• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.165-173
• /
• 1997

The present study investigates heat/mass transfer for flow through perforated plates for application to combustor wall and turbine blade film cooling. The experiments are conducted for hole length to diameter ratios of 0.68 to 1.5, for hole pitch-to-diameter ratios of 1.5 and 3.0, for gap distance between two parallel perforated plates of 1 to 3 hole diameters, and for Reynolds numbers of 60 to 13, 700. Local heat/mass transfer coefficients near and inside the cooling holes are obtained using a naphthalene sublimation technique. Detailed knowledge of the local transfer coefficients is essential to analyze thermal stress in turbine components. The results indicate that the heat/mass transfer coefficients inside the hole surface vary significantly due to flow separation and reattachment. The transfer coefficient near the reattachment point is about four and half times that for a fully developed circular tube flow. The heat/mass transfer coefficient on the leeward surface has the same order as that on the windward surface because of a strong recirculation flow between neighboring jets from the array of holes. For flow through two perforated plate layers, the transfer coefficients on the target surface (windward surface of the second wall) affected by the gap spacing are approximately three to four times higher than that with a single layer.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.581-584
• /
• 2008

본 연구에서는 판상-링형 구속시험방법의 유효성 평가를 위하여 그 특성을 국내.외에서 제안된 콘크리트 구속수축시험방법과 비교하여 간편하고 정량적인 수축균열 평가방법의 개발을 위한 기초자료를 제시하고자 하였다. 판상-링형 구속시험방법의 적정 시험체 치수를 검토하기 위하여 시험체 내부링 직경 100, 150 및 200mm, 시험체 높이 30 및 50mm에 대하여 온도 20${\pm}$3$^{\circ}$C, 습도 60${\pm}$5%의 항온항습조건에서 양생 후 마이다스 프로그램을 이용한 3D Solid 요소의 수치 해석, 건조수축변형, 구속수축응력, 균열면적 및 균열 포인트 측정 등 콘크리트의 구속수축균열 특성을 평가하였으며, 그 결과 콘크리트 링 시험체 내부 링 직경 최소 150mm이상, 높이 50mm에서 변별력 있는 평가가 가능한 것으로나타났다. 본 연구를 바탕으로 향후, 판상-링형 구속시험방법에 있어서 온도, 풍속 등의 환경조건 및 배합조건에 따른 콘크리트의 구속수축균열특성에 관한 연구가 필요할 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.615-622
• /
• 2017

충격파관에서 발생하는 충격파는 저압관단으로 전파하며, 관단에서 반사한다. 반사 충격파와 경계층의 간섭으로 반사 충격파에 분지가 발생하게 되고, 분지한 반사 충격파는 접촉면과 간섭하며, shock train이 발생하게 된다. 그러나 충격파관에서 발생하는 shock train 현상에 대한 연구는 미흡한 실정이다. 본 연구에서는 2차원 축대칭 충격파관을 사용하여 비정상, 압축성 Navier-Stokes 방정식을 적용한 수치해석을 수행하였으며, shock train의 상세한 특성을 조사하기 위하여, 고정된 압력비에서 충격파관의 길이 및 직경을 변화시켰다.

• 설비공학논문집
• /
• 제20권11호
• /
• pp.760-766
• /
• 2008

The characteristics of heat transfer and pressure drop of several different porous materials which can be used as inserts inside solar volumetric air receivers were experimentally investigated. Generally, porous materials were inserted into solar volumetric air receivers to increase the thermal performance. In the present work, honeycomb (diameter: 100 mm, thickness: 30 mm), laminated mesh (diameter: 100 mm, thickness: 1 mm) are considered as the inserts for the experiment. The experimental apparatus consists mainly of a cylindrical ceramic duct as a receiver and an electric heater as an energy source. This system is an intake open loop, which used as air of working fluid. The temperatures inside the ceramic tube are measured by thermocouples, which are installed at each layer of the porous materials. The pressure-drop experimental apparatus is fabricated alike the above experimental equipment. An acrylic tube is used like as the ceramic tube, which has the same specifications of the ceramic tube. The pressure drop of porous materials inserted in the acrylic tube is measured between front and rear of those by transmitter. The results show that the laminated mesh surpasses the honeycomb of heat transfer and pressure drop increase as the porous material thickness and Reynolds number.

• 한국환경과학회지
• /
• 제28권11호
• /
• pp.1019-1025
• /
• 2019

The aim of this study was to analyze the light traits in a solar light-collector device and its effects on lettuce growth at an early growth stage. The three hyper parameters used were the reflector diameter (2 cm and 4 cm), coating inside the reflector (chrome-coated, non-coated) and distance from the light fiber (15 cm and 20 cm). The results showed that light efficiency, which is the ratio of light intensity inside the fiber to the solar intensity, improved by 41.1 % when using a 2 cm diameter chrome-coated reflector at a distance of 15 cm from the light fiber; whereas it only improved by 20.6% when a non-coated reflector was used. As the reflector size was increased to 4 cm, the light efficiency for the coated and non-coated reflectors increased by 28.5 % and 26.4 %, respectively, hence, no significant difference was observed. When the light fiber was placed at a distance of 20 cm, the increase in light efficiency with coating treatment was 8 % higher than without coating treatment. We also compared the efficiency of light-fiber treatment with that of LED treatment in our lettuce nursery, and observed that the plants exhibited better growth with light-fiber treatment. We observed an average increase of 1.7 cm in leaf height, $7cm^2/plant$ increase in leaf area, and 32 mm increase in root length upon light-fiber treatment as opposed to those observed with LED treatment. These findings indicate that the collector light-fiber is economically feasible and it improves lettuce growth compared with the LED treatment.

• 설비공학논문집
• /
• 제17권7호
• /
• pp.649-658
• /
• 2005

Flow condensation heat transfer coefficients (HTCs) of R22, R410, Propane (R290) were measured inside a horizontal 9 hole aluminum multi-channel flat tube. The main test section in the refrigerant loop was made of a 0.53m long multi-channel flat tube of hydraulic diameter of 1.4 mm. Refrigerant was cooled by passing cold water through an annulus surrounding the test section. Data were obtained in qualities of $0.1\~0.9$ at mass flux of $200\~400kg/m^2s$ and heat flux of $7.3\~7.7kW/m^2$ at the saturation temperature of $40^{\circ}C$. All popular heat transfer correlations in single-phase subcooled liquid flow and flow condensation originally developed for large single tubes predicted the present data of the multi channel flat tube within $25\%$ deviation when effective heat transfer area was used in determining experimental data. This suggests that there is little change in flow characteristics and patterns when the tube diameter is reduced down to 1.4 mm diameter range. Hence, a modified correlation based on the present data was proposed which could be applied to small diameter tubes with effective heat transfer area. The correlation showed a mean deviation of less than $20\%$ for all data.

• 대한토목학회논문집
• /
• 제31권4B호
• /
• pp.323-332
• /
• 2011

하천에서 수목의 관리를 위해서는 수목이 홍수에 미치는 영향이나 생태적 특성을 고려하여 대책을 수립하여야 한다. 수목에 의한 수리학적 영향은 통수능 감소와 유수력에 의한 전도로 인한 하류 하천시설물의 기능 저해이다. 현장 인발시험은 수목이 전도될 때의 최대 저항력을 측정하여, 하천 내의 수목이 외력에 저항하는 정도를 파악하기 위해 시행하였다. 수목의 전도모멘트를 파악하기 위한 인자는 수목의 외형적 특성인 수종, 흉고직경, 수고 등이며, 본 연구에서는 전도모멘트와 흉고 직경의 상관관계를 이용하였다. 수목의 한계 전도모멘트는 흉고직경 4.9-32.8 cm의 관목과 교목 100주를 바탕으로 검토되었다. 교목과 관목을 함께 고려할 경우에는 흉고직경과 한계 전도모멘트의 상관관계를 도출하기 어려웠다. 그러나 교목만을 고려할 경우에는 흉고직경과 한계 전도모멘트 사이에 일정한 상관관계가 있음을 확인하였다.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.21-33
• /
• 2017

본 연구에서는 항타시공성(BPM, blow per meter)을 고려하여 대구경 항타강관말뚝을 시공하였을 때 발생하는 폐색효과를 분석하였다. Coupled Eulerian-Lagrangian(CEL)해석 시 적용된 항타에너지는 파동방정식을 이용하여 산정하였고, CEL 대변형 3차원 유한요소 해석을 수행하여 말뚝 항타시공 과정을 모사하였다. 본 연구 결과, 말뚝 직경이 증가함에 따라 목표 깊이까지 소요되는 항타에너지는 증가(일정한 BPM인 경우에 해당함) 하였으며, 그 결과 soil plugging index(SPI)는 서로 유사하게 나타나지만 폐색효과는 감소함을 알 수 있었다. 또한, 말뚝의 근입 깊이가 증가할수록 SPI는 서로 유사한 값을 나타냈으나 관내토에서 발생하는 수평토압이 증가하게 되어 폐색효과는 오히려 증가하는 것으로 나타났다. 본 연구결과, 폐색효과의 대표적 영향인자인 말뚝 직경, 말뚝 근입 깊이, 지반 탄성계수, BPM에 따른 관내토의 수평토압계수 분포 경향을 제안하였다.