• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.527-539
• /
• 2009

In this paper, we propose an asynchonous ICI (Inter-Cell Interference) mitigation techniques for 3GPP LTE MIMO-OFDMA down-link receiver. An increasing in symbol timing misalignments may occur relative to sychronous network as the result of BS (Base Station) timing differences. Such symbol synchronization errors that exceed the guard interval or the cyclic prefix duration may result in MAI (Multiple Access Interference) for other carriers. In particular, at the cell boundary, this MAI becomes a critical factor, leading to degraded channel throughput and severe asynchronous ICI. Hence, many researchers have investigated the interference mitigation method in the presence of asynchronous ICI and it appears that the knowledge of the SCM (Spatial Covariance Matrix) of the asynchronous ICI plus background noise is an important issue. Generally, it is assumed that the SCM estimated by using training symbols. However, it is difficult to measure the interference statistics for a long time and training symbol is also not appropriate for MIMO-OFDMA system such as LTE. Therefore, a noise reduction method is required to improve the estimation accuracy. Although the conventional time-domain low-pass type weighting method can be effective for noise reduction, it causes significant estimation error due to the spectral leakage in practical OFDM system. Therefore, we propose a time-domain sinc type weighing method which can not only reduce the noise effectively minimizing estimation error caused by the spectral leakage but also implement frequency-domain moving average filter easily. By using computer simulation, we show that the proposed method can provide up to 3dB SIR gain compared with the conventional method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.7-13
• /
• 2011

This paper presents a Time-to-Digital Converter which is a key block of an All-Digital Phase Locked Loop. In this work, a Vernier Delay Line is added in a conventional Gated Ring Oscillator, so it could get multi-phases and a high resolution. The Gated Ring Oscillator uses 7 unit delay cell, the Vernier Delay Line is used each delay cell. So proposed Time-to-Digital Converter uses total 21 phases. This Time-to-Digital Converter circuit is designed and laid out in $0.13{\mu}m$ 1P-6M CMOS technology. The proposed Time-to-Digital Converter achieves 26ps resolution, maximum input signal frequency is 100MHz and the digital output of proposed Time-to-Digital Converter are 8-bits. The proposed TDC detect 5ns phase difference between Start and Stop signal. A power consumption is 8.4~12.7mW depending on Enable signal width.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.38-41
• /
• 2008

In this research, we propose a new method for tracking the release rate using the concentration data obtained from the sensor. We used a sensor network that has already been set surrounding the area where hazardous gas releases can occur. From the real-time sensor data, we detected and analyzed releases of harmful materials and their concentrations. Based on the results, the release rate is estimated using the neural network. This model consists of 14 input variables (sensor data, material properties, process information, meteorological conditions) and one output (release rate). The dispersion model then performs the simulation of the expected dispersion consequence by combining the sensor data, GIS data and the diagnostic result of the source term. The result of this study will improve the safety-concerns of residents living next to storage facilities containing hazardous materials by providing the enhanced emergency response plan and monitoring system for toxic gas releases.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.75-81
• /
• 2008

Purpose: To develop a solar concentrator having the reflecting surface with the 2m class diameter. Methods: In order to make the reflecting surface for the solar concentrator, the shape of the reflecting surface sector is required. So, first, we induced the formula that can produce this shape. After that, using Delphi 6.0 language, we developed a program which uses this formula and produces the shape and the numerical data of the reflecting surface sector with the input variables such as the external diameter of the reflecting mirror, the reflecting mirror's radius of curvature at the paraxial range, the number of reflecting mirror sector, the size of the center hole of the reflecting mirror, and the interval of the output data. Results: This program, which was developed to produce the shape and the numerical data of the reflecting surface sector, enables us to see the shape of sector on the monitor and to save the numerical data files for the shape of sector. As a result, the user of this program can easily access the numerical data of the reflecting surface sector. Conclusions: Developing the program which produce the reflecting surface sector used to make the reflecting surface of the solar concentrator, we could succeed in making the prototype products by applying it to the development of the real solar concentrator with the diameter of the 2m class.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.231-242
• /
• 2001

In 2-pass differential SAR interferometry(DInSAR), the topographic phase signature can be removed by using a digital elevation model(DEM) to isolate the contribution of deformation from interferometric phase. This method has an advantage of no unwrapping process, but applicability is limited by precision of the DEM used. The residual phase in 2-pass differential interferogram accounts for error of DEM used in the processing provided that no actual deformation exits. The objective of this paper is a preliminary study to improve DEM precision using low precision DEM and 2-pass DInSAR technique, and we applied the 2-pass DInSAR technique to Asan area. ERS-1/2 tandem complex images and DTED level 0 DEM were used for DInSAR, and the precision of resulting DEM was estimated by a 1:25,000 digital map. The input DEM can be improved by simply adding the DInSAR output to the original low precision DEM. The absolute altitude error of the improved DEM is 9.7m, which is about the half to that of the original DTED level 0 data. And absolute altitude error of the improved DEM is better than that from InSAR technique, 15.8m. This approach has an advantage over the InSAR technique in efficiently reducing layover effects over steep slope region. This study demonstrates that 2-pass DInSAR can also be used to improve DEM precision.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.33-53
• /
• 2010

This study has analysed riffle effect of shipbuilding business on regional economy in Jeonnam. For the analysis on connection to regional business, the most favored way to estimate economic effect of a certain industry in the nation and overseas, has been adopted. As a result of analysis, in case of 1,908,800 million won turnover in shipbuilding in Jeonnam, it would induce about 3,038,624 million won of production, about 940,656 million won of added value, about 13,361 employment and about 702,056 million won of income. Seeing production riffle effects of shipbuilding industry in Jeonnam on other businesses in the same area, it is found out to influence in order of on the primary industry metal products 458,784 million won, chemical products 128,250 million won, metal products 71,498 million won and on petrol and coal products 50,829 million won. Like this, shipbuilding industry is highly connected with metal and chemical industries, which make a cluster in eastern area of Jeonnam, suggesting that growth of shipbuilding industry in Jeonnam would maximize inter-industrial synergy effect in the region.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.360-375
• /
• 2019

This paper tries to study the ecosystem after constructing the network of the continuing transactions associated with distribution industry with the data of more than 50 thousands firms provided by the Korean enterprise data (KED) for 2015. After applying the clustering method, one of social network analysis tools, we find the firms in the network grouped into 732 clusters occupying about 80% of whole distribution industry sales in KED data. The firms in a cluster have most of their transactions with other firms in the cluster. But the clusters have smaller firm numbers in the cluster and sales portion of the biggest firms in the industry than the case of the manufacturing industry. The Input-output analysis for the biggest distribution firms show that the small and medium size enterprise(SME)s have very high sale dependency on a main firm in some clusters. This fact implies more efficient fair transaction policies within the clusters. And small number of big distribution firms have very high rear production linkage effects on SMEs or on the 10th or 31th group with high portion of SME employment. They should be considered important in the SME growth and employment policies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.323-332
• /
• 2019

The purpose of this study is to measure the effects on the regional economy from the Jeju International Wind Ensemble Festival. In order to examine the economic ripple effects of the festival, we examine its impact on the local economy using two regional (Jeju-National) industry-related models based on the 2013 Jeju Region Input and Output Table. We also compare how the Jeju International Wind Ensemble Festival is growing and affecting the regional economy through a comparison between 2017 and 2018. Comparing the results of a production-inducing and value added-effect analysis of the induced industries from investment expenditures for the Jeju International Wind Ensemble Festival, the production-inducing effects increased by 2.1 times-from 9.05 billion won in 2017 to 18.7 billion won in 2018. The value-added effect increased by 2.2 times, from nearly 4.3 billion won in 2017 to nearly 9.2 billion won in 2018. The analysis shows that the Jeju International Wind Ensemble Festival contributes greatly to an income increase for local residents. In order to enhance the effects of the Jeju International Wind Ensemble Festival, it is necessary to use policies that link culture and tourism in Jeju.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.243-250
• /
• 2021

In the medical field, applications of plasma are applied sterilize instruments mainly but with the advent of bio-plasma technology, the scope of application is expanding. Recently, In addition, high-density miniaturization with handheld is required for sophisticated procedures when irradiated directly or treated with non-standard conditions. Rosen-type PZT is a device with a structure that generates high voltage plasma by achieving voltage transformation through electro-mechanical coupling using piezoelectric effect.and is used in portable plasma generating devices as an advantage to increase energy density relatively. In this paper, Rosen-type PZT was modeled using equivalent circuits and was carried out and a plasma generating device for medical application was designed and prototype tested. Prototype plasma generating device generates an output voltage of 5.8 kV with 12V input power and is designed to operate at high voltage by applying the half-bridge topology power converter. The results of the study confirmed the availability of various medical devices, such as plasma jets or direct exposure equipment.