• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.199-209
• /
• 1994

Titanium tetra iso-propoxide와 Lead acetate trihydrate를 출발물질로 사용하여 제조한 졸을 현미경용 soda-lime-silica 슬라이드 유리, Si-Wafer 및 Sapphire 기판 위에 Dip-coating법으로 박막을 제조하였으며, 안정한 졸을 얻기 위하여 Acetylacetone을 첨가하였다. 졸의 점도, 조성등의 영향을 조사하였고, 조성변화, 막의 두께 변화, 열처리 온도에 따른 가시영역에서의 투과율과 굴절율 및 IR Spectra를 측정하였으며, $PbTiO_3$ 박막의 결정 생성 유무를 XPD로 검토하였다. 또하 EDX로 슬라이드 유리에서 박막으로의 확산 유무를 조사하였다. 제조된 졸은 20일동안 침전없는 안정한 상태를 유지하였다. 가시영역에서의 투과율은 열처리온도와 막의 두께가 증가함에 따라 감소하였고, flat한 투과특성을 나타내었다. 슬라이드 유리 위에 코팅한 $PbTiO_3$ 박막은 $600^{\circ}C$에서 열처리한 경우 Pyrochlore형이 나타났고, Si-Wafer와 Sapphire 기판 위에 코팅할 경우에는 $600^{\circ}C$에서 Pyrochlore형이 나타나기 시작하였으며, 열처리 온도가 높아짐에 따라 $800^{\circ}C$에서 $PbTi_3O_7$상이 나타났다.

• 공업화학
• /
• 제4권3호
• /
• pp.482-487
• /
• 1993

반응성과 성형성이 우수한 졸-겔법을 이용하여 비선형 광학물질인MNA(2-Methyl-4-nitro-aniline), Carbazole 1(5-Nitro-9-hydroxyethyl Carbazole), Carbazole 2(5-Nitro-9-ethyl Carbazole) 그리고 DR1(Disperse Red 1)을 Silica matrix에 조합시킨 유-무기계 복합박막을 제조하였다. 이들 유-무기계 복합박막의 열적 안정도와 분해정도를 비교한 결과 -OH기를 갖는 Carbazole 1과 DR 1이 열분해에 대한 안정성이 우수하다는 것을 알았다. Carbazole 1의 편극화 처리로 UV 흡광도의 현저한 감소가 일어났고 상온에서 전기장을 제거하자 UV 흡광도의 느린 회복이 발견되었다.

• 공업화학
• /
• 제4권4호
• /
• pp.739-745
• /
• 1993

본 연구에서는 제올라이트에 의하여 Cs 및 Sr을 분리하는 무기이온 교환계에 있어서 물질전달 특성을 규명하는데 중점을 두었다. Cs이온의 경우 선택도가 우수한 AW300 및 AW500 제올라이트, Sr이온의 경우는 4A, 13X 제올라이트를 각각 선정하여 물질전달실험을 수행하였다. 실험조건으로는 $25^{\circ}C$, 교반속도 300rpm, 제올라이트량 4g, Cs 및 Sr 용액의 농도, 부피는 각각 1000ppm, 2000ppm의 $0.5{\ell}$에서 회분식의 이온교환 방식을 채택하였다. 물질전달속도는 경막내 확산에 의해 지배됨을 알았으며, 경막 내 물질 전달계수는 $10^{-4}{\sim}10^{-3}cm/sec$, 입자내 겉보기 확산계수는 $10^{-8}cm^2/sec$의 차수를 나타내었다.

• 센서학회지
• /
• 제21권5호
• /
• pp.367-373
• /
• 2012

We fabricated a fiber-optic alpha/beta detector, which is composed of a sensing probe, a plastic optical fiber, a photomultiplier tube, and a multichannel analyzer, to obtain the energy spectra of radioactive isotopes. As inorganic scintillators of a sensing probe, a ZnS(Ag) film was coupled with a $CaF_2$(Eu) crystal for alpha and beta spectroscopy. In this study, $^{210}Po$ and $^{90}Sr$ were used as alpha and beta sources, respectively, and we measured the radiation energy spectra using a fiber-optic alpha/beta detector to identify alpha and beta emitting radionuclides for nuclear medicine application. Also, the variations of energy spectrum were obtained according to the length of plastic optical fiber.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.23-23
• /
• 2018

In this study, new titanium alloys were prepared by adding elements such as tantalum (Ta), zirconium (Zr) and the like to complement the biological, chemical and mechanical properties of titanium alloys. The Ti-40Ta-xZr ternary alloy was formed on the basis of Ti-40Ta alloy with the contents of Zr in the contents of 0, 3, 7 and 15 wt. %. Plasma electrolytic oxidation (PEO), which combines high-voltage sparks and electrochemical oxidation, is a novel method to form ceramic coatings on light metals such as Ti and its alloys. These oxide film produced by the electrochemical surface treatment is a thick and uniform porous form. It is also composed of hydroxyapatite and calcium phosphate-based phases, so it has the characteristics of bone inorganic, non-toxic and very high bioactivity and biocompatibility. Ti-40Ta-xZr alloys were homogenized in an Ar atmosphere at $1050^{\circ}C$ for 1 hour and then quenched in ice water. The electrochemical oxide film was applied by using a power supply of 280 V for 3 minutes in 0.15 M calcium acetate monohydrate ($Ca(CH_3COO)_2{\cdot}H_2O$) and 0.02 M calcium glycerophosphate ($C_3H_7CaO_6P$) electrolyte. A small amount of 0.0075M zinc acetate and magnesium acetate were added to the electrolyte to enhance the bioactivity. The mechanical properties of the coated surface of Ti-40Ta-xZr alloys were evaluated by Vickers hardness, roughness test, and elastic modulus using nano-indentation, and the surface wettability was evaluated by measuring the contact angle of the coated surface. In addition, cell activation and differentiation were examined by cell culture of HEK 293 (Human embryonic kidney 293) cell proliferation. Surface properties of the alloys were analyzed by scanning electron microscopy(FE-SEM), EDS, and X-ray diffraction analysis (XRD).

• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.106-111
• /
• 2018

할라이드 페로브스카이트 나노결정은 고색순도 및 우수한 발광특성을 바탕으로 LED 응용에 대한 연구가 활발히 진행되고 있다. 고온주입법을 통하여 $CsPbX_3$(X = I, Br, and Cl) 나노결정을 합성하였고 할로젠 이온의 조성 변화를 통하여 발광파장을 제어하였다. 고분자 바인더를 사용하여 녹색과 적색의 필름을 제작하였다. 합성된 나노결정 및 제작된 필름의 우수한 광특성을 확인하였고, 이를 InGaN 청색 LED칩에 적용하여 우수한 색영역의 wLED를 구현하였다.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.335-339
• /
• 2007

투명 polycarbonate(PC) 시트의 낮은 표면강도 문제를 극복하기 위해, 고굴절률을 보이는 유-무기 혼성 하드코팅 용액을 Sol-Gel 법을 이용하여 제조하였다. 코팅용액은 무기물 티타니아의 전구체인 TTIP(titanium tetraisopropoxide)에 유기물을 함유한 화합물인 GPTMS[(3-glycidoxypropyl) trimethoxysilane]를 첨가하여 제조하였다. 그 후 기재인 PC 시트에 스핀 코팅시키고, 열 경화 시켜 고굴절률을 보이는 하드코팅 필름을 제조 하였다. 코팅 용액 중의 GPTMS 함유량을 변화시킴에 의해 1.53-1.61의 굴절률을 갖는 코팅 막의 제조가 가능하였다. GPTMS의 첨가량이 증가할수록 코팅막의 굴절률은 감소하였으나, 연필경도는 증가하였다.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.219-226
• /
• 2007

Pre-construction primer (PCP), or shopprimer, have been applied to steel plates to control temporary corrosion during ship fabrication. For surface preparation at ship block stage, in common shipyard practices, welding beads, burnt and rusted areas shall be blasted or power tool cleaned and the contamination such as zinc salt shall be removed with blasting or power tool. Whereas, the sound film of PCP needs not to be removed or roughened as the paint having good compatibility with PCP is used for the first coat. In many cases, however, full blasting or sweep blasting on the sound PCP treated block assemblies was requested. There still has been argument about the legitimacy of this practice, thus, it is critical to evaluate the quality of the coating system applied on the sound PCP retained condition, comparing with the one applied on the full blasted or sweep blasted condition. In this study, two different epoxy systems for water ballast tank were applied on the surfaces with sound PCP condition, full blasted condition, and sweep blasted condition. Coating performances such as durability, anti-corrosion, cathodic disbondment resistance were evaluated. The test results clearly indicated that the sound film of PCP needed not to be removed or roughened as the paint having good compatibility with PCP based on inorganic zinc silicate.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.366-373
• /
• 2015

Sol-gel binder was prepared by hydrolysis and condensation reaction using boehmite sol and methyltrimethoxysilane as a function of aging-time. The coating slurry was composed of a plate-shape alumina in the sol-gel binder for the EPD process, in which particles dispersed in the slurry were deposited on the electrode under an electric field due to the surface charge. We studied the effects of three parameters: the content of boehmite, the aging time, and the applied voltage, on the physical, thermal, and electrical properties of the hybrid composite films by EPD. The amount of boehmite was 10 ~ 20 wt% and the aging time was 0.5 ~ 72, with a fixed amount of plate-shape alumina of 10 wt%. The condition of applied voltage was 5 ~ 30 V with a distance of 2 cm between the electrode during the EPD process. We confirmed that a structure of hybrid composite films of well-ordered plate alumina was deposited on the substrate when the film was prepared using a sol-gel binder composed of 15 wt% boehmite with 1 hr aging time and EPD at 10 V. The process shows a weight loss of 7% at $500^{\circ}C$ in TGA and a breakdown voltage of 8 kV at $87{\mu}m$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.215-219
• /
• 2004

Metal-chelate derivatives have been investigated intensively as an emitting layer and recognize to have excellent electroluminescence(EL) properties. We synthesized new luminescent material, 1,4-dihydoxy-5,8-naphtaquinone $Aiq_3$ complex($Al_2Nq_4$) and investigated the electrical optical properties. OLED has potential candidates for information display with merits of thickness, low power and high efficiency. Although the OLED show a lot of advantages for information display, it has the limit of inorganic(metal)/ organic interface. In this study, the two methods are used to study the interface of metal/organic in OLED. First, we treated $O_2$ plasma on an ITO thin film by using RIE system, and analyzed the ingredient of ITO thin film according to change of the processing conditions. We used the RDS and the XPS for the ingredient analysis of the surface and bulk. We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by using AFM. We fabricated OLED using substrate that was treated optimum ITO surface. Second, we used the buffer layer of CuPc to improve the characteristics of the interface and the hole injection in OLED. The result of the study for electrical and optical properties by using I V L T System(Flat Panel Display Analysis System), we confirmed that the electrical properties and the luminance properties were improved.