• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.207-212
• /
• 2016

신뢰성 및 반복성을 포함한 장점을 갖고 있는 고주파 유도 경화는 많은 산업분야에 사용된다. 고주파 유도 경화는 화염을 이용하지 않고 최소한의 시간에 에너지-효율적인 가열방법을 제공하는 비접촉식 방법이다. 최근, 유한요소법을 이용한 고주파 유도 경화가 적극적으로 연구되고 있지만, 이들 연구는 단지 분석의 정확도에 초점을 맞추고 있다. 본 논문에서는 코일 및 입력 전원을 동일한 형태의 조건에서 가변 주파수를 적용하여 해석하고 실험결과와 비교하였다. 해석과 실험 결과는 최적의 주파수인 3kHz를 사용하였을 때 경화 깊이가 거의 동일함을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권1호
• /
• pp.96-116
• /
• 2016

Sensing coverage is a fundamental issue for Wireless Sensor Networks (WSNs). Several coverage configuration protocols have been developed; most of them presume the availability of precise knowledge about each node location via GPS receivers. However, equipping each sensor node with a GPS is very expensive in terms of both energy and cost. On the other hand, several GPS-less localization algorithms that aim at obtaining nodes locations with a low cost have been proposed. Although their deep correlation, sensing coverage and localization have long been treated separately. In this paper, we analyze, design and evaluate a novel integrated framework providing both localization and coverage guarantees for WSNs. We integrate the well-known Coverage Configuration Protocol CCP with an improved version of the localization algorithm AT-Dist. We enhanced the original specification of AT-Dist in order to guarantee the necessary localization accuracy required by CCP. In our proposed framework, a few number of nodes are assumed to know their exact positions and dynamically vary their transmission ranges. The remaining sensors positions are derived, as accurately as possible, using this little initial location information. All nodes positions (exact and derived) are then used as an input for the coverage module. Extensive simulation results show that, even with a very low anchor density, our proposal reaches the same performance and efficiency as the ideal CCP based on complete and precise knowledge of sensors coordinates.

• 유기물자원화
• /
• 제24권2호
• /
• pp.59-66
• /
• 2016

본 연구는 음폐수를 대상으로 산발효와 메탄발효가 일체형으로 구성된 혐기성소화방식에 대한 경제적, 기술적 타당성 검토를 위함이며, 이를 위해 현재 운영 중인 24톤/일의 시설 운영현황 분석을 실시하였다. 실험 결과, 음폐수 내에 VS 기준 유기물 제거율은 73.7%로 분석되었으며, 바이오가스는 평균 $1,239m^3$/일($54.4m^3$/톤-투입음폐수)이 생산되었다. 일체형 소화조는 구조 특성상 분리형 2상 소화조 대비 설치 면적과 소요 열량이 각각 15.9%~47%, 11.6%~17.8%의 절감 효과가 있는 것으로 나타났다. 이상의 운전결과를 종합해보면, 분리형 소화 방식 대비 소요부지면적 축소, 시설비 절감 등의 이점이 기대되는 일체형 2상 혐기성소화 방식은 보다 상용화된 대형 플랜트로의 적용 타당성이 높을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.723-735
• /
• 2020

This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.447-452
• /
• 2005

The synthesis and consolidation of titanium silicide by electro-discharge-sintering has been investigated. As-received Ti powder was in flaky shape and the mean particle size was $45.0{\mu}m$, whereas the mean particle size of the pre-milled Si powder with angular shape was $8.0{\mu}m$. Single pulse of 2.5 to 5.0 kJ/0.34g-elemental Ti and pre-milled Si powder mixture with the composition of $Ti-37.5at.\%$ Si was applied using $300{\mu}F$ capacitor. The solid with $Ti_5Si_3$ phase has been successfully fabricated by the discharge with the input energy more than 2.5kJ in less than $129{\mu}sec.$ Hv values were found to be higher than $1000kgf/mm^2$. The formation of $Ti_5Si_3$ occurred through a fast solid state diffusion reaction.

• 대한의용생체공학회:의공학회지
• /
• 제28권5호
• /
• pp.647-656
• /
• 2007

The purpose of this study was to analyze the effects of vibratory stimulus as somatosensory inputs on the postural control in human standing. To study these effects, the center of pressure(COP) was observed while subjects were standing on a stable and an unstable support with co-stimulated mechanical vibrations to flexor ankle muscles(tibialis anterior tendon, achilles tendon) and two plantar zones on both foot. The COP sway measurement was repeated twice in four conditions: (1) with visual cue and vibration, (2) without visual cue and vibration, (3) with visual cue and without vibration, (4) without visual cue and with vibration. The calculated parameters were the COP sway area and the distance, the median frequency and the spectral energy of COP sway in three intervals $0.1{\sim}0.3,\;0.3{\sim}1,\;1{\sim}3Hz$. The results showed that vibratory stimulus affect postural stability. The reduction rate of the COP sway with vibratory stimulus were higher on the unstable support because the effect of postural stability increases when afferent nervous flow is more activated by vibration on unstable support. If unclear visual or vibratory information is received, one type of information is compared with the other type of sensory information. Then the input balance between visual and vibratory information is corrected to maintain postural stability. These findings are important for the rehabilitation system of postural balance control and the use of vibratory information.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.641-647
• /
• 2016

피에조 DOD(drop-on-demand) 잉크젯 프린팅 방식은 다양한 종류의 잉크를 사용할 수 있기 때문에 최근에 첨단 산업에 적용이 활발히 연구되고 있다. 피에조 잉크젯 헤드에서 토출되는 액적의 형성 과정을 VOF(Volume-of-Fluid) 기법을 이용한 전산해석으로 예측하고 이를 측정결과와 비교하였다. 작동유체는 에틸렌 글리콜 50%와 IPA(Isopropil alchol) 50%의 혼합액을 사용하였다. 노즐 출구에서 메니스커스 변위의 시간에 따른 변화를 직접 측정하여 노즐 입구의 속도분포를 예측하고 이를 해석의 초기조건 입력자료로 사용하였다. 측정치와 해석치를 비교한 결과 전산해석이 측정치의 액적 형성 과정을 잘 예측함을 알 수 있었다. 주액적 형성과정보다 위성액적 형성과정 예측에 오차가 약간 컸는데, 이는 정지중의 공기에 큰 질량의 주액적이 날아가는 것을 예측할 때는 해석오차가 적지만 주액적에 의해서 주변 공기 유동이 활발해진 상태에서 적은 질량의 위성액적이 날아가는 것을 예측할 때는 해석오차가 상대적으로 커지기 때문이다. 또한 에틸렌 글리콜과 IPA의 혼합 비율을 달리하여 물성치를 변화시킨 다른 잉크에 대해서도 잉크 액적 형상을 예측한 결과 실험 결과를 비교적 정확히 예측할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제9권11호
• /
• pp.289-296
• /
• 2009

본 논문에서, 생물계로 자기자극장치를 사용할 경우 잠재적인 사용에 대한 전력소자 응용제어 기술에 대해 언급 하고자 한다. 자기자극장치의 효과는 자기 자극코일에 의해 전달된 전류 펄스파형에 유도한 전계와 기하학 구성에 의존한다. TMS는 두뇌에 있는 전계를 유도하는 전자장의 펄스를 머리의 외부에서 자극하게 된다. TMS는 두뇌의 자극을 통해, 진단 및 치료에 있는 수많은 응용이 가능하다. 이러한 요소들은 코일의 구성과 전원 장치와 크기의 등가적 요구와 특성으로 매우 중요한 기능을 가지게 된다. 제안하고자 하는 해결방법은 입력에 대하여 가변크기와 주기를 가지는 전류펄스 발생을 가진다. 또한, 해결방법은 전원에서 부하로 에너지 전송과 축적의 요소를 기본으로 할 수가 있다. 제안한 방식으로, 전력 회로 매개 변수의 충분한 통제를 통한 기획과 전략으로 단극파형 또는 양극 파형을 얻을 수가 있었다.

• 환경위생공학
• /
• 제8권2호
• /
• pp.25-48
• /
• 1993

International concern over the environmental pollution is ever increasing, and diversified countermeasures must be devised in Korea also. Global trend, damages, problems and countermeasures with respect to issues mentioned in the Rio Declaration, such as prevention of ozone layer destruction, reduction of migratory atmospheric pollution between neighboring countries, and prevention of global greenhouse effect, were discussed in this report. Conclusion of the report is summarized as follows : A. Measurement, Planning and Monitoring (1) Development and implementation of a global network for measurement and monitoring from the global aspects such factors as related to acid rain(Pioneer substances, pH, sulfate, nitrate), effect of global temperature(Air temperature, $CO_2$, $CH_4$, CFC, $N_2O$) and destruction of ozone layer($CFC_S$). (2) Establishment of network system via satellite monitoring movement of regional air mass, damage on the ozone layer and ground temperature distribution. B. Elucidation of Present State (1) Improvement and development of devices for carbon circulation capable of accurately forecasting input and output of carbon. (2) Developmental research on chemical reactions of greenhouse gas in the air. (3) Improvement and development of global circulation model(GCM) C. Impact Assessment Impact assessment on ecosystem, human body, agriculture, floodgate, land use, coastal ecology, industries, etc. D. Preventive Measures and Technology Development (1) Development and consumption of new energy (2) Development of new technology for removal of pioneer substances (3) Development of substitute matter for $CFC_S$ (4) Improvement of agriculture and forestry means to prevent the destruction of ozone layer and the greenhouse effect of the globe (5) Improvement of housing to prevent the destruction of ozone layer and the greenhouse effect of the globe (6) Development of new technology for probing underground water (7) Preservation of forest (8) Biomass 5. Policy Development (1) Development of strategy model (2) Development of long term forecast model (3) Development of penalty charge effect and expense evaluation methods (4) Feasibility study on regulations By establishing the above mentioned measures for environmentally sound and sustainable development to establish the right to live for humankind and to preserve the one and only earth.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.43-48
• /
• 2008

Through simulations and field experiment on A.C. parallel operation of both Utility Interactive Photovoltaic System and Diesel Engine Revolving Field Type Synchronous Generator, following factors have been found. First, the inverter should be operated in three modes of frequency(mode.1: ${\pm}$0.3Hz, mode.2: ${\pm}$1Hz, mode.3: ${\pm}$2Hz) as default, considering properties of operating Synchronous Generator. Second, as a result of supplying 13.5kW of residual power, it has been found that Synchronous Generator takes the power input only as reactive power, because it was electrically stable with frequency of 60.14Hz and high voltage of 222.3V even when power factor was -0.94. Besides, it was mechanically stable, too, because the quake, noise, and temperature of Synchronous Generator in this case were 7.5mm/s, 97dB, and $6^{\circ}C$ respectively, which were lower than normal load connection of 145.6kW; 11.03mm/s. Thus, load share of Revolving Field Type Synchronous Generator reduces according to the supply of Photovoltaic System to the load power. In this experiment, 200kW of Synchronous Generator and 40kW of Photovoltaic System were operated in parallel. The load share was 20% in maximum. and 11.1lit/hr of fuel was saved.