showed that over the 50% of the children had more items that were easier in the content of physiological facts than in the food handling and social psychological aspects of foods.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.279-285
• /
• 2002

Condominium management ask for planning ability and special knowledge in order to solve the troubles of a condominium. But not all HOA have that ability or knowledge, so administration support to condominium management came to be given to HOA. In this study, we divided the administration policies on condominium management as follows;$\circled1$instruction about an advertisement and a contract$\circled2$instruction about management$\circled3$instruction about maintenance $\circled4$ instruction by the local government $\circled5$ legislation about condominium management. The condominium management policy has been almost programmed by the state, such as legal amendments to laws and advises by administrative inspection. But these condominium management policies by the state have limitations to support HOA appropriately, so correspondence of the local government is called for, On the other hand, in the local governments, grasp basic contents for execution to the condominium management policy, an information of offering and consultation has been started. And system that suits the situation and the characteristic of each district was provided. However it could not say that we grasp the tendency of the condominium management policies wholly of the local governments, so it remains as a subject because it is not long since condominium management policies of the local government started, and we picked up only metropolis in this study. In the future, it is necessary to search on the consciousness of a resident and the HOA about the condominium management policy, and make out the data which can be reflected in policy deployment in the local governments from now on. ＊ HOA ‥‥ Home Owners Association

• 한국정밀공학회지
• /
• 제5권1호
• /
• pp.63-70
• /
• 1988

Laser cutting system uses a gas jet to remove the molten or varpozed material from the workpiece. The quality of the laser cut can be strongly influenced by the gas flow charac- teristics formed through the nozzle. Laser cutting experiments were carried out for SS41 and SUS 304 to investigate the relationship between cut quality and cutting pressure. The cutting speed, nozzle pressure and nozzle to workpiece distance were also considered. The cut specimens were inspected by various manners such as dross observation, surface roughness test and kerf width measurement. Based on the data of pressure measurement on workpiece and the results of cut surface inspection, the influence of the considered cutting conditions on cut quality could be evaluated. The results of this study will be valuable in planning the optimal laser cutting process and in designing the laser cutting nozzle.

• Structural Engineering and Mechanics
• /
• 제72권1호
• /
• pp.31-41
• /
• 2019

Structural integrity assessment of piping components is of paramount important for remaining life prediction, residual strength evaluation and for in-service inspection planning. For accurate prediction of these, a reliable fracture parameter is essential. One of the fracture parameters is stress intensity factor (SIF), which is generally preferred for high strength materials, can be evaluated by using linear elastic fracture mechanics principles. To employ available analytical and numerical procedures for fracture analysis of piping components, it takes considerable amount of time and effort. In view of this, an alternative approach to analytical and finite element analysis, a model based on relevance vector machine (RVM) is developed to predict SIF of part through crack of a piping component under fatigue loading. RVM is based on probabilistic approach and regression and it is established based on Bayesian formulation of a linear model with an appropriate prior that results in a sparse representation. Model for SIF prediction is developed by using MATLAB software wherein 70% of the data has been used for the development of RVM model and rest of the data is used for validation. The predicted SIF is found to be in good agreement with the corresponding analytical solution, and can be used for damage tolerant analysis of structural components.

• Safety and Health at Work
• /
• 제6권4호
• /
• pp.263-267
• /
• 2015

Significant changes in the past year have taken place in the world of work that are bringing new challenges with regard to employee safety and health. These changes have led to emerging psychosocial risks (PSRs) at work. The risks are primarily linked to how work is designed, organized, and managed, and to the economic and social frame of work. These factors have increased the level of work-related stress and can lead to serious deterioration in mental and physical health. In tackling PSRs, the European labor inspectorates can have an important role by enforcing preventive and/or corrective interventions in the content and context of work. However, to improve working conditions, unilateral interventions in the context and content of work are insufficient and require adopting a common strategy to tackle PSRs, based on a holistic approach. The implementation of a common strategy by the European Labor Inspectorate for tackling PSRs is restricted by the lack of a common legislative frame with regard to PSR evaluation and management, the different levels of labor inspectors' training, and the different levels of employees' and employers' health and safety culture.

• 농업과학연구
• /
• 제48권3호
• /
• pp.617-627
• /
• 2021

In the field of on-road motor vehicles, the level for autonomous driving technology is defined according to J3016, proposed by Society of Automotive Engineers (SAE) International. However, in the field of agricultural machinery, different standards are applied by country and manufacturer, without a standardized classification for autonomous driving technology which makes it difficult to clearly define and accurately evaluate the autonomous driving technology, for agricultural machinery. In this study, a method to classify the autonomy levels for autonomous agricultural machinery (ALAAM) is proposed by modifying the SAE International J3016 to better characterize various agricultural operations such as tillage, spraying and harvesting. The ALAAM was classified into 6 levels from 0 (manual) to 5 (full automation) depending on the status of operator and autonomous system interventions for each item related to the automation of agricultural tasks such as straight-curve path driving, path-implement operation, operation-environmental awareness, error response, and task area planning. The core of the ALAAM classification is based on the relative roles between the operator and autonomous system for the automation of agricultural machines. The proposed ALAAM is expected to promote the establishment of a standard to classify the autonomous driving levels of self-propelled agricultural machinery.

• 대한건축학회논문집:계획계
• /
• 제35권2호
• /
• pp.73-82
• /
• 2019

The purpose of this study was to analyze the area of the southern gate in ancient temples. As the southern gate played a role of the front gate, the national or royal ceremonies had been held around the southern gates. The ancient southern gate of temples has had the place for the huge ceremonies such as a royal parade and an inspection of troops. Moreover, this place was recorded in the 'Samkooksagi(三國史記)' as Jeon-Ro(前路). The Southern gate and the Jeon-Ro had been planned together in the front area of the ancient temples, and the gate had been designed to look down the Jeon-Ro. These findings can be verified through the result of a recent excavation at a site of Hwangnyongsa temple in Gyeongju. This research confirmed that the huge ceremonies had been held at the Jeon-Ro including the area of southern gates. Furthermore, a Hwangnyongsa temple is regarded as a concrete case of verifying the composition of the area of Southern gate.